Quattra Classik SK

Reinhold Beck Maschinenbau GmbH Quattra

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: Iaedpfxex D H Hce Acrew • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table Iajdpfshlp D Nsx Acrow - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Iaodjqgcdtspfx Acrjw Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: novo, Leto izdelave: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roll Shaft diameter: 40 mm Roll diameter: 152–162 mm Iaedpohgiuhofx Acrew Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Leto izdelave: 2025, stanje: novo, Standard configuration with column Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Iajdjgn Tzljpfx Acrsw Grinding tools available as options Request more information

Leto izdelave: 2008, stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table Iajdpfxomidyie Acrow – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line. Ijdpfx Aceg Rxhgersaw

Stanje: rabljeno,

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Infinitely variable speed: 200 - 1800 mm/min. Iasdsk Adl Hepfx Acrsw

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Container Rotator with 10 Ton Load Capacity - Infinitely variable speed control Iasdpfxsd Nmx Te Acrew - Hand and foot remote control - Suitable for diameters from 320 mm to 2,800 mm - Roller diameter: 300 mm - Speed: 6 - 60 m/h - Power: 2 x 0.55 kW