Stroji za izdelavo oken nakup rabljenega (280)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Stroji za obdelavo lesa Stroji za izdelavo oken
Dražba
Se konča čez
d
h
min
s
Dražba zaključena
Gelderland
922 km
štiristranska skobeljna
LeadermacHYPERMAC 930
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, številka stroja/vozila: 2010016, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 300 mm, največja hitrost vrtenja: 6.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku!
TEHNIČNI PODATKI
Število vreten: 9 kos.
Vreteno 1 (spodaj)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 2 (desno)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 3 (levo)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 4 (zgoraj)
Moč motorja: 15 kW
Premer: 50 mm
Nedszdy Tpepfx Abrslc
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 5 (desno)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 6 (levo)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 7 (zgoraj)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Vreteno 8 (spodaj)
Moč motorja: 15 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Vreteno 9 (univerzalno)
Moč motorja: 11 kW
Premer: 50 mm
Hitrost vrtenja: 6.000 vrt/min
Orodje vključeno
Min. širina rezkanja: 20 mm
Maks. širina rezkanja: 300 mm
Min. višina rezkanja: 10 mm
Maks. višina rezkanja: 200 mm
Min. pomik: 6 m/min
Maks. pomik: 36 m/min
PODATKI O STROJU
Dimenzije in teža
Dimenzije (D x Š x V): 7.100 x 2.200 x 1.900 mm
Lastna teža: 12.000 kg
Transportni paketi: 1 kos.
OPREMA
CE-označba
CE-certifikat
Uporabniški priročnik
Operacijski sistem
Tehnični podatki
Električne sheme
Orodja za vretena 1-6, 8, 9
Mali oglas
Nemčija
394 km
Štiri-stranska skobeljnica Weinig Unimat Gold
WeinigUnimat Gold
Pokliči
Stanje: rabljeno, Rabljeni stroj
Godina proizvodnje: 2004
Oprema i tehnički podaci:
- Radni sati: cca 5000
Nlsdpfsyxyaujx Abrsc
- Širina blanjanja: 230 mm
- Visina blanjanja: 120 mm
- Broj vretena: 6
- Donja vretena: 2
- Desno vreteno: 1
- Lijevo vreteno: 1
- Gornja vretena: 2
- Raspored vretena: dolje / desno / lijevo / gore / gore / dolje
- Snaga motora u kW: 11 / 7,5 / 7,5 / 11 / 11 / 11
- Maks. broj okretaja vretena: 6800 o/min
- Promjer vretena: 40 mm
- Posmak: maks. 30 m/min
- Posmak: beskonačno podesiv
- Posmak: 4 kW
- Glavni motor: 11 kW
- Predrezni glodalo
- Površina stola kromirana
- Duljina ulaznog stola: 2000 mm
- Stolni valjci pogonjeni
- Pumpa za klizno sredstvo: ručna
- Pritisak odozgo: pneumatski
- Pogon: transportni valjci kardanski
- Ukupna priključna snaga: 80 kW
- Dimenzije: 4100 x 2050 x 1900 mm
Stroj se nudi bez alata, isti se mogu nabaviti kao rabljeni alati.
Dostupnost: kratkoročno
Lokacija skladišta: Röllbach
Mali oglas
Nemčija
394 km
Rezalnik za čepke Haberkorn FSZ 1
HaberkornFSZ 1
Pokliči
Stanje: rabljeno, Leto izdelave: 1996, Rabljeni stroj
Letnik proizvodnje 1996
Dobro vzdrževano stanje
s 3 pozicijami orodja
Nagibna miza za izdelavo studijskih oken in segmentov za okrogle loke
Natančen prikaz kota z digitalnim enkoderjem s prikazom na 1/10 stopinje
Avtomatski delilec lesnih ostankov ostaja v ravnini rezanja orodja pri vseh nastavitvah kota
Avtomatska kompenzacija dolžine s posebno vodilno tirnico in kompenzacijsko zatezno ročko
Hitro zaklepanje pri 90-stopinjski legi
Avtomatska menjava delilca lesnih ostankov po celotnem območju nihanja +/- 65 stopinj
Prečna žaga:
Vreteno nameščeno zgoraj
Trofazni električni pogon 3 kW
Premer vretena 30 mm
Število vrtljajev 2800 min⁻¹
Zaščitni in odsesovalni pokrov z odsesovalnim nastavkom 100 mm
Vreteno za rezkanje utorov:
Moč 7,5 kW
Število vrtljajev 4000 min⁻¹
Uporabna dolžina 300 mm
Premer vretena 50 mm
Maksimalni premer orodja 400 mm
2 x 100 mm hod za 3 pozicije orodja
Zaščitni in odsesovalni pokrov z odsesovalnim nastavkom 180 mm
Avtomatska zavora z nadzorom vrtljajev
vključno z merilnim sistemom dolžine LA-2000 na baterijsko napajanje
z LED prikazom z natančnostjo prikaza do 0,1 mm
z laserjem
Teža 850 kg
Nljdpjzalmzefx Abrec
Dimenzije 2250 x 1880 x 1800 mm
Dobavljivost: takoj
Lokacija skladišča: Röllbach
Mali oglas
Nemčija
394 km
Štiristranska skobeljna stroj Guilliet KXY
GuillietKXY
Pokliči
Stanje: rabljeno, Leto izdelave: 1994, Rabljeni stroj
Leto izdelave: 1994
Oprema in tehnični podatki:
- Dolžina ravnalne mize: 2100 mm
- Premer vretena orodja: 30 mm
- Premer skobeljnih glav: 100 mm
- Število vrtljajev skobeljnih vreten: 6000 vrt/min
- Delovna širina: 30 - 180 mm
- Delovna višina: 6 - 120 mm
- Moč motorjev spodaj, levo, desno: vsaka 3,7 kW
- Moč motorja zgoraj (debelina vretena): 5,5 kW
- Hitrost podajanja: 6 in 12 m/min
- Električna nastavitev višine
- Z nastavkom za natančno nastavitev 1/10
- Vključno s časovno nadzorovanim vstopnim valjem
- Vključno s skobelnimi glavami
- Priključki za odsesavanje: 160/120/120/140 mm
Nledpfx Aox Enrfjbrsc
Razpoložljivost: takoj
Skladišče: 63934 Röllbach
Mali oglas
Nemčija
394 km
Kopiranje usmerjevalnika
ElumatecAS 170
Pokliči
Leto izdelave: 1999, stanje: rabljeno, Rabljeni stroj
Letnik izdelave 1999
Veliko območje rezkanja kljub kompaktni zasnovi
Kopirno rezkanje po stranskih prislonih ali šabloni v razmerju 1:1
Dvojstopenjski pnevmatski kopirni zatič za dva različna premera rezkarjev
Patentirano vzmetenje kopirne ročice zagotavlja natančne izbere z majhnim naporom
Nastavljiva višina mize za izjemno visoke profile do 400 mm
Enostavna menjava orodja preko "Spindle lock"
Pnevmatska vpenjalna naprava za material
Dozirna pršilna naprava
Možnosti
Nedpfx Ajxqihiobrjlc
Kopirne šablone z gravuro za standardno luknjo in PZ-rezkanje
Kopirni zatič
Vpenjalna puša
Sistem prislona
Vpenjalna naprava z 2 vpenjalnima valjema
Rezkalno orodje 8 mm
Razpoložljivost: kratkoročno
Lokacija skladišča: Röllbach
Mali oglas
Nemčija
394 km
Obdelovalni rezkar za zatiče
SchneiderSK - Z 2
Pokliči
Stanje: rabljeno, Leto izdelave: 1991, Used machine
Year of manufacture: 1991
Features and technical data:
Nedpfx Aboxymfdorslc
- Designed for all window tooling systems up to 400 mm tool diameter
- The machine can be brought to a stop within seconds thanks to the standard braking systems (foot brake for slot spindle, automatic electronic safety brake for saw)
- The protective hoods for the slot spindle and crosscut saw are designed so that tools can be changed easily and without removing the hoods themselves
- The crosscut saw can be conveniently adjusted from the operator’s position via a quick adjustment mechanism; a six-position turret head allows for rapid switching to various dimensions
- The 40 mm slot spindle can be precisely height-adjusted using a conveniently located handwheel with 0.1 mm graduations
- The robust roller table combined with hardened and ground guides allows for smooth movement with minimal effort
- Slot spindle motor: 5.5 kW
- Slot spindle speeds: 3,000 / 4,500 rpm
- Spindle diameter: 40 mm
- Clamping length: 140 mm
- Slot spindle height adjustment: 100 mm
- Extraction port: 120 mm
- Crosscut saw motor: 2.2 kW
- Crosscut saw speed: 2,950 rpm
- Saw blade arbor: 30 mm
- Max. saw blade diameter: 400 mm
- Max. cutting height: 125 mm
- Pneumatic tool clamping
- With Festo-LAS stop
Weight: approx. 600 kg
Availability: short notice
Location: Röllbach
Mali oglas
Nemčija
650 km
Okenski sistem
WEINIGUnicontrol 11 NC mit Werkzeuge
Pokliči
Stanje: nepreverjeno (rabljeno), Schlitrska vretena 1 kos.
Število rezkalnih enot 5 kos.
Premer vretena 50 mm
Krmiljenje Weinig PC-Nexus
Weinig Unicontrol 11 linija za izdelavo oken z obsežnim kompletom orodij
-----
Opcijsko na voljo (z dodatnim doplačilom)
- Weinig Univar 6 stroj za prekrivanje spojev (cena na zahtevo!)
- Götzinger PowerDrill vrtalni in rezkalni center za okna in vrata (cena na zahtevo)
Tehnični opis proizvajalca:
-----
Poz. 1: Weinig Unicontrol 11 linija za izdelavo oken
-----
vključno z obstoječimi orodji
- IV 67 les in les-alu
- IV 77 les in les-alu
- IV 90 les
Krožna žaga za dolžinsko rezanje
-----
s svetlobnim laserjem za poravnavo, moč motorja 3 kW, premer vretena 40 mm,
hitrost vrtenja vretena elektronsko nastavljiva z zavoro 3.000–6.000 min⁻¹.
Največji premer kroženja orodja 400 mm
Premik v osi: 150 mm preko NC-osi
Radialni pomik pnevmatski na 8 položajev za zaokroževanje robov od zgoraj
Enota za zaokroževanje horizontalno spodaj
-----
Motor z zavoro: 1,5 kW, premer vretena 20 mm, vpenjalna dolžina 25 mm,
hitrost vrtenja 9.000 min⁻¹
Največji premer kroženja orodja 130 mm
Osi premika mehansko povezane z žago za dolžinsko rezanje
Radialni pomik pnevmatsko upravljan
Čepilna in utorna vretena
-----
S hidravlično vpetim nasprotnim ležajem
Moč motorja z zavoro: 15 kW
Premer vretena 50 mm
Hitrost vrtenja vretena 2.800 min⁻¹
Največji premer kroženja orodja 400 mm
Dolžina vpetja orodja 640 mm
Premik v osi: NC-os
Osnovni položaj pod mizo: 5–10 mm
Radialni hod: fiksno
1. profilno vreteno (vzporedni in nasprotni tek)
-----
Moč motorja z zavoro 11 kW
Premer vretena 50 mm
Hitrost vrtenja vretena 6.000 min⁻¹
Premer kroženja orodja min. 140 mm, max. 232 mm
Dolžina vpetja orodja 400 mm z nasprotnim ležajem
Premik v osi 350 mm NC-os
Radialni pomik NC-os
Osnovni položaj pod mizo: 5–10 mm
2 podajalni valji nasproti vretenu, aksialno pnevmatsko upravljani v 8 položajih
Profilna rezkalna enota horizontalno zgoraj
-----
Moč motorja z zavoro 3,7 kW
Premer vretena 40 mm
Vpenjalna dolžina 40 mm
Nledjy T R Tuepfx Abroc
Hitrost vrtenja vretena 9.000 min⁻¹
Največji premer kroženja orodja 130 mm
Nastavitev pnevmatska na 8 položajev aksialno in radialno
2. profilno vreteno
-----
Moč motorja 11 kW
Premer vretena 50 mm
Hitrost vrtenja vretena 6.000 min⁻¹
Premer kroženja orodja min. 140 mm, max. 232 mm
Dolžina vpetja orodja 400 mm z nasprotnim ležajem
Premik v osi 350 mm NC-os
Radialni pomik NC-os
Osnovni položaj pod mizo: 5–10 mm
Sinhronizirano vodilno ravnilo v prislonu z letvijo za podporo križev
2 podajalni valji nasproti vretenu, aksialno pnevmatsko upravljani v 8 položajih
Profilna rezkalna enota vertikalno desno na koncu stroja
-----
Moč motorja z zavoro 3,7 kW
Premer vretena 40 mm
Vpenjalna dolžina 160 mm
Hitrost vrtenja vretena 5.850 min⁻¹
Premer kroženja orodja min. 112 mm, max. 210 mm
Pnevmatska nastavitev na 8 položajev aksialno in radialno
Profilna rezkalna enota horizontalno spodaj
-----
Moč motorja z zavoro 3 kW
Premer vretena 40 mm
Vpenjalna dolžina 125 mm
...
Mali oglas
Tauberbischofsheim
555 km
Serija MEC rezkalnih strojev
DIVERSE
Pokliči
Stanje: rabljeno, Premer izvrtine 40 mm
Teža ~ 100 kg
Nlsdpfxozfaw Re Abrsc
Označevanje Brez ali MEC
Serija (približno 25 kosov) različnih rezkarjev in kombinacij rezkarjev, pretežno za MEC podajalnik ali brez označbe.
Mali oglas
Nemčija
661 km
Štiri stransko skobljalo
GuillietKXY
Pokliči
Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj
Letnik izdelave: 1989
Tehnični podatki:
Nledew I U Uqopfx Abroc
Dolžina ravnalne mize: 2100 mm
Premer orodnega vretena: 30 mm
Premer skobeljnih glav: 100 mm
Število obratov skobeljnih valjev: 6000 min⁻¹
Delovna širina: 30 - 180 mm
Delovna višina: 6 - 120 mm
Z opcijsko manjšo skobelno glavo za levi valj in ožjimi podajalnimi valji je mogoče doseči minimalno širino 15 mm
Moč motorjev spodaj, levo, desno: vsak po 3,7 kW
Moč motorja zgoraj (debelinec): 5,5 kW
Podajalna hitrost: 6 in 12 m/min
električna nastavitev višine
z 1/10 tip stikalom
Vključene skobelne glave
Priključki za odsesavanje: 160/120/120/140 mm
Razpoložljivost: kratkoročno
Skladišče: Flörsheim
Mali oglas
Nemčija
661 km
Štiri stransko skobljalo
GuillietKXY
Pokliči
Stanje: rabljeno, Leto izdelave: 1992, Used machine
Year of manufacture: 1992
Technical specifications:
Length of jointer table: 2100 mm
Spindle diameter: 30 mm
Cutterhead diameter: 100 mm
Cutter shaft speed: 6000 rpm
Working width: 30 - 180 mm
Working height: 6 - 120 mm
With an optionally available smaller cutterhead for the left shaft and narrower feed rollers, a minimum width of 15 mm can be achieved.
Motor power, bottom/left/right: 3.7 kW each
Motor power, top (thicknessing shaft): 5.5 kW
Feed speed: 6 and 12 m/min
Electrically adjustable height
with 1/10 incremental control
Incl. timed infeed roller
Njdpfx Ajxgkf Uobrelc
Incl. cutterheads
Extraction ports: 160/120/120/140 mm
Availability: short notice
Location: Flörsheim
Mali oglas
Cantù
455 km
Postaja za sestavljanje oken
OMGABA 525 A
Pokliči
Stanje: dober (rabljeno), Koda: 0407
Znamka: OMGA
Model: BA 525 A - CE Standard
Sestavljalni center za okovje vratnih in okenskih okvirjev - CE standard
Tehnični podatki:
Delovna miza prevlečena s filcem za zaščito pred praskami, zadnji del pnevmatsko nastavljiv od 0° do 10° z vmesnimi koti
Sestava:
Voziček s pnevmatskim vijačnikom z avtomatskim podajalnikom Böllhoff, delovni hod nadziran s pnevmatskim cilindrom in sistemom za vklop/izklop, nastavitev višine
Desni/levi omejevalniki za nastavljanje višine lukenj za kljuke (desna/leva stran)
Vrtalna enota s 3-svedrno glavo za izdelavo lukenj za kljuke
Pnevmatsko upravljane hidravlične škarje za rezanje okovja
Dimenzije delovne mize mm 3500 x 1230
Višina delovne mize mm 920
Nljdpfx Aszcqxnebroc
Maks. delovna dimenzija mm 2800 x 2450
Min. delovna dimenzija mm 350
Odsesovalec prahu
Delovni tlak 6/7 bar
Skupne dimenzije mm 3600 x 1700 x 1000 h
Teža kg 480
Mali oglas
Oberkochen
470 km
žaga za zasteklitvene letve
HECHTExenso DS350E - Video -
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Number of motors: 2 units
Working length: 3000 mm
Control: yes / CNC
Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm
Weight: 800 kg
HECHT Double Mitre Saw Exenso DS350E - 3000 mm
For wooden glazing bars, muntin bars, profile strips, aluminium strips, etc.
Item 1.1 Article number 942.5103
1 pc. HECHT Exenso DS350E
- Working length: 3000 mm
Nedpfjyy A Ikjx Abrslc
- Swivel range: 22.5° (internal) to 135° (external)
- Right head movable
- Saw blade mount: Ø 350 mm
- Including 1 pc. center support.
- Pneumatic clamping of aggregates.
- Position control Exenso DS3 with touch panel 15” display in
dust-protected monitor housing.
- 3-axis control: 1 longitudinal axis and 2 swivel axes.
- Manual entry of cutting data
- Processing of data from a cutting list (data set as specified)
- Processing of measuring tape data (wireless caliper GMF)
- Ethernet port 10/100 (TCP/IP)
- USB interface
- Including control cabinet, motor, and software licenses.
Item 1.2 Article number 942.5203
DS feed unit, hydropneumatic
Item 1.3 Article number 723.0121
2 pcs. DS saw blade wood
Bevel / bevel / flat tooth – positive
Item 1.4 Article number 942.5236
2 sets of DS workpiece clamping, combined
Combined workpiece clamping consisting of:
Pneumatic swivel clamp for clamping the material from above.
(Free access to the work table)
Horizontal pneumatic clamp – anti-twist clamping cylinder with pressure pad.
Clamps can be individually selected via saw’s control system.
Clamping sequence can also be set through the control system.
Including safety pre-clamping pressure
Scope of delivery for 2 sets:
- 2 pcs. (left/right) vertical swivel clamps
- 2 pcs. (left/right) horizontal clamps
Item 1.5 Article number 942.5241
DS350 table support, slotted (standard slot; special slots per customer specification upon request)
Item 3.1 Article number 945.2007
Packaging DS350 (transport frame)
-----
Total price for this configuration ex works – on request!
ALTERNATIVE OPTIONS, prices on request!
-----
For horizontal clamping of remnants when cutting square-cut glazing bars instead of
2nd set Item 1.3 943.5236 DS combined workpiece clamping!
Item 2.1 Article number 942.5201
ES / DS workpiece clamping from the front
- 2 pcs. anti-twist clamping cylinders
- 2 pcs. cylinder holders with clamping lever
-----
OPTIONAL accessories, at additional cost upon request:
-----
Item 4.3 Article number 942.5237
DS software “Overlength” (subsequent steps must be confirmed)
Process control incl. hardware. After input of a cutting length > max.
cutting length of the unit, the cutting will be cycle-controlled. (Left unit
cuts, right unit moves the material and cuts
to size.)
Item 2.1 Article number 944.1023
GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension)
incl. charger and receiver.
A robust aluminium measuring rail with a measuring range of 3,000 mm is
ideal for measuring glazing bars.
Functionality:
For use on doors and large window sashes, the GMF caliper can be
safely and quickly mechanically extended up to a measuring length of 3,000 mm.
Base length: 1,500 mm
Extension: 1,500 mm, automatic...
Mali oglas
Oberkochen
470 km
Okvirna stiskalnica
S&SBavaria 2000 L - Video
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Working width 4500 mm
Working height 3000 mm
Nodpfsyyqnfsx Abrjlc
Number of pressing cylinders 6 pcs.
Dimensions (L/W/H) 5500x1400x3550 mm
Weight 3000 kg
S&S Frame Press Bavaria 2000 L, Year 2026
-----
AVAILABLE AT SHORT NOTICE from stock Engelfried, 73447 Oberkochen!
INNOVATION for Holz-Handwerk 2026 in Nuremberg:
Now also with semi-automatic positioning of the vertical pressing cylinders 1, 2 and 3 via enabling button, incl. selector switch ON/OFF for beam 2
With automatic pressing cycle + manual control for corner joints (tenon & mortise and dowel joint/mortised tenon), switchable via selector switch on the control cabinet.
Comes standard ready for optional use of counter profiles if sashes are folded on the loose part.
CE version
Base machine in heavy-duty welded frame construction with thick-walled special hollow profiles.
Guide rails for pressing beams at the press corners in wear-resistant, machined design.
Fast, smooth, manual width adjustment via ball-bearing mounted carriage; fixable in 50 mm grid, optionally motorized width adjustment with hydraulic clamping (at extra charge).
Height adjustment and pressing by long-stroke cylinders in one operating cycle. Right press corners with integrated horizontal cylinders, thus no vertical positioning of horizontal pressing cylinders necessary, preventing cylinder collisions.
Lower abutment adjustable to optimal insertion height in several positions.
3 kW compact hydraulic unit with integrated control block, variable pressure regulation 20-120 bar, pressure gauge.
Control via pushbutton with separate circuits for vertical and horizontal pressing cylinders, mounted on mobile operating desk.
2 vertical double-acting pressing cylinders, stroke adjusted to working height, piston diameter 60 mm, max. pressure per cylinder 2100 kg
2 horizontal double-acting pressing cylinders, 80 mm stroke, piston diameter 40 mm, max. pressure per cylinder 1250 kg
Abutment and pressure plate depth 100 mm
Control cabinet at the left foot of the machine, 400 V, 50 Hz
Machine supplied with ready-to-connect 16 A plug
Paintwork: RAL 7035 light grey with RAL 7016 anthracite grey
Working size: length x height = 4,500 mm x 2,750 mm
Note: actual working size 4,500 x 3,000 mm (L x H)
Required space: 5,600 mm x 1,400 mm x 3,550 mm (L x W x H)
Article: Medium pressure beam complete with pressing cylinder, pressure hose and shut-off valve up to 2,750 mm height
Note: actual working height: 3,000 mm
Article: Single-pressure regulation for medium pressure beam, adjustable up to max. 100 bar (for pressing cross-bar windows)
Article: Continuously height-adjustable cross-pressure device, complete with pressing cylinder and abutment, throttle and shut-off valve
Article: Single-pressure regulation for cross-pressure device, adjustable up to max. 100 bar (for pressing cross-bar windows)
Article: Shut-off valve at the 3rd vertical cylinder
Article: Shut-off valve at the upper horizontal cylinder
Article: Shut-off valve at the lower horizontal cylinder
Mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 12 NC
Pokliči
Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Rezalna vretena 2 kosa
Število rezkalnih enot: 7 kosov
Premer vretena: 50 mm
Krmiljenje Weinig PC-Nexus
Weinig Uncontrol 12
z radialnimi in aksialnimi NC vreteni ter VARIO mizo
.....
Stroj je že strokovno demontiran in skladiščen v 73447 Oberkochen
Tehnični podatki - povzetek
(morebitna dodatna vključena oprema na povpraševanje)
.....
Krožna čelilna žaga
.....
> Elektronska čelilna žaga, vodoravno brezstopenjsko nastavljiva
> Število orodij: 1 kos
> Hitrost vretena: 3000-6000 vrt/min
> Premer vretena: 40 mm
> Največji premer orodja: 400 mm
> Moč motorja: 3,7 kW
> Laserska črta za zaznavanje reza
> Aksialni pomik 150 mm NC-os, elektronsko brezstopenjsko
> Radialni pomik pnevmatsko, 8 pozicij npr. za zaobljenje robov z vrha
Zaoblitvena enota
.....
> Položaj: vodoravno spodaj
> Aksialni pomik skupaj s čelilno žago.
Elektronski dolžinski prislon
.....
> Dolžina: 4.500 mm
1. Čepilno in rezalno vreteno
.....
> Število orodij: variabilno
> Moč motorja: 15 kW
> Premer vretena: 50 mm
> Dolžina vpenjanja orodja: 640 mm, z nasprotnim ležajem
> Aksialni pomik: 580 mm NC-os, brezstopenjsko
> Hitrost vretena: 2.800–4.000 vrt/min
> Premer orodja: 380–400 mm
> Protiprim, celotna vpenjalna dolžina je podprta
Nodpfx Abeyrtzkjrslc
2. Čepilno in rezalno vreteno
.....
> Število orodij: variabilno
> Moč motorja: 15 kW
> Premer vretena: 50 mm
> Dolžina vpenjanja orodja: 640 mm, z nasprotnim ležajem
> Aksialni pomik: 580 mm NC-os, brezstopenjsko
> Hitrost vretena: 2.800–4.000 vrt/min
> Premer orodja: 380–400 mm
> Protiprim, celotna vpenjalna dolžina je podprta
Transportni trak
.....
Za prenos delov v vzdolžno obdelavo, vključno z ločilnikom za dvojne dele pred vhodom v vzdolžno obdelavo.
1. Profilna vretena (sočasno in nasprotno vrtenje)
.....
> Položaj: navpično desno
> Število orodij: variabilno
> Moč motorja: 11 kW
> Premer vretena: 50 mm
> Dolžina vpenjanja orodja: 400 mm, z nasprotnim ležajem
> Aksialni pomik: 350 mm NC-os, brezstopenjsko
> Radialni pomik: 80 mm NC-os, brezstopenjsko
> Hitrost vretena: 6.000 vrt/min
> Minimalni delovni krog orodja: 140 mm
> Maksimalni delovni krog orodja: 232 mm
2. Profilna vretena
.....
> Položaj: navpično desno
> Število orodij: variabilno
> Moč motorja: 11 kW
> Premer vretena: 50 mm
> Dolžina vpenjanja orodja: 400 mm, z nasprotnim ležajem
> Aksialni pomik: 350 mm NC-os, brezstopenjsko
> Radialni pomik: 80 mm NC-os, brezstopenjsko
> Hitrost vretena: 6.000 vrt/min
> Minimalni delovni krog orodja: 140 mm
> Maksimalni delovni krog orodja: 232 mm
3. Profilna rezkalna enota (utorna enota od zgoraj)
.....
> Položaj: vodoravno zgoraj
> Moč motorja: 3,0 kW
> Premer vretena: 40 mm
> Dolžina vpenjanja orodja: 40 mm
> Aksialni pomik: 30 mm NC-os, brezstopenjsko
> Radialni pomik: 125 mm NC-os, brezstopenjsko
> Hitrost vretena:
Mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 12 NC
Pokliči
Stanje: nepreverjeno (rabljeno), Slot spindle 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial NC spindles, VARIO table, and trimming carriage
.....
Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen.
Video and photos were taken before dismantling.
Technical data summary
(additional accessories possibly included, please inquire)
.....
Crosscut saw
.....
> Electronic crosscut saw, horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
Nsdox H Al Nopfx Abrolc
> Motor power: 3.7 kW
> Laser alignment light for identifying saw cuts
> Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable
> Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above
Rounding unit
.....
> Position: horizontal bottom
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Max. tool diameter: 130 mm
> Axial adjustment mechanically linked with crosscut saw.
> Radial adjustment: pneumatically operated on/off
Electronic length stop
.....
> Length: 4,500 mm
1st Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-support: the entire clamping length is counter-supported
2nd Tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment: 580 mm NC axis, infinitely adjustable
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-support: the entire clamping length is counter-supported
Transfer belt
.....
For transferring parts to the longitudinal machining section, including
part separation for doubles infeed to the longitudinal machining.
1st Profiling spindle (climb and counter rotation)
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment: 350 mm NC axis, infinitely adjustable
> Radial adjustment: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
> Min. tool cutting circle: 140 mm
> Max. tool cutting circle: 232 mm
> 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions
> Table plate pneumatically controlled according to tool diameter
2nd Profiling spindle
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment: 350 mm NC axis, infinitely adjustable
> Radial adjustment: 80 mm NC axis, infinitely adjustable
> Spindle speed: 6,000 rpm
...
Mali oglas
Oberkochen
470 km
Fina in hidro skobeljnica
WEINIGUniplan 23
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Working width: 230 mm
Working height: 15–120 mm
Number of spindles: 2 pcs.
Weinig Hydro Planer Type Uniplan 23
-----
Machine factory-refurbished by Weinig in 2024.
Description:
For double-sided horizontal wood processing with 2 working spindles.
Spindle arrangement: horizontal, bottom and top.
Nodpfxoxpn Tzo Abrjlc
Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood.
Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates.
Machine fully enclosed with integrated sound and dust protection, including internal lighting.
Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1.
No other electrical regulations considered.
Machine includes operating tools, but no processing tools.
The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools.
Technical specifications:
Working width max.: 230 mm
Working height min.: 15 mm, max.: 120 mm
Feed motor: 3 kW (4 HP)
Each horizontal spindle: 7.5 kW (7.5 HP)
Feed speed, stepless: 6–36 m/min
Spindle speed: 7,200 rpm
Spindle diameter: 50 mm
Tool clamping length: 240 mm
Max. tool diameter: 163 mm
Fixed clamping offset below: 0.5 mm
(Technical data according to manufacturer – subject to change!)
Mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 10 NC
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc
Number of milling units: 4 pcs
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially
----
The machine was factory-refurbished by Weinig in 2024.
As part of this, the control system was replaced with a Siemens S7 677 C,
including a new “Touch” membrane panel.
With the following machining units:
Crosscut saw
----
with laser guide light, motor power 3 kW, spindle diameter 40 mm,
spindle speed 3,000 rpm
Njdoxpi Duopfx Abrolc
axial adjustment via NC axis
radial adjustment pneumatic, 8 positions for top edge rounding
Bottom-mounted unit for edge rounding
----
axial adjustment shared with crosscut saw
Haunching and tenoning spindle
----
motor power 15 kW
spindle diameter 50 mm
spindle speed 2,925 rpm
min. tool cutting circle 380 mm, max. 400 mm
tool clamping length 640 mm
axial adjustment via CNC axis
axial traverse path 580 mm
adjustment speed 100 mm/sec.
1st profile spindle (climb and conventional milling)
----
motor power 11 kW
spindle diameter 50 mm
spindle speed 6,000 rpm
tool clamping length 400 mm with counter bearing
axial and radial adjustment via CNC axis
2nd profile spindle
----
motor power 11 kW
spindle diameter 50 mm
spindle speed 6,000 rpm
tool clamping length 400 mm with counter bearing
axial and radial adjustment via CNC axis
Horizontal profile milling unit, top
----
motor power 3 kW
spindle diameter 40 mm
spindle speed 9,000 rpm
pneumatic adjustment in 8 axial and radial positions
Vertical profile milling unit, right, at machine outfeed
----
motor power 3 kW
spindle diameter 40 mm
spindle speed 5,850 rpm
pneumatic adjustment in 8 axial and radial positions
Additional accessories
----
CNC-controlled length stop, mounted on the tenoning table
for lengths up to 3,500 mm, including crosscut saw integrated into the control system.
Studio window facility, swivelling ±60°
Double workpiece package with automatic separation and transfer
Climb milling facility with window automation for rabbetting
Rabbetting carriage for small sash widths
Climate control unit in electrical cabinet
PC control NEXUS
Automatic turning system
Lamella conveyor including return belt for return of workpieces to the operator
(specifications as per manufacturer's information – subject to confirmation).
Mali oglas
Oberkochen
470 km
Stiskanje okvirja
HESSSpeedy
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Working width: 3,500 mm
Working height: 2,550 mm
Number of pressing cylinders: 6 pcs.
Loading dimensions (L x W x H): 4,500 x 950 x 2,900 mm
Hess Speedy frame press
-----
Will be overhauled
Max. insertion dimension / pressing length: 3,500 mm
Max. insertion dimension / pressing height: 2,550 mm
Sliding carriage for width adjustment, locking in 50 mm increments
Double-hole raster system
Electric height adjustment of long-stroke cylinders (hydraulic)
Support plate insertion height can be preselected in 4 positions
3 vertical pressing cylinders, stroke 1,000 mm
Pressing force per cylinder: 2,000 kN / 20,000 N
3 horizontal pressing cylinders, stroke 80 mm
Pressing force per cylinder: 1,250 kN / 12,500 N
Press plate depth: 100 mm, width: 140 mm
Raster cylinder fixing / support: 50 mm
Central pressure beam with shut-off valve
End-of-stroke pressure shutdown and post-pressurization control
Control and pressing sequence via push-button operation
Adjustable pressing pressure: min. 25 – max. 160 bar
Electrical connection: 2.2 kW / 400V
3 pcs. tilting pressure plates for angled windows
1 pc. tilting pressure plate for pointed windows
1 pc. extension for tilting pressure plate
1 pc. small parts kit
Nlodpexnqw Tjfx Abroc
Image and video are not original, but show an identical model
-----
(Technical data as per manufacturer – no liability assumed!)
Mali oglas
Oberkochen
470 km
Okenski sistem
HABERKORN,OKOMA,GOETZINGERFZS1,SF3F,OBM Plus
Pokliči
Stanje: pripravljen za uporabo (rabljen), Slot spindle 1 pc.
Number of milling units: 1 pc.
Spindle diameter: 40 mm
Small window manufacturing line consisting of:
-----
1) Haberkorn FZS1 slotting machine. Price: €12,500
2) Okoma SF3F spindle moulder with glazing bead saw. Price: €4,000
3) Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500
Timber window: 1 set IV 68/78/88 and 1 set timber-aluminium window IV 68/78, year 2011
4) Götzinger OBM Plus corner hinge and olive drilling machine, hardware Maco MultiMatic.
Price: €7,000
(Hardware can be changed for an additional charge on request!)
-----
Technical manufacturer description:
- Haberkorn FZS1 slotting machine with automatic feed
-Stepless height adjustment D 40 mm
Crosscut saw:
-Spindle arrangement: above
-Three-phase motor: 3 kW
-Spindle diameter: 30 mm
-Speed: 2800 rpm
Nedexa Hi Nepfx Abrelc
-Saw blade diameter: 400 mm
-Automatic brake with speed monitoring
-Horizontal positioning pneumatic, manually adjustable
-Guard and extraction hood with extraction port diameter: 100 mm
Slot spindle D 40 mm:
-Power: 7.5 kW
-Speed: 4200 rpm
-Effective length: 252 mm
-Max. tool diameter: 340 mm
-220 mm stroke, stepless height adjustment via precision ball screws
-Guard and extraction hood with extraction port diameter: 180 mm
-Automatic brake with speed monitoring
Studio table:
-Swivel range: +/- 65 degrees
-Automatically changing pressure block (programmable)
-Pneumatic clamp
-High-precision electronic angle display
-Automatic length compensation
-Pressure block always aligned in the cutting plane at any angle setting
Special features:
-Laser for workpiece positioning
-Saw position pneumatically adjustable
-Length stop LA 2500 mm + 1850 mm extension
-----
2) Okoma SF3F spindle moulder with lift spindle, 3 tools
-Extraction connection nozzles: 2 x 120 mm
-Spindle length: 270 mm
-Fence with fine adjustment and turret head
-Triple lift, max. stroke 90 mm
-Glazing bead trim saw with guard and extraction hood, 80 mm diameter
-8-roll power feeder with stand and pressure arm, required when configuring for glazing bead trim saw
-Pneumatically controlled crimping device for edge gear, speed 6000 rpm
-2x 3 kW motors
-Spindle bore diameter: 30 mm
-----
3) Oertli tooling for the Haberkorn and Okoma machines
-1 set timber windows IV 68/78/88
-1 set timber-aluminium windows IV 68/78
Sale of tools in the condition, scope and with the accessories as present in our stock. Note on window profiles, tool drawings, tool system lists:
Company Engelfried provides no guarantee that the actual tools present correspond to the specified and depicted systems.
-----
4) Götzinger OBM Plus corner hinge and olive drilling machine
-Corner and scissor hinge & handle hole drilling
-Vertical drilling unit with:
-Quick-change drill head system
-Pneumatic feed via foot pedal
-1x "olive" (handle) drill head 24 mm
-1x corner hinge double head
-Hardware: Maco MultiMatic
-1x adjustable folding stop, left, with 6 stops
-1x adjustable folding stop, right, with 6 stops
-1x machine stand complete with shelf
-220/400 V, 60 Hz, 1.3 kW
-1x roller conveyor approx. 1 m long, with 2 rollers
-1x roller conveyor approx. 1.5 m long, with 3 rollers
-----
Price of the ...
Mali oglas
Oberkochen
470 km
Stiskanje okvirja
SCHAFBERGER + SPROEDHUBERBavaria
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Working width: 3600 mm
Working height: 2600 mm
Number of pressing cylinders: 5 pcs.
Loading dimensions (L x W x H): 4400 x 1150 x 2970 mm
Weight: 3000 kg
Schafberger + Sprödhuber Bavaria Frame Press
-----
The machine will be overhauled by us prior to delivery
With automatic pressing cycle + manual control
For corner joints with tenon and mortise connections
CE-compliant version
Base machine features a reinforced frame-welded construction
with thick-walled special hollow profiles.
Guide rails of the pressure beams for the press corners
are manufactured for low wear.
Quick and easy manual width adjustment
Nedpjw T Un Uefx Abrolc
via ball-bearing mounted carriage, fixation
in perforated grid.
Height adjustment and pressing with long-stroke cylinders
in a single operation cycle. Right-side press corners feature
integrated horizontal cylinders, so no vertical positioning of the horizontal pressing cylinders
is necessary, thus preventing cylinder collisions.
The bottom abutments can be set to multiple positions
for optimal workpiece insertion height.
3 vertical double-acting pressing cylinders, stroke adapted to working height,
2 horizontal double-acting pressing cylinders
Abutment and pressure plate depth: 80 mm
Working dimensions: Length x Height = approx. 3,600 mm x 2,600 mm
Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (LxWxH)
Option:
ALWA pressing aids for angled windows
(Technical specifications according to manufacturer – no guarantee! Illustrations may differ from
the original, prices net, plus VAT (domestic).)
Mali oglas
Oberkochen
470 km
Stiskalnica s perforirano ploščo
HESSMultipress
Pokliči
Stanje: pripravljen za uporabo (rabljen), Working width: 3450 mm
Working height: 2000 mm
Number of pressing cylinders: 5 pcs.
Loading dimensions (L x W x H): 3600 x 1200 x 2720 mm
Hess Perforated Plate Press “Multipress”
Suitable for all types of angled, segment, and arched windows and doors. Also ideal for interior fittings or frame construction. Designed for the gluing of stair block assemblies and much more.
Largest working area approx. 3450 x 2000 mm
External dimensions approx. 3600 x 1200 x 2720 mm
The vertical perforated plate press is constructed from heavy-duty, torsion-resistant steel. Thanks to its simple, robust, and economical design, it offers a long service life.
The perforated plate is made of 10 mm thick steel sheet with a 50 mm hole grid. The pressing cylinders and support blocks feature self-locking mechanisms.
5 hand-operated hydraulic cylinders can be inserted as needed
on the perforated plate with built-in pump, 2000 kp pressure limiting valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke
Nodpfowqr R Ajx Abrjlc
4 individual fixed supports
(Technical data as per manufacturer – subject to confirmation!)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Oberkochen
470 km
Stroj za vrtanje in vstavljanje čepov
GÖTZINGER2 Stk. Bohr-Fraeszentrum
Pokliči
Stanje: nepreverjeno (rabljeno), Leto izdelave: 2013, Premer izvrtine, mm
Število vodoravnih vrtalnih glav, kos
Število navpičnih vrtalnih glav, kos
2 kosa Götzinger vrtalno-rezalnega centra
-----
Prodaja po naročilu stranke!
2 enaki stroji:
En stroj uporabljen za "leve" dele, drugi za "desne" dele.
Stroje je možno uporabljati tudi posamezno.
Nlodpfxsv N N Spe Abrjc
Stroje je upravljala programska oprema za izdelavo oken, lahko pa jih upravljate tudi preko
lastne programske opreme stroja.
Oba stroja imata enako opremo:
- Vrtalni agregat levo in desno za čelne izvrtine.
- 3 agregate za vrtanje in rezkanje vzdolžnih obdelav.
- Obdelovanci se vložijo le enkrat, nosilec agregata izvede različne operacije.
Namestitvena dolžina posameznega stroja cca 6 m.
Možna posamezna prodaja:
Cena na stroj: 10.000 EUR
Več informacij v priloženih PDF-jih.
Mali oglas
Oberkochen
470 km
Brusilni stroj
HESSGloria
Pokliči
Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 2 pcs
Sanding width: 190 mm
Maximum sanding height: 4–180 mm
HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE
-----
Manufacturer’s Description:
-----
Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification.
Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload.
Technical Specifications:
Nljdpfx Abov D Rg Djrsc
-----
Sanding belt speed: 24 m/sec
Sanding width: 190 mm
Sanding thickness: 4–180 mm
Minimum workpiece length: 300 mm
Feed speed: Infinitely variable 5–25 m/min
Sanding belt dimensions: 200 mm wide x 1600 mm long
Electrical connection: 400 V, 3/N PE, 50 Hz
Sanding units: 2 x 4 kW
Feed motor: 0.75 kW
Height adjustment: 0.18 kW
Pneumatic connection: R 3/8", 80 NL, 8 bar
Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec
Extraction connection sockets: 2 x 160 mm diameter, top of machine housing
External dimensions: Length: 1600 mm
...
Mali oglas
Oberkochen
470 km
Stroj za vrtanje vogalnih ležajev in oljk
HESSBohrstation
Pokliči
Stanje: pripravljen za uporabo (rabljen), Number of drilling motors: 1 unit
Corner fitting drilling: 1=yes, 0=no 1 yes
Olive drilling: 1=yes, 0=no 1 yes
1 HESS Fitting Drilling Station for Corner Fittings and Olives
This HESS drilling station offers extensive drilling technology at a low price for craftsmen. A complete station for drilling both corner fittings and olives, equipped with all essential features, including:
- 2 clamping cylinders
- Drilling depth sensing
- Effective extraction system
- Stop systems for corner fitting and olive drilling
- Drill head with quick-change chuck
- Adjustable drill feed speed
- Automatic program sequence
This means technology for perfect work: only one machine with a single drilling unit and one drill head for two operations.
System Description:
- Base frame as panel for frame and sash up to 100 mm
- Drilling unit centrally positioned, height-adjustable manually via threaded spindle
- Drill hole position and depth preset for the specific fitting type, adjustable via stop system when changing types
- Drill feed speed steplessly adjustable via throttle valve
- Direct extraction
- Electropneumatic control system with automatic program sequence for:
- Clamping the workpiece
- Start drilling motor
- Move drilling aggregate forward
- Drilling
- Return drilling aggregate
- Stop drilling motor
Nodpevu Hgzofx Abrjlc
- Release workpiece clamping
- Fixed stop systems
Standard Equipment / Technical Data:
- Sturdy base frame as panel, precise support made of wear-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick
- Corner fitting and olive drilling possible with one machine and one drilling unit
- Simple and convenient vertical operation, easy handling, no templates needed
- Minimal setup time for secure workpiece positioning
- Guaranteed precise and accurate boreholes
- 2 clamping cylinders for secure fixation of sash or frame, adjustable for different wood thicknesses
- Lateral rebate stop for corner fittings
- Ergonomically arranged stop system for olive drilling, with 14 swiveling stops and additional color coding
- Fixed stop system for hole height adjustment when switching from corner fitting to olive
- Automatic drilling depth sensing for both corner fitting and olive
- Drilling unit with quick-change chuck for different tools (corner fitting and olive). Tool change in no time
- Automatic program sequence
- Clean operation due to effective extraction
- Space saving and mobile thanks to steering/brake castors
Electrical equipment according to VDE regulations.
Electrical connection: 0.55 kW, 400 V, 50 Hz
Pneumatic connection: R 3/8", 4-8 bar
Extraction port: 1 x 100 mm diameter
Extraction speed: 25 m/sec
Required space:
Width: 2600 mm
Height: 1250 mm
Depth: 800 mm
Support height: 300 mm
Paint finish:
RAL 7030 stone grey with
RAL 1018 zinc yellow
1 drill set with 1 x 25 mm drill and 2 x 10 mm drills
additional 1 x 34 mm diameter drill
(Technical data according to manufacturer's information – subject to change without notice!)
Mali oglas
Oberkochen
470 km
Brusilni stroj
LÖWERDSM 2004 Video
Pokliči
Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 4 pcs
Sanding width: 190 mm
Maximum sanding height: 180 mm
Control: yes
Weight: 3,300 kg
Dimensions (L/W/H): 2,600 x 920 x 1,890 mm
Extraction port diameter: 2 x 180 mm, 2 x 120 mm
Double-sided sanding machine Löwer DSM 2004
-----
4-belt sanding machine + disc unit from above/below
Nedpfevu Hgbox Abrelc
Manufacturer's description:
-----
Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates.
- Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below
1. Belt sanding unit with heavy steel roller
2. Belt sanding unit with rubberized roller and pad
3. Finishing unit with fibre brush (see special equipment below)
- Directly driven sanding rollers for slip-free power transmission
- Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability
- Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life
- Positively guided, pneumatically controlled sanding belt oscillation
- Effective dust extraction directly at the sanding rollers
- Ambient dust extraction at tension rollers
- Integrated brushing and finishing device with large-volume dust extraction
- Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection
- Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm)
- Sanding belt tensioning by pneumatic cylinder with constant clamping force
- Quick sanding belt change with pneumatic belt release within seconds
- Adjustable belt tracking for sanding belt replacement
- Electro-pneumatic compressed air monitoring
- Infeed safety via contact roller for over-thick workpieces
- Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth, uniform workpiece feed
- Feed gear motor with stepless speed adjustment 4–20 m/min
- All motors electrically protected
- Ergonomically arranged controls
- Digital thickness display (0.1 mm resolution) with modern magnetic tape system
Technical data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1,800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2–180 mm
- Four brake motors for drive: 5.5 kW
- Feed motor: 1.5 kW
- Feed speed: 4–20 m/min
- Automatic height adjustment: 0.37 kW
- Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW
- Extraction ports: 2 x 180 mm, 2 x 120 mm
- Extraction air speed: 20 m/s
- Pneumatic connection: 6 bar
- Working height: 870 mm
- Length (with Softdisc: 2,740 mm), 2,600 mm
- Length with control panel (with Softdisc: 3,035 mm), 2,985 mm
- Width: 880 mm
- Height: 1,910 mm
- Weight: approx. 3,300 kg
- Operating voltage: 400 V, 50 Hz, 3-phase
- CE-compliant design
Equipped with the following options:
- Sanding belt air blast system (4-belt)
via nozzles directly at the radii ...
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.















































































































































































