Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5660 x 2100 x 1900 mm Weight: 8,300 kg Total power requirement: 71.9 kW Four-Sided Planer – Moulder TIMBERMAX 6-23-GH HIGH-SPEED Iedov A Hqpspfx Abxeic - Planing width: 20 - 230 mm - Planing height: 10 - 160 mm - Min. workpiece length: 720 mm (single) / 280 mm (in series) - 6 spindles - Spindle diameter: 50 mm - Spindle speed: 7,000 rpm - Stepless feed speed: 10 - 60 m/min - Bottom planer shaft max. tool diameter: 140 - 180 mm - Right vertical shaft max. tool diameter: 140 - 250 mm - Left vertical shaft max. tool diameter: 140 - 250 mm - Top thicknessing shaft max. tool diameter: 140 - 250 mm - Second top horizontal shaft max. tool diameter: 140 - 250 mm - Second bottom horizontal shaft max. tool diameter: 140 - 250 mm Spindle sequence: 1. Bottom: 7.5 kW 2. Right vertical: 7.5 kW 3. Left vertical: 11.0 kW 4. Top: 11.0 kW 5. Second top: 11.0 kW 6. Second bottom: 11.0 kW - Feed motor: 11.0 kW - Feed height adjustment motor: 0.75 kW - Top spindle height adjustment motor: 0.75 kW - Total power: 71.9 kW - Compressed air connection max.: 6 bar - Extraction ports: 6 x 180 mm - Dimensions: L = 5660, W = 2100, H = 1900 mm - Weight: 8,300 kg INCLUDES: - Hard chrome-plated tables - CE standard, TÜV Rheinland certified - Pneumatic side pressure before left spindle - Lubrication pump - Pneumatic pressure on feed rollers - Feed system with cardan shaft drive - 3 driven pressure rollers in the table OPTION: - Infeed and outfeed mechanisation, net €19,500.00

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4750 x 1860 x 1760 mm Weight: 5650 kg Total Power Requirement: 47.25 kW Four-Side Planer / Moulder TIMBERMAX 6-23-RR - Planing width: 20 – 230 mm - Planing height: 8 – 160 mm - Minimum workpiece length: 720 mm (single piece) / 280 mm (in series) - 6 spindles - Spindle diameter: 40 mm - Spindle speed: 6800 rpm - Infinitely variable feed speed: 6 – 36 m/min - Bottom planing shaft, max. tool diameter: 125 mm - Right vertical shaft, max. tool diameter: 108 – 200 mm - Second right vertical shaft, max. tool diameter: 108 – 200 mm - Left vertical shaft, max. tool diameter: 108 – 200 mm - Top thicknessing shaft, max. tool diameter: 108 – 180 mm - Second lower horizontal shaft, max. tool diameter: 108 – 230 mm Spindle sequence: 1. Bottom: 5.5 kW 2. Right vertical: 5.5 kW 3. Second right vertical: 7.5 kW 4. Left vertical: 7.5 kW 5. Top: 7.5 kW 6. Second lower: 7.5 kW - Feed motor: 5.5 kW - Motor for height adjustment: 0.75 kW - Total installed power: 47.25 kW Iedsv A Hqvspfx Abxjic - Compressed air connection: max. 6 bar - Extraction ports: 6 x 150 mm - Dimensions (L=4750, W=1860, H=1760 mm) - Weight: 5650 kg INCLUDED: - Hard chrome-plated tables - CE conformity - Pneumatic side pressure before the left spindle - Lubrication pump - Pneumatic pressure for feed rollers - Feed system with cardan drive - Powered table rollers

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5250 x 1930 x 1860 mm Weight: 6,650 kg Total power requirement: 71.68 kW Four-Side Planer / Moulder TIMBERMAX 6-26-TT - Planing width: 30 - 260 mm - Planing height: 10 - 200 mm - Min. workpiece length: 840 mm (single) / 280 mm (in series) - 6 spindles - Spindle diameter: 50 mm - Spindle speed: 6,500 rpm - Infinitely variable feed speed: 8 - 36 m/min - Bottom jointer shaft max. tool diameter: 125 - 140 mm - Right vertical spindle max. tool diameter: 118 - 200 mm - Left vertical spindle max. tool diameter: 118 - 200 mm - Upper horizontal spindle max. tool diameter: 118 - 200 mm - Second upper horizontal spindle max. tool diameter: 118 - 200 mm - Lower horizontal spindle max. tool diameter: 118 - 250 mm Spindle sequence: 1. Bottom – 7.5 kW Iedpjv A Hrgofx Abxjic 2. Right vertical – 11.0 kW 3. Left vertical – 11.0 kW 4. Top – 11.0 kW 5. Second top – 11.0 kW 6. Bottom – 11.0 kW - Feed motor: 7.5 kW - Height adjustment feed motor: 0.75 kW - Height adjustment top spindle motor: 0.75 kW - Width adjustment left spindle motor: 0.18 kW - Total power: 71.68 kW - Compressed air connection max. 6 bar - Extraction nozzles: 6 x 150 mm - Dimensions L=5250, W=1930, H=1860 mm - Weight: 6,650 kg INCLUDED: - Horizontal spindles with counter bearings (hydro tensioning) - Electric height adjustment for top spindles - Electric width adjustment for left spindle - PLC control with user-friendly touchscreen operation - Hard-chromed tables - CE compliant - Lubrication pump - Pneumatic pressure on feed rollers - Feed system with cardan shaft drive - Powered table rollers

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 5620 x 2200 x 2000 mm Weight: 12,000 kg Total power requirement: 94.5 kW Four-sided planer – Moulder TIMBERMAX 6-40 - Planing width: 50 – 400 mm - Planing height: 10 – 300 mm - Infinitely variable feed speed: 5–25 m/min - Spindle diameter: 50 mm - Spindle speed: 6000 rpm - 6 spindles - Bottom spindle min./max. tool diameter: 160 / 180 mm - Right spindle min./max. tool diameter: 160 / 230 mm Iiodpfxev A Hrte Abxec - Left spindle min./max. tool diameter: 160 / 230 mm - Top spindle min./max. tool diameter: 160 / 230 mm - 2nd top spindle min./max. tool diameter: 160 / 230 mm - Bottom spindle min./max. tool diameter: 160 / 230 mm - Max. saw blade diameter, 2nd top spindle: 300 mm Motor power: 1st bottom: 15.0 kW 2nd right: 11.0 kW 3rd left: 11.0 kW 4th top: 15.0 kW 5th top: 15.0 kW 6th bottom: 15.0 kW - Feed motor: 11.0 kW - Height adjustment motor: 1.5 kW - Total connected load: 94.5 kW - Horizontal spindles with counter-bearings / hydraulic tensioning - Top spindle electrically adjustable with feed system and digital display - Left spindle electrically adjustable with digital display - Control panel with PLC touch screen - Set of feed rollers Ø 180 x 40 x 110 mm - 5 powered rollers in the table - Infeed table length: 2000 mm, hardened version HRC60 - Compressed air connection: 8 bar - Extraction nozzles: 6 x 180 mm - Voltage: 400 V / 50 Hz - Dimensions: L=5620, W=2200, H=2000 mm - Weight: 12,000 kg

Stanje: novo, Leto izdelave: 2026, Feed motor 5.5 kW Total connected load: 58.3 kW Machine weight approx. 4,000 kg Four-side planer and moulder TIMBERMAX 420 SAW + 2 vertical spindles - Maximum planing width: 160 mm - Minimum processing width: 20 mm - Maximum sawing width: 200 mm - Maximum processing thickness: 120 mm - Minimum processing thickness: 15 mm - Minimum workpiece length (single feed): 650 mm - Minimum workpiece length (continuous feed): 480 mm - Max. stroke of moveable table: 6 mm - Max. travel of guide plate: 6 mm - Saw spindle diameter: 50 mm - Saw spindle keyway: 10 mm × 2 - Saw spindle speed: 4,000 rpm - Planing spindle diameter: 40 mm - Speed of lower planing spindle, left and right vertical spindle: 6,800 rpm - Speed of upper planing spindle: 8,000 rpm - Feed speed: 6–30 m/min - Feed roller diameter: 140 mm - Tool rotation diameters: Front lower cutterblock (straight knife): 125 mm Side knife diameter × outer thickness: 152 mm × 12 mm Right and left vertical spindle: 115–170 mm Upper planing spindle: 105–150 mm Saw blade diameter (left and right): 180–300 mm - Total motor power: 58.3 kW Front lower spindle: 5.5 kW Right vertical spindle, left vertical spindle, upper planing spindle: 7.5 kW each Saw spindle motor (left and right): 18.50 kW each Feed motor / rear auxiliary feed motor: 5.5 kW and 0.75 kW × 2 Crossbeam lifting motor: 0.75 kW Iiodpoyk H T Rsfx Abxec - Air pressure: 0.3–0.6 MPa - Compressed air requirement: 0.15 m³/min - Planing cutter diameter: 120 mm × 4 - Saw blade diameter: 150 mm × 2 - Extraction air speed: 30–35 m/s - Extraction air requirement: 150 m³/min - Dimensions (L × W × H): 4,500 × 1,530 × 1,720 mm - Machine weight: 4,000 kg

Stanje: novo, Leto izdelave: 2026, Working width 180 mm Feed motor 3 kW Machine weight approx. 2750 kg Four-side planer and moulding machine TIMBERMAX 4-18 - Maximum planing width: 180 mm - Minimum working width: 20 mm - Maximum working thickness: 110 mm Iedpfxjyk H U Ue Abxoic - Minimum working thickness: 8 mm - Minimum working length (single feed): 500 mm - Minimum working length (continuous feed): 250 mm - Maximum stroke of movable table: 6 mm - Maximum travel of movable guide plate: 5 mm - Cutterhead diameter: 40 mm - Speed of lower cutterhead: 6800 rpm - Speed of left and right vertical spindles: 8000 rpm - Speed of upper cutterhead: 8000 rpm - Feed speed: 10-45 m/min - Feed roller diameter: 140 mm - Tool diameter lower spindle: 125 mm - Tool diameter right and left vertical spindle: 115-170 mm - Tool diameter upper cutterhead: 105-150 mm - Power of front lower spindle: 5.5 kW - Right vertical spindle, left vertical spindle, upper cutterhead drive: 5.5 kW each - Upper cutterhead: 7.5 kW - Feed motor: 3 kW - Lifting motor for crossbeam: 0.75 kW - Air pressure: 0.3-0.6 MPa - Compressed air requirement: 0.15 m³/min - Planing knife diameter: 120 mm × 4 - Extraction velocity: 30-35 m/s - Extraction air requirement: 150 m³/min - Dimensions (L × W × H): 3000 × 1500 × 1600 mm - Machine weight: 2750 kg

Stanje: novo, Leto izdelave: 2026, Working length: 1000-1600 mm Working width: 40-150 mm Thickness: 10-80 mm WINTER Outfeed Table for a Four-Sided Planer ALT-1 Automating the material infeed and outfeed for planing machines significantly increases the work efficiency of both the machine team and the operators. Improved occupational safety is a key aspect of such an investment. Planing machines offer high throughput capacities, which can only be achieved with a uniform and continuous material feed. Manual feeding often does not ensure the required consistency and is very demanding for the operator. Furthermore, interruptions in material feeding frequently lead to machine downtime, reduced productivity, and quality losses. The automation systems offered are individually tailored to the needs and spatial conditions of the customer. Transverse buffers for material infeed as well as longitudinal feed devices with upper and lower drive rollers are available. We offer servo motors or hydraulic drives. For material outfeed, we offer sorting tables with ejectors or material pushers. Longitudinal sorting and buffering on crossbeams are also possible. We also provide stacking of planed material, including advanced planing processes. Machine control is based on the best Mitsubishi components available on the market. Material dimensions Length: 1000-6000 mm Iedpfeyk Iafex Abxoic Width: 40-150 mm Thickness: 10-80 mm Capacity up to 80 m/min Robust chain feed Adjustable frequency inverter speed

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 3040 x 1600 x 1680 mm Weight: 2800 kg Total power requirement: 21.25 kW Four-Sided Planer Moulder TIMBERMAX 4-18 DELUXE - Planing width: 20 - 180 mm - Planing height: 8 - 100 mm Ijdpfx Ajv A Hnnebxoic - Spindle diameter: 40 mm - Spindle speed: 6,800 rpm - Feed speed continuously adjustable: 8 - 33 m/min - Bottom cutterhead, max. tool diameter: 125 mm - Right vertical spindle min. / max. tool diameter: 115 - 170 mm - Left vertical spindle min. / max. tool diameter: 115 - 170 mm - Top thicknessing spindle min. / max. tool diameter: 105 - 150 mm - Jointing cutter max. diameter: 152 mm Spindle configuration: 1. Bottom: 4.0 kW 2. Right vertical: 4.0 kW 3. Left vertical: 4.0 kW 4. Top: 5.5 kW - Feed motor: 3.0 kW - Motor for height adjustment: 0.75 kW - Total connected load: 21.25 kW - Infeed table length: 2000 mm - Feed rollers Ø 140 x 35 x 50 mm - Compressed air connection, max. 6 bar - Extraction ports: 4 x 120 mm - Dimensions (L=3040, W=1600, H=1680 mm) - Weight: 2800 kg INCLUDES: - Hard chrome plated tables - CE standard, TÜV Rheinland - Pneumatic side pressure before the left spindle - Lubricant pump - Pneumatic pressure on the feed rollers - Feed system with cardan shaft drive - Powered table rollers (for wet timber)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 3810 x 1530 x 1525 mm Weight: 1650 kg Total power requirement: 24 kW Four-sided planer / moulder TIMBERMAX 518-U - Max. planing width: 180 mm - Min. planing width: 18 mm - Max. planing height: 120 mm - Min. planing height: 7 mm - Min. workpiece length for single pieces: 450 mm - Min. workpiece length for series: 350 mm - Number of working spindles: 5 - Spindle speed: 6000 rpm - Spindle diameter: Ø 40 mm - Head diameters: - Nominal diameters 1, 2, 3, 4, 5: Ø 125 mm - Jointing cutter: Ø 140 x 10 mm - Planer spindles 2, 3, 4, and 5: Ø 100 to Ø 180 mm - Cutter head length 1, 4, and 5: 190 mm - Cutter head length 2 and 3: 130 mm - Swivel angle of 5th head: 360° Isdpfx Abev A Hn Ioxeic - Feed speed: 6

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4191 x 2144 x 2000 mm Weight: 6,500 kg Total Power Requirement: 54.6 kW Four-Sided Planer & Moulder TIMBERMAX 5-33 - Planing width: 20 – 320 mm - Planing height: 8 – 230 mm - Infinitely variable feed: 5 – 25 m/min - Spindle diameter: 50 mm - Spindle speed: 6,000 rpm - Bottom shaft min./max. tool Ø: 110 / 145 mm - Right shaft min./max. tool Ø: 110 / 200 mm - Left shaft min./max. tool Ø: 110 / 200 mm - Top shaft min./max. tool Ø: 110 / 200 mm - 2nd bottom shaft min./max. tool Ø: 110 / 200 mm Spindle arrangement: 1. Bottom: 11.0 kW 2. Right vertical: 7.5 kW 3. Left vertical: 7.5 kW 4. Top: 11.0 kW 5. Bottom: 11.0 kW - Feed motor: 7.5 kW - Motor for height adjustment: 1.1 kW - Total connected load: 54.6 kW - Feed roller set: Ø 180 x 40 x 110 mm - Powered rollers in the table - Infeed table length: 2,000 mm - Compressed air connection: 8 bar - Voltage: 400 V / 50 Hz - Dimensions: L=4191, W=2144, H=2000 mm - Weight: 6,500 kg Includes: - Top shaft electrically adjustable with feed system and digital readout - Hard-chrome plated tables - CE standard, TÜV Rheinland certified - Lubricant pump - Pneumatic pressure on feed rollers - Feed system with cardan drive Iodpfx Abov A Hp Ssxeic - Powered sliding rollers in the table - Horizontal spindles with counter bearing (hydro tension)

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 6000 x 2280 x 2090 mm Weight: 9600 kg Total power requirement: 84 kW Four-Sided Planer – Moulder TIMBERMAX 6-33-TT - Planing width: 50 - 330 mm - Planing height: 8 - 250 mm - Minimum workpiece length: 700 mm (individual) / 300 mm (in series) - Continuously variable feed speed: 8-36 m/min - Spindle diameter: 50 mm - Spindle speed: 6000 rpm - Lower horizontal shaft min./max. tool diameter: 140 mm - Right vertical shaft min./max. tool diameter: 140 / 230 mm - Left vertical shaft min./max. tool diameter: 140 / 230 mm - Upper horizontal shaft min./max. tool diameter: 140 / 230 mm - 2nd upper horizontal shaft min./max. tool diameter: 140 / 230 mm - Lower horizontal shaft min./max. tool diameter: 140 / 230 mm - 6 spindles: 1. Bottom: 11.0 kW 2. Right vertical: 11.0 kW 3. Left vertical: 11.0 kW 4. Top: 15.0 kW 5. Top: 11.0 kW 6. Bottom: 11.0 kW - Feed motor: 11.0 kW - Feed height adjustment motor: 1.5 kW - Upper shaft height adjustment motor: 0.75 kW - Left shaft width adjustment motor: 0.37 kW - Total connected load: 84 kW - Feed rollers diameter: 180 mm Iodov A Hrmjpfx Abxoic - Driven rollers in the table - Compressed air connection: 8 bar - Extraction nozzle: 6 x 180 mm - Voltage: 400 V / 50 Hz - Dimensions: L=6000, W=2280, H=2090 mm - Weight: 9600 kg Including: - Electric height adjustment for upper shafts - Electric width adjustment for left shaft - PLC control system with user-friendly touchscreen - Hard chrome-plated tables - CE standard - Lubricant pump - Pneumatic pressure on feed rollers - Feed system with cardan shaft drive - Driven sliding rollers in the table - Horizontal spindles with counter-bearings (hydraulic clamping)

Stanje: novo, Leto izdelave: 2026, Number of spindles: 6 pcs Working width: 20–230 mm Planing height: 8–160 mm Four-sided planer moulder WINTER TIMBERMAX 7-23 DS - Planing width: 20–230 mm - Planing height: 8–160 mm - 6 spindles - Spindle diameter: Ø 50 mm - Spindle speed: 7,000 rpm - Infinitely variable feed speed: 6–60 m/min - Bottom spindle, max. tool Ø: 140–180 mm - Right spindle, max. tool Ø: 140–250 mm - Left spindle, max. tool Ø: 140–250 mm - Top spindle, max. tool Ø: 140–250 mm - Second top spindle, max. tool Ø: 140–250 mm - Bottom spindle, max. tool Ø: 140–250 mm - Second bottom spindle, max. tool Ø: 140–250 mm Spindle sequence: 1. Bottom: 11.0 kW Iedpjyk Icmjfx Abxoic 2. Right: 11.0 kW 3. Left: 11.0 kW 4. Top: 15.0 kW 5. Top: 15.0 kW 6. Bottom: 15.0 kW 7. Bottom: 15.0 kW - Feed motor: 11 kW - Height adjustment motor: 1.1 kW - Total power: 105 kW - Compressed air connection: max. 6 bar - Extraction outlets: 6 x 180 mm - Dimensions: L = 5,660 mm, W = 2,100 mm, H = 1,700 mm - Weight: 9,000 kg SCOPE OF DELIVERY: - Horizontal spindles with axial bearings (hydraulic head clamping) - Hard-chromed tables - CE and TÜV Rheinland certified - Pneumatic pressure before the left spindle - Lubrication pump - Pneumatic pressure for the feed rollers - Cardan shaft drive - 5 powered table rollers Tool set: - 1 x HM pre-scoring cutter 145 x 12.5 x 40 mm Z2 / V2 - 2 x aluminium planing heads 125 x 170 x 40 mm - 2 x aluminium planing heads 125 x 240 x 40 mm Set price: EUR 1,500 - Electrically adjustable top shaft with feed system: EUR 1,500

Stanje: rabljeno, Leto izdelave: 2012, Number of spindles: 5 pcs Working width: 20–230 mm Planing height: 8–160 mm Used WINTER Four-Sided Planer TIMBERMAX 5-23-U Year of manufacture: 2012 Serial no.: 12030 202 Technical data: - Planing width: 20–230 mm - Planing height: 8–160 mm - 5 spindles (4+1) – spindle Ø 40 mm - Speed: 6,000 rpm - Feed speed, infinitely variable: 5–30 m/min - Bottom surfacing shaft, max. tool Ø 145 mm - Right vertical shaft, max. tool Ø 200 mm - Left vertical shaft, max. tool Ø 200 mm - Top thicknessing shaft, max. tool Ø 200 mm - Universal spindle max. tool Ø 180 mm, max. saw blade Ø 250 mm (max. speed 3,500 rpm) Spindle sequence: 1. Bottom: 7.5 kW 2. Right vertical: 5.5 kW 3. Left vertical: 5.5 kW 4. Top: 7.5 kW 5. Universal shaft: 7.5 kW - Feed motor: 3.0 kW - Electric height adjustment motor: 1.1 kW - Total connected load: 37.8 kW - Infeed table length: 2,000 mm - Universal shaft swivels 360° - Compressed air connection: max. 6 bar - Extraction nozzles: 5 x 150 mm - Dimensions (LxWxH): 3,760 x 1,730 x 1,750 mm Iiedpfjyk Iddex Abxoc - Weight: 4,500 kg Including: - Hard-chromed tables - CE standard, TÜV Rheinland - Upper shaft electrically adjustable with feed system - Pneumatic side pressure before the left shaft - Lubricant pump - Pneumatic pressure on feed rollers - Feed system with cardan drive - 3 driven feed rollers in the table

Stanje: rabljeno, Leto izdelave: 1989, Štiristranski skobeljni stroj FUTURA ROTOMAT 220/5 s peto rezkalno gredjo Leto izdelave: 1989 Cena Ex Works Iijdpoxx Tb Njfx Abxjc

Leto izdelave: 2026, stanje: novo, Maximum tool diameter: 400 mm Maximum tool height: 310 mm Operating pressure: 2 bar ROTATHERM chamber washing systems are used throughout industry and trade for cost-effective cleaning of a wide variety of parts and materials. The parts are cleaned in a manner similar to a dishwasher. Placed in a wire mesh basket, they are washed from all sides in the closed unit by a hot alkaline solution spray. The machine is operated by selecting the desired temperature and wash duration. A centrifugal pump circulates the cleaning solution to the nozzle system, which simultaneously sets the basket in rotation (optional electric motor basket drive available). After the cleaning process is complete, the unit shuts off automatically. Parts can also be removed earlier; in this case, lifting the lid automatically shuts off the pump. ROTATHERM chamber washing systems are available at short notice in various sizes and configurations, and can be modified on request to meet special requirements. As a rule, water-based cleaners are used, but solvents can also be used in our cleaning machines. If required, the systems can be supplied in explosion-proof design. Technical details EMSA ROTATHERM "Mini" with tool holders for HSK: ----- Order no. 1.501 ROTATHERM industrial washing machine Stainless steel housing Basket diameter: 410 mm Usable height: 180 mm Load capacity: 50 kg Spray pressure without/with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Iijdpfx Aoyrtzdobxsc Tank capacity: 35 l Heating capacity: 2 kW Connected load: 2.5 kW Voltage: 220/230 V Frequency: 50 Hz Including the following accessories: Order no. 1.521 Surcharge for lid extension (usable height/max. tool length: 310 mm) Order no. 1.522 Tool holder for HSK 63F (for use with basket) Order no. 3.614 Detergent EM 40 – 10 x 10 l Packing on pallet ----- Price for the machine in the above configuration: on request! Options: ----- Tool holder for Powermat (for use with basket), price: on request! HSK 63 E holder, on request! Filter system (0.08 m²), price: on request! The ROTATHERM tool washing machine is also available in larger versions (Standard, Maxi and XL). All machines are also available with special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time may change! The stated values are reference values. Subject to technical changes. Delivery time: short-term and by agreement. All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical information as per manufacturer – subject to change!)

Stanje: novo, Number of sanding units: 2 pcs. Sanding width: 290 mm Iedpfjyrty Tox Abxoic Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single workpiece sander for sanding solid wood, such as window scantlings and similar items. Robust premium model featuring long cast iron tables, integrated brushing and finishing stations, and conveyor belt feed. Suitable for continuous heavy-duty work, even with higher material removal rates. - Offset arrangement of top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding over roller and pad for high stock removal and a consistently flat sanding area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and increased abrasive belt life - Forced, pneumatically-controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at tension rollers - Integrated brushing and finishing unit with large sanding dust extractor - Motorized sanding thickness adjustment via precision leadscrews and large linear ball bearing sets on hardened and ground precision shafts, with dust and dirt protection - Stock removal adjustment (bottom) via precision leadscrew with scale ring measurement display (resolution 0.1mm) - Abrasive belt tension with pneumatic cylinder for constant clamping pressure - Abrasive belt change with pneumatic release in seconds - Adjustable belt tracking for belt change - Electro-pneumatic compressed air monitoring - Workpiece infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty 1000 mm-long cast iron tables with superfine planed surfaces and spring-loaded, finely adjustable pressure rollers - Cardan shaft drive for jerk-free, uniform workpiece transport - Feed gear motor with stepless adjustment for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at workpiece infeed side - Digital thickness display (0.1mm resolution) with modern magnetic band system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2–180 mm - Two brake motors for main drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fibre brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm (w/o control panel) - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine on request! ----- Optional accessories at extra charge: Workpiece air blow-off - Air nozzles positioned above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off - Through nozzles positioned directly at the radius of the tension rollers within the extraction system, timer controlled, 5 seconds on/off, can be activated separately Disc unit ...

Stanje: novo, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single-piece wood sanding machine with additional cross brushing sanding unit (discs) and longitudinal brushing sanding unit (roller) for sanding solid wood such as window profiles, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET shoe for pre-sanding 2. Disc unit for cross-grain sanding / defibering 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing aggregates above and below - Direct-drive rubber-coated sanding rollers for slip-free power transmission - Combined sanding via roller and shoe for heavy material removal with consistently flat engagement zone - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy Iiodpfx Aboyrty Hoxoc - External cooling of sanding zones for cooler sanding and longer belt service life - Forced pneumatic oscillation control for sanding belts - Effective dust extraction directly at the sanding rollers - Fine dust extraction at tensioning rollers - Integrated brushing sanding device (cross and longitudinal) with dust extraction - Motorized sanding thickness adjustment via precision lead screws and oversized linear ball bearing assemblies on hardened and ground precision shafts with dust and dirt protection - Material removal setting on the bottom via precision lead screw with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Belt exchange with pneumatic belt release within seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for overthick workpieces - Workpiece transport on calibrated, slip-resistant, high-friction conveyor belts over heavy-duty 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - All motors electrically protected - Ergonomically arranged controls at the infeed side - Digital thickness display (resolution 0.1 mm) utilizing advanced magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units: Disc, max. diameter: 200 mm Roller, max. diameter: 270 mm - Extraction ports: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm Dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air blow-off - medium...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Proizvodna linija Weinig CONTUREX C 125, letnik 2018 Iiedpfsy Emrksx Abxjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Skupina krožnih žag Moč motorja: 3 kW Vrtljaji motorja žage: 3.000 vrt/min Premer krožne žage: 400 mm Največja višina reza: 125 mm ----- Čepljalni vreteno Količina: 01 Premer vretena: 50 mm Dolžina vretena: 320 mm Moč motorja: 7,5 kW Vrtljaji vretena: 3.200 vrt/min Iodsyk Df Depfx Abxjic Maksimalni premer orodja: 320 mm ----- Profilirni vreteni 2 kosa Premer vretena: 50 mm Dolžina vretena: 320 mm Moč motorja: 7,5 kW Vrtljaji vretena: 6.000 vrt/min Maksimalni premer orodja: 240 mm ----- Skupina za povratno predelavo letev Količina: 01 Premer vretena: 30 mm Moč motorja: 2,2 kW Vrtljaji motorja žage: 6.000 vrt/min Premer žaginega lista za povratno predelavo letev: 200 mm

Stanje: rabljeno, Number of spindles: 3 pcs. Number of tool sets: 8 pcs. Spindle diameter: 50 mm Dimensions (L/W/H): 4250 x 1850 x 2300 mm ! MACHINE FUNCTION TESTED AND READY FOR DEMONSTRATION ! !!! Detailed technical description from the manufacturer, additional machine images and machine videos – if available – can be found at the end of this technical description as an attachment !!! # 6988 Weinig Univar 6 CNC Spindles Overhauled ..... Technical Data Summary (For additional included accessories, please inquire) ... ... 1. Profiling Spindle (Climb-cut spindle with automatic plunge) ... > Climb-cut for tear-free rebating > Position: vertical right > Number of tools: 1 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 120 mm > Motor: 11.0 kW 2. Profiling Spindle ... > Position: vertical right > Number of tools: variable, CNC-controlled > Spindle stroke vertical: variable, CNC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 320 mm > Motor: 11 kW 3. Profiling Spindle (Fitting milling unit) ... Position: vertical right Spindle diameter: 40 mm Tool clamping height: 160 mm Motor: 3 kW Adjustment: radial and axial indexed to 8 positions via pneumatic turret Additional features ... > Online-capable > PC-Nexus screen control > Rebate carriage for milling sash frame widths under 500 mm. Automatic pneumatic clamping Extraction port diameter: Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Fitting spindle: 120 mm If the technical specifications of this machine do not meet your requirements, Isdpfx Ajymf Ekobxsic please contact us. Our experienced team will gladly assist you with potential modifications or help you find a machine that matches your needs! Technical specifications according to the manufacturer – without guarantee! All prices plus statutory VAT. Subject to changes and errors in the technical details and information.

Stanje: generalkompletno obnovljen (rabljeno), Elektronski vpenjalni stroj z elektronskim odpiranjem in zapiranjem. Z elektronskim odvzemom podatkov vzdolžne in prečne strani. Ijdpsyf D Dvefx Abxsic

Stanje: zelo dobro (rabljeno), Window production line WEINIG, Unicontrol 6, S/N 035-823, year 1997 Cross-cut saw, pneumatically indexed (3 kW) with laser alignment light Iiedpfjy Dud Ejx Abxec Grooving spindle 50 x 320 mm for 4 tools at 80 mm each – motor 11 kW Feed spindle 50 x 120 mm – motor 7.5 kW Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – motor 11 kW Fitting spindle, pneumatically indexed 40 x 160 mm – motor 3 kW Saw / grooving spindle, horizontal top, pneumatically indexed – motor 3 kW Feed adjustable from 6–12 m/min – motor 1.1 kW Screen control for 99 window types Support rail for muntin production, pneumatically indexed Studio window device with digital angle display Length stop up to approx. 3,500 mm Rebating unit with guide rail Return transport system to the machine operator Machine complete with operating manuals, circuit diagrams, and spare parts lists Tool set LEITZ, IV-78 SYSTEM IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Delivery: EXW Delivery time: short-term by arrangement Inspection: by appointment Payment: on notification of shipping readiness Subject to errors and prior sale.

Stanje: novo, Assembly line consisting of: Pos. 1.0 / RU-CBM 4000 Work Table with a 500mm extended guide rail for the additional installation of an aluminum bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table. Length 4000 mm, width 1400 mm, tilt angle of the working platform manually adjustable. Mounting bracket for fitting shears or fitting punch. 16 pivoting counter-holders for suspending sashes, fully pneumatically foldable for unrestricted movement of the sashes on the table surface. Device for detecting sash hardware length for constant and variable/central gear placement for already drilled sashes, visual size recognition of the fittings. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control system, pneumatic height adjustment, screw feeder device with automatic container shut-off (manual feed for a second screw length at the special screwdriver upon request). RA-8, turret stop for 8 screwing levels mounted on the carriage. Iiedpfxod Ih Huo Abxoc RA-4, turret stop for 4 different sash widths mounted on the pivoting table. Sash measurement detection pneumatically operated, detection range up to 2500mm with simultaneous clamping of the measuring system. PSF – Pneumatic clamping device for sashes. Working height adjustable from 900 – 1000 mm. Support table covered with felt. Guide rail extended to the left by 800 mm. Pos. 1.1 / 5035-1 Pneumatic swing mechanism for the work surface with foot valve Pos. 1.2 / 0500000 Bracket adapted for customer-provided punch/shears. For mounting a customer-supplied fitting punch or fitting shears (third-party make) on the sash assembly table. Please specify manufacturer when ordering!!! Pos. 1.3 / 5597-7 Travel device for RU-CBM on semi-circular guide rails. The running rollers are mounted left and right on the base frame of the table. Pos. 1.4 / 6354-6 3 double-meter semi-circular guide rails, 30 x 10 mm. Pos. 1.5 / 0730000 RU-SBL3000/40 hardware storage, free-standing, Length 3100 mm, depth 1250 mm, height 2200 mm, Support frame without front supports, 40 compartments, separated by dividing walls into 10 pieces per row, and one continuous shelf above, Compartment size: width 280 mm, height 150 mm. Pos. 2 RU-CSA-SMB aluminum bracket screwdriving machine with automatic screw feeding and manual feeding of the aluminum brackets from a mobile box with pneumatic positioning system, Screwdriver with depth stop with 4-position turret stop. Pneumatic adjustment in the y-direction against two 6-position turret stops. Feeder box for manual feeding of rotational or clip brackets in square form 18.5 x 18.5 mm. The bracket is manually pushed into a channel in the box and positioned in front of the screwdriver tip by a pneumatically actuated slide. Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm. Pos. 3 RU-S48-A6-350 column jib crane for chain hoist, with 6 m aluminum jib arm Version with base column, low-friction jib arm and manual push trolley for slewing and trolley travel by pulling and pushing on the load. Jib reach 6 m Structural height 4.461 m Lower edge of jib arm 3.722 m (upper edge of jib arm 3.9 m) Slewing range max. 270° Steelwork painted in RAL 7035 The base plate is mounted to the hall floor supplied by the customer with ...

Stanje: dober (rabljeno), Leto izdelave: 1996, obojestransko brušenje zgoraj-spodaj z brusilnim čevljem in prašno krtačo maks. širina brušenja 300 mm maks. višina brušenja 200 mm Iedsxfl Eaepfx Abxjic leto izdelave 1994 z oznako CE

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4150 x 1200 x 1650 mm Weight: 450 kg Total power requirement: 1.5 kW Double Mitre Saw WEGOMA DS110S Technical Data: - Working length: 3300 mm Iiedevz Ezwspfx Abxsc - Left head fixed - Hydropneumatic saw feed - Heads can rotate left and right - Mitre angles from 90° to 45°, suitable for compound cuts - Positioning via scale with clamping device - Air blow gun - Includes 2 carbide saw blades 400 x 30 mm - Motor: 1.5 kW - Voltage: 400V, 3~, 50Hz - Saw blade diameter: 400 x 30 mm - Saw blade speed: 3800 rpm - Min. cutting length: 500 mm - Max. cutting length: 3200 mm - Profile width/height at 45°: 140 x 120 mm - Profile width/height at 90°: 200 x 120 mm - Air connection: 6-8 bar - Size (LWH): 3900 x 1200 x 1650 mm - Weight: 550 kg Features: - Left saw head fixed; right saw head moves smoothly along precision ball bearings on hardened and polished shafts - User-friendly operation: Elgo digital display for position monitoring - Fine length adjustment for the right head and clamping units - Manual setting of saw head to 45°/90°/135°, locking by safety pins - Two-hand safety operation - Hydropneumatic saw blade feed - Pneumatic vertical clamping device - Pneumatic horizontal clamping device for stable sawing - Controller for cut lengths up to 3200 mm - Support for double profiles - Intermediate angles set manually via the angle scale on the table and secured by safety pin - Cooling spray system for aluminium workpieces - Suitable for large profiles – maximum width 200 mm Option: Digital Display DZ-FAHR on movable head EUR 1,440,-