Štiri stransko skobljalo

WINTER TIMBERMAX 4-18-S

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Kjdpfx Aehlp D Njf Todg - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Kjdpfx Afopqxnxe Tsdg

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Kdodswgwmnjpfx Af Tog Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), 4-Sided Planer Moulder with 5 Heads TOS Svitava Lignum 5-Head 4-Sided Planer/Moulder TOS Svitava Lignum 5-Head Planer/Moulder, 240 mm, with Grooved Table, Fully Refurbished FWH 225 mm, 23 kW total power Kedpondcg Nefx Af Tsdg

Stanje: kot nova (razstavni stroj), EXHIBITION MACHINE For sale is an almost new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This exhibition machine is in its original condition and comes with the full warranty. Technical specifications - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning device) - Center distance: approx. 715 mm (optionally extendable) - Spindle mount: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill stroke: 100 mm (with trapezoidal thread), prepared for ER-25 drill adapter - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight (floor-standing version): 166 kg The machine is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Kjdpfx Ajtpnawef Tsdg Shipping by freight forwarder: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Stanje: novo, Leto izdelave: 2022, Working width: 410 mm Planing height: 230 mm Cutterhead: Tersa Number of knives: 3 Height adjustment: Handwheel Planing thickness display: Scale Feed speed: 7 m/min Infeed roller: Steel Pressure bar: - Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Extraction connection: 100 mm Machine length: 800 mm Machine width: 700 mm Weight: 205 kg Kdedpfx Afoi Ezr Ej Tjg

Stanje: rabljeno, Leto izdelave: 2021, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 160 mm Kjdpfx Afowgwmhs Tedg Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000–6,000 rpm - Width and height are motor-positioned: left spindle: radial upper spindle: axial - Feed carriage motor-positioned DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15–230 mm Working height (with tool diameter 125 mm): 10–160 mm (with tool diameter up to 163 mm): 10–160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Grooving device: diameter difference 20–25 mm to planing head Important: The system cannot be operated without jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled...

Stanje: dober (rabljeno), Leto izdelave: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with individual 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter axial stops milled to 35 mm height 3. Left spindle with individual 7.5 kW motor Speed: 8,000 rpm with high-performance ball bearings, NC axis with frequency inverter radial pneumatic pressure guide left, for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC axis radial Ksdpfxjwyuluj Af Tjdg Pneumatic control axial, adjustment range 40 mm, glazing bead ejection, pneumatically sequenced - Feed system with 4 kW motor and feed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, workpiece monitoring, operator terminal, free-standing control cabinet, free-standing operator console, magnetic interlock for safety hood - Enhanced sound insulation - Automatic infeed and workpiece preparation system for various workpiece lengths and widths Workpiece dimensions: Length: 400–3,500 mm (up to 4,000 mm) Width: 40–200 mm Thickness: 20–100 mm Driven conveyor belt Belt width: 250 mm, conveying length: 4,500 mm, additional light barrier for signal transmitter Weinig Hydro Fine Planer Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC axis radial - First feed roller sequenced with photo cells - NC axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight-knife heads 501 with HSS planer knives 30 mm x 3 mm, max. 9,000 rpm, dim. 163 mm x 230 mm x 50 mm, Z=4

Stanje: novo, Tip MB6023HK Kdedpfsikv Acsx Af Tjg Delovna širina: 230 mm Delovna višina: 150 mm 6 vreten: spodaj - 4 kW, desno - 4 kW, levo - 5,5 kW, zgoraj - 7,5 kW, zgoraj - 5,5 kW, spodaj - 4 kW Premeri vreten: 40 mm Hitrost podajanja: 5–30 m/min Skupna moč: 38,25 kW Transportne dimenzije: 3750 × 1600 × 1500 mm Teža: 3400 kg Cena: 21.300 € (EXW Jonava, Litva)

Stanje: zelo dobro (rabljeno), Four-side planer WEINIG Unimat 500 Equipped with Memory System control, Three axes controlled from the operator panel (width, height, pressure beam position), Ribbed worktable, Cutterhead configuration and motor power: bottom head 7.5 kW, right and left heads 11 kW each, top head 11 kW, additional top head 5.5 kW, additional bottom head 5.5 kW, Maximum planing width: 230 mm, Maximum planing height: 120 mm, Fully adjustable spindles, Spindle diameter: 40 mm, Feed via Cardan shaft rollers with stepless speed adjustment, Central lubrication system, Kedpfjw Dn I Rjx Af Tjdg Machine in original, very good condition. Everything operates as it should. Machine dimensions: Length: 470 cm, Width: 200 cm, Height: 200 cm. Approximate weight: 3,000 kg.