Stiskalnica za perforirane ploščice

Hess JULIA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Lrsdpfx Aoh E Sghekhsu Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lrjdpfx Aksiidm Noheu Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna višina: 6.000 mm, skupna širina: 1.750 mm, skupna dolžina: 2.820 mm, nosilnost na odsek shranjevanja: 500 kg, gradbena širina: 1.300 mm, trajanje garancije: 12 meseci, – Kontrola predizbire pladnjev z upravljanjem artiklov – Naprava izvira iz povezanega sistema dvigal – Stranske obloge jaška dvigala so bile naknadno izdelane – Na voljo 2 napravi – Pladenj velikosti 1300x825 mm, vsak z nosilnostjo 500 kg Lrsdozaqibjpfx Akhju

Stanje: rabljeno, Leto izdelave: 1992, - Combination unit with electronic shoe Ledpfx Aovxlqyekhjru - Lacquer sanding - Dust brush - Dust removal Used Manufacturer: Bütfering Model: AWS-E-1100 Year of manufacture: 1992 Machine no.: 2565571 Working width: approx. 1100 mm Passage height: approx. 160 mm Number of units: 1 piece Belt dimensions: 1900 mm x 1120 mm Feed speed steplessly adjustable: 2.5–12.5 m/min Extraction port diameter: 2 x 200 mm Required space: approx. 1700 mm x 2100 mm x 2100 mm Weight: approx. 2200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Lredsmkixwopfx Akheu Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Lsdpfxjy Egz Ss Akhoru Technical Specifications: Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Novi Pilous dvojni robilnik DB400Eco se odlikuje po najboljši funkcionalnosti in dolgi življenjski dobi zaradi masivne konstrukcije. Jasno berljiva in dobro postavljena lestvica. Dobava brez žaginih listov. Razvito, izdelano in kvalitetno preizkušeno v Evropi! Tehnični podatki: Prehodna širina: 400 mm Največja višina reza: 60 mm Največja širina reza: 350 mm Prilagoditev širine: ročno Premer žaginega lista: 2 x 300 mm, izvrtina 60 mm Hitrost vrtenja: 2850 min⁻¹ Lrodpsvrvgljfx Akhsu Širina reza: 3,2 mm Motor: 2 x 4 kW Hitrost pomika: brezstopenjsko 4 do 18 m/min Opcijska oprema: 2 laserja (1x fiksni, 1x nastavljivi) Dodatna oprema ni vključena v ceni (Simbolična slika)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, - One-sided/stationary frame and edge press - Gluing stand without frame press device - Working dimensions in mm as edge press: 2900 x 1600 - Working dimensions in mm as frame press: 2600 x 1600 (with option QJ 002) - External dimensions in mm: 3100 x 700 x 2150 (LxWxH) - 3 vertical, roller-bearing pressure beams with robust bevel gear units and abutments - Press stroke: 150 mm, pressing force: 2000 kg - Frame press device with left-hand abutment - Sliding carriage for width adjustment, with central locking system Lredpfxohd N Eqs Akhsu - 2 pcs. horizontal bevel gear units - Hold-down device with spindle pressing force - Undercarriage with 4 swivel castors (2 of them braked) - Finish: RAL 9002 grey-white, pressure plate and abutment RAL 5010 gentian blue

Stanje: rabljeno, Leto izdelave: 2021, Vpenjalka za predale - STROMAB STC 2500 B Ljdpfx Akjxg I Sljheru Tehnični opis: • Delovna zmogljivost: 2100 x 1000 mm • Št. 2 delovni postaji • Dvoročni varnostni gumb • Št. 8 pnevmatskih valjev, premer 115 mm • Potisk na valj: 700 kg • Št. 8 kotnikov iz litega železa, višina 170 mm Konfiguracija stroja: • Frekvenca: 50 Hz • Standard: CE • Električna napetost: trifazna 400 V

Stanje: novo, Leto izdelave: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as frame press: 2630 x 1610 - Usable dimensions in mm as edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy welded frame construction made from thick-walled profile tubes and laser-machined steel components ensure a torsion-free and dimensionally accurate press base frame (no bolted frame parts!) Lrodpfx Akjhd Nywohsu - With left-hand support, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handle - 3 roller-mounted, vertical pressure beams type SK made of thick-walled, electro-galvanized profile tubes with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in 50 mm hole grid. - Lower support with anti-fall safety feature, adjustable in 5 positions within a hole grid - Hold-down device with spindle pressing force - Chassis with 4 swivel castors (2 pcs. braked) - Powder-coated (glue-repellent) grey-white RAL 9002 pressure plate and support, gentian blue RAL 5010 - Quattra 1-SK version is equipped with comfort adjustment for the manual hydraulic press units and thus provides additional safety for the operator