Stroji za izdelavo oken nakup rabljenega (279)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Stroji za obdelavo lesa Stroji za izdelavo oken
Mali oglas
Oberkochen
470 km
Žaga za steklarske kroglice
HECHTES 350
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Število motorjev: 1 kos
Delovna dolžina: 2500 mm
Krmiljenje: ne
Enostranska žaga za zasteklitvene letve Hecht ES 350
-----
Zasuk pnevmatsko proti fiksnim omejevalcem.
Lrjdpfxsvpr N Ro Ahusn
45º/90º/135º
s pnevmatskim pomikom žaginega lista
pnevmatsko nihanje preko ročnega omejevalca
z nogo stroja, pnevmatska pritrditev
Žagin list HM 350 x 3,0/2,2/30 Z 100
Mere stojala za žago: dolžina 700 mm, globina 1.600 mm, višina 1.500 mm
Dotikalni omejevalec 1,5 m
Oporna površina 1,5 m z nosilcem
Dotikalni omejevalec 3 m
Podaljšek oporne površine z 1,5 m na 3 m z nosilcem
Vložki v mizo z utori za prekrivne zasteklitvene letve
HECHT ASB ročni dolžinski omejevalec z digitalnim prikazovalnikom, 2500 mm
Z odsesovalno napravo
(Tehnični podatki po navedbah proizvajalca – brez jamstva!)
Mali oglas
Aalen
471 km
Naprava za brizganje oken
FINITUREFenster und Tueren
Pokliči
Stanje: novo, Finiture lakirna linija za okna in vrata
-----
Kratek opis:
Poz. 1: 1x dvojna obešalna tirnica
Poz. 2: 1x vrtljivi sklop za nosilce z eno sklopko
Poz. 3: 1x "Superjet" potopna naprava
Poz. 4: 1x visokotlačni vlažilec
Lrodpfxoy D A Hhj Ahuon
Poz. 5: 1x naprava za ločevanje odpadne vode
Opcijsko:
Potopni kanal ali bazen (5–6 kadi)
Podroben tehnični opis in načrt — glejte pripeto PDF datoteko!
-----
Cena zgoraj navedene lakirne linije na povpraševanje!
-----
(Tehnične navedbe po proizvajalcu – brez garancije!)
Vse cene so brez DDV. DDV se obračuna posebej.
Mali oglas
Oberkochen
470 km
Brusilni stroj
HESSExpert
Pokliči
Stanje: nepreverjeno (rabljeno), Number of sanding units: 4 pcs
Sanding width: 190 mm
Max. sanding height: 4–180 mm
Weight: 4200 kg
Hess Expert 4-Belt Single-Piece Wood Sander
Ø Sanding from below and above
Ø Each with 2 staggered sanding units (top and bottom)
Ø Sanding units (top and bottom) connected in series according to the precision planing principle
Ø Pre-sanding with coarse grit (calibration)
Ø Fine sanding with fine grit (finish)
Ø Central motorized height adjustment of the lower sanding units
Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units
Ø Oscillating belt use (during the sanding process)
Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums
Ø Oxide-ceramic sanding shoe for
- precise surface geometry
- no readjustment required
- permanent dimensional accuracy
- completely maintenance- and wear-free
Basic structure:
Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping.
Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units.
Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine.
Lrodpfx Ahjt Tqy Ejuen
Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment.
Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt.
Wood guiding at the infeed area for hard, double-sided...
Mali oglas
Aalen
471 km
Naprave za čiščenje orodja
EMSAROTATHERM Mini
Pokliči
Stanje: novo, Max. tool diameter: 400 mm
Max. tool height: 180 mm
Operating pressure: 2 bar
ROTATHERM chamber washing systems are used across all industrial and craft sectors for cost-effective cleaning of a wide variety of parts and materials.
The parts are cleaned in a manner similar to a dishwasher. Placed inside a wire mesh basket, they are washed from all sides in the closed unit by a heated detergent spray. The machine is started after preselecting temperature and wash duration. A centrifugal pump circulates the detergent solution through the nozzle system, which simultaneously sets the basket in rotation. (Optional: electro-motor basket drive)
After the cleaning process is complete, the unit shuts off automatically. Parts can also be removed early; in this case, the pump is automatically deactivated when the lid is lifted.
ROTATHERM chamber washing units are available at short notice in various sizes and versions, and can be adapted to specific requirements on request. Usually, water-based cleaners are used, but solvents can also be processed in our cleaning machines. If required, the systems can be supplied in explosion-proof versions.
Technical details EMSA ROTATHERM Mini:
-----
Basket diameter: 400 mm
Usable height: 180 mm
Load capacity: 50 kg
Spray pressure without / with filter: 1.5 / 2.3 bar
Recirculating volume: 2.5 m³/h
Tank capacity: 35 l
Heating power: 2 kW
Connected load: 2.5 kW
Voltage: 220/230 V
Frequency: 50 Hz
Dimensions
-----
Depth: 530 mm
Width: 650 mm
Lrsdpjyrtytofx Ahuen
Height: 630 mm
Weight: 48 kg
-----
Price for base unit in configuration described above: On request!
-----
Accessories:
-----
Order no. 1.521 Lid extension / max. tool length 310 mm
Order no. 1.522 HSK 63 F tool holder for change with basket
Order no. 1.523 HSK 63 E tool holder for change with basket
Order no. 1.524 Tool holder for Weinig Powermat for change with basket
Order no. 2.006 Small parts basket
Order no. 1.504 Filter unit (0.08 m²)
Order no. 1.510 Pressure gauge
Order no. 1.511 Electro-motor basket drive
Order no. 1.512 Transport frame
Order no. 1.513 Castors
Order no. 1.514 Extraction unit
Order no. 1.516 Oil separator / belt skimmer
Order no. 1.518 System entirely in stainless steel
Order no. 1.519 Nozzles in stainless steel
-----
Prices: On request
The ROTATHERM tool washing machine is also available in larger models: Standard, Maxi, and XL.
All machines can also be supplied with special voltages. Surcharge on request.
When ordering accessories, the stated technical specifications and possibly the delivery time may change! The specified values are guidelines. Subject to technical changes. Delivery time: short notice and by arrangement.
All prices ex works plus packaging, transport, insurance, and statutory VAT.
(Technical specifications according to manufacturer – no guarantee!)
Mali oglas
Aalen
471 km
Dvojna poševna žaga
RAPIDDGS 200
Pokliči
Stanje: novo, Working length 4000, 5000 mm
Working height 120 mm
Tiltable: yes
Rapid DGS 200 Double Mitre Saw
-----
with saw blade diameter 420 mm, manual length adjustment with digital length display
Perfect dimensional and angular accuracy guaranteed.
We use precise and efficient drive technology for this:
Linear ball bearing guides for length adjustment, spring-mounted tilting units for convenient and safe angle adjustment between 45° and 90°. Both length and angle adjustment on this double-head mitre saw are performed manually. Enhanced operator comfort and productivity can be achieved by means of the digital length display.
Ljdpfsxmk Amjx Ahusrn
System features:
-----
- Manual length and angle adjustment
- Saw blade Ø 420 mm
- Robust welded frame construction
- Ball-bearing linear guides with long service life
- Hardened guide shafts
- Electronically balanced saw blade flange
- Direct-drive motor
- Tilting axis mounted on both sides
Digital length display:
-----
- Digital length display with 30 profile numbers and associated corrections
- Edit the 30 profile numbers (name + correction) directly via the display
- Correction calculated automatically according to saw angle (45° and 90°)
- Piece counter: If the length display changes by more than 0.1 mm, the piece count resets to "0"
- Stop for short parts: automatic conversion of length and profile height according to angle position
Application examples:
-----
Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements
- PVC, PVC-aluminium
- Aluminium
- Wood, wood-aluminium
Maximum precision thanks to twin-shaft guidance
-----
With 420 mm saw blades, a wide range of aluminium or PVC profile systems can be processed. Simple operation, maximum precision, and reliability make the DGS200 particularly attractive for insect screen frame production in small batches. The DGS200 double mitre saw is also popular as an entry-level model for window manufacturing. In the woodworking sector, the saw is used for cutting a variety of strips in furniture construction and interior design.
Technical data
-----
Drive: 2 x 2.2 kW three-phase motors, 400 Volt
Tilting range: manually adjustable 45° to 90°
Saw blade: 420 mm diameter
Cutting lengths: 4,000 mm, 5,000 mm
Profile clamping: 2 horizontal clamping cylinders
2 vertical clamping cylinders (optional)
Length adjustment: manual
Air pressure: 7 bar
Dimensions: 5200 / 1200 / 1500 mm
Weight: 800 kg
(Technical data as per manufacturer – no guarantee!)
Mali oglas
Aalen
471 km
Stroj za vrtanje in vstavljanje čepov
GÖTZINGERPowerDrill Typ BF 315 -Video-
Pokliči
Stanje: novo, Bore diameter variable mm
Number of horizontal drilling heads: 3 pcs.
Number of vertical drilling heads: 4 pcs.
Weight: 1,500 kg
Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm
Width with table extension: 2,300 mm
Götzinger Power Drill Type BF 315
With the Götzinger PowerDrill, depending on the setup and configuration, you can:
- Drill for handle olives in the loose frame part or for finished sashes,
with multi-spindle drilling head, quick-changeable, also for routing of
lock case recesses for RC 2/security transmission
- Drill for corner bearings in the loose frame part, with multi-spindle drilling head,
quick-changeable, orientation by stop or measuring (tilt windows)
- Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part
Ljdpod Ih Hqjfx Ahuern
- Milling vertically from above for handles, profile cylinders, 3D hinge hardware
- Horizontal drilling with 2 drilling units, different drill diameters,
dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions,
corner joints, front doors etc.
- Horizontal milling for lock case / hardware etc.
Machine Description
- Base frame in robust welded construction, linear guide for X-axis
- Table support 3,000 x 200 mm
- 6 pneumatic clamping cylinders with automatic retraction
- 2 side stops for end grain machining, manually retractable
- 2 longitudinal stops manually extendable/retractable
Travel Ranges:
- X-axis – 3,000 mm effective length
- Y-axis – 180 mm
- Z-axis – 105 mm
Units:
- 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor,
speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25
- 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor,
speed 3,000 rpm, with quick-change drilling head system
- 1 drilling head BKF 3, for olives, quick-changeable
- 1 drilling head BKF 3/2 for corner bearings, quick-changeable
- 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor,
1,500 - 16,000 rpm, collet chuck ER 25
- 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm,
collet chuck ER 20
- 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm,
collet chuck ER 20
Control: electro-pneumatic with 3-axis control X, Y, Z
NC Position Controller by B + R, input via 10" TFT display
Machine complete with 1 set of drill tools
Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm,
CE compliant, ready to connect
Extraction connection: 1 x Ø 120, 1 x Ø 80 mm
Power supply: 1 x 400 V, 16 Amps
Air supply: 1 x Ø 9 mm
OPTION:
Longitudinal stops right/left with NC axis high/low, programmable,
dimension input by rebate or light measurement possible
Dimensions:
L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg
-----
Total price in the above configuration, ex-works: upon request
Plus delivery and installation/training
(Technical information according to manufacturer – without guarantee!)
Mali oglas
Aalen
471 km
Brusilni stroj
LÖWERDSM 2004
Pokliči
Stanje: novo, Number of sanding units: 4 units
Sanding width: 190 mm
Lsdpfxjvnv Tqj Ahuern
Max. sanding height: 180 mm
LÖWER DoubleSander Solid DSM 2004
-----
Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates.
- Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below:
1. Belt sanding unit with heavy steel roller
2. Belt sanding unit with rubber-coated roller and pad
3. Finishing unit with fibre brush
- Direct-drive sanding rollers for slip-free power transmission
- Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy
- External cooling of sanding zones for cooler sanding and longer sanding belt life
- Forced, pneumatically controlled sanding belt oscillation
- Efficient sanding dust extraction directly at the sanding rollers
- Fine dust extraction at the tension rollers
- Integrated brushing and finishing device with large sanding dust extraction
- Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection
- Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm)
- Sanding belt tensioning via pneumatic cylinders with constant tension
- Rapid sanding belt change with pneumatic belt relaxation in seconds
- Adjustable belt tracking during belt change
- Electro-pneumatic compressed air monitoring
- Infeed protection via contact roller for oversized workpieces
- Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth, even workpiece feed
- Feed gearbox motor with stepless speed control, 4-20 m/min
- All motors electrically fused
- Ergonomically arranged control elements
- Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2-180 mm
- Four brake motors for drive: 5.5 kW
- Feed motor: 1.5 kW
- Feed speed: 4-20 m/min
- Automatic height adjustment: 0.37 kW
- Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW
- Extraction nozzles: 2 x 180 mm, 2 x 120 mm
- Extraction airspeed: 20 m/s
- Pneumatic connection: 6 bar
- Working height: 870 mm
- Length (with soft disc 2740 mm): 2600 mm
- Length with control panel (with soft disc 3035 mm): 2985 mm
- Width: 880 mm
- Height: 1910 mm
- Approx. weight: 3300 kg
- Operating voltage: 400 V, 50 Hz, 3 phase
- CE version
-----
Price for the above-mentioned machine available upon request!
-----
Optional accessories at extra cost:
Workpiece air-blow cleaning
- Arranged with nozzles above and below at the machine outfeed, pneumatically controlled
Sanding belt air-blow cleaning (4-belt)
- Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...
Mali oglas
Wymysłów
701 km
Profilni brusilnik Reckmann LM161
ReckmannLM161
Pokliči
Leto izdelave: 1986, stanje: zelo dobro (rabljeno), For sale: Reckmann LM 161 profile grinding machine. The machine is in very good condition and has seen little use.
Lrsdpfxouyg Rno Ahuon
Mali oglas
Tauberbischofsheim
555 km
Komplet orodij za okna Leitz IV 68/78
LEITZ
Pokliči
Stanje: rabljeno, Vrtina 40 mm
Premer kroženja 112–320,4 mm
Sistem rezil WP
Material jeklo
Komplet orodij za okna Leitz za izdelavo oken IV 68/78 v zelo dobrem stanju.
Komplet je namenjen ročnemu podajanju (BG-test) na miznih rezkalnih strojih ali podobnih strojih.
Lodpfx Aszc Rx Ishujrn
Idealno za mizarske delavnice brez lastne linije za izdelavo oken.
Mali oglas
Nemčija
812 km
Štiri-stranski skobeljni stroj Weinig
WeinigPFA 14/5
Pokliči
Stanje: rabljeno, Leto izdelave: 1969, Rabljeni stroj
Leto izdelave: 1969
Deluje brezhibno
Največja delovna širina: 170 mm
Največja delovna višina: 130 mm
1. vreteno: spodaj
2. vreteno: desno
3. vreteno: levo
4. vreteno: desno
Ljdpfxoxavtqs Ahuern
5. vreteno: zgoraj
Razpoložljivost: kratkoročno
Skladišče: Röllbach
Mali oglas
Nemčija
650 km
Okenski sistem
WEINIGUnicontrol 6 NC Spindeln
Pokliči
Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, Zarezovalno vreteno 1 kos
Število rezkalnih agregatov: 4 kosi
Premer vretena: 50 mm
Krmiljenje: Weinig PC-Nexus
# 7015 Weinig Unicontrol 6 z NC-vretni
-----
Stroj je še v uporabi do septembra 2026, možno ogledati
Tehnični podatki - povzetek
(dodatna oprema ob morebitni vključitvi na zahtevo)
Pozicija 1: Krožna odrezovalna žaga
-----
> Krožna žaga elektronska, vodoravno brezstopenjsko nastavljiva
> Število orodij: 1 kos
> Hitrost vretena: 2.800 min⁻¹
> Premer vretena: 40 mm
> Največji premer orodja: 400 mm
> Moč motorja: 3,0 kW
> Laser za označevanje reza
> NC merilo dolžine, nameščeno na zarezovalni mizi vključeno
Pozicioniranje krožne žage integrirano v krmiljenju.
> Dolžina: 3.500 mm
Pozicija 2: Orodje za čepa in zarezovalno vreteno
-----
> Število orodij: variabilno, nastavitev brezstopenjsko, NC-os
> Dolžina vpenjanja orodja: 320 mm
> Vertikalni hod vretena: variabilno, brezstopenjska nastavitev 254 mm, NC-os
> Hitrost vretena: 3.500 min⁻¹
> Premer vretena: 50 mm
> Največji premer orodja: 320 mm
> Moč motorja: 11 kW
Pozicija 3: 1. profilno vreteno (sukcesivno in nasprotno vrtenje)
-----
> Pozicija: navpično desno
> Število orodij: 1 kos
> Dolžina vpenjanja orodja: 120 mm
> Hitrost vretena: 6.000 min⁻¹
> Premer vretena: 50 mm
> Največji premer krožeče poti orodja: 232 mm
> Moč motorja: 7,5 kW
Pozicija 4: 2. profilno vreteno
-----
> Pozicija: navpično desno
> Število orodij: variabilno, nastavitev brezstopenjsko, NC-os
> Dolžina vpenjanja orodja: 320 mm
> Vertikalni hod vretena: variabilno, brezstopenjska nastavitev 254 mm, NC-os
> Hitrost vretena: 6.000 min⁻¹
> Premer vretena: 50 mm
> Največji premer krožeče poti orodja: 232 mm
> Moč motorja: 11 kW
Pozicija 5: Horizontalni zgornji profilni rezkalni agregat
-----
> Dolžina vpenjanja: 40 mm
> Premer vretena: 40 mm
> Moč motorja: 3,0 kW
> Hitrost: 5.850 min⁻¹
> Največji premer krožeče poti orodja: 130 mm
> Aksialni hod: 2 poziciji
> Radialni hod: 2 poziciji
Pozicija 6: 3. profilno vreteno (okovinsko vreteno)
-----
> Pozicija: navpično desno
> Dolžina vpenjanja orodja: 160 mm
> Aksialni hod: 3 pozicije
> Radialni hod: 2 poziciji
> Hitrost vretena: 5.850 min⁻¹
> Premer vretena: 40 mm
> Največji premer krožeče poti orodja: 210 mm
> Moč motorja: 3,0 kW
Dodatne značilnosti
-----
> možnost online povezave
> Sistem za povratno obrezovanje brez trganja
> Komplet za dvojne dele
> Povratna naprava za enega operaterja: lamelni transporter
> Zaslon s krmiljenjem
> Nastavitev za poševna okna
> Elektronski prikaz kota za poševna okna
> Industrijski PC, PC-krmiljenje/NEXUS
> brez obdelovalnih orodij
-----
Cena zgoraj navedenega stroja na zahtevo!
-----
Možnost z doplačilom: 6.500,00 EUR
Opomba k rabljenim orodjem:
Trenutno imamo rabljena Gold orodja, skladiščna št. #2790
Orodja za okna Gold IV78 za les in IV78 les/alu
uporabljena na Weinig Unicontrol 10, za uporabo na Unicontrol 6 dodatno potreben lepilni rezkar.
Komplet orodij za stroje z FIX-MOTION ali CNC vretenom, hoda 80 in 95 mm,
Lrodpfezdk Hyjx Ahuen
(komplet orodij, če je tehnično mogoče, pripravljen za IV92)
Komplet orodij za les-alu za stroje z FIX-MOTION, hoda 80 in 95 mm, dodatna orodja
1 komplet Stehle IV68 les vključen
Brez Gla...
Mali oglas
Poljska
653 km
OTT SOLID 16-32
OTTSOLID 16-32
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Laminirna stiskalnica, letnik 2007. Ta OTT SOLID 16-32 ima dimenzije plošč 3200 x 1600 mm in skupni pritisk 160 t z uporabno odprtino 400 mm. Če iščete kakovostne možnosti laminiranja, razmislite o našem stroju OTT SOLID 16-32, ki je naprodaj. Za dodatne podrobnosti nas kontaktirajte.
• Dimenzije plošč: 3200 x 1600 mm
• Skupni pritisk: 160 t
Ljdpfx Ahezdivcjuorn
• Uporabna odprtina: 400 mm
Mali oglas
Kežmarok
525 km
Kotni obdelovalni center za okna
WeinigUnicontrol 10
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set:
- 1 unit tenoning and slotting machine Weinig Unitec 10
- 1 unit profile and rebating center Weinig Univar 10
- Year of manufacture: 1998
- Cutter heads by OERTLI
Lrodpfjfzzhyex Ahuen
Available immediately.
Total price: €17,000. Condition: very good!
Mali oglas
Schwanberg
69 km
Stroj za izdelavo čepov
WEINIG051
Pokliči
Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine
WEINIG
Type 51
Swiveling studio window device with digital angle display
Roller table with automatic feed, 6 m/min
Roller table length approx. 2,100 mm
Pneumatic workpiece clamping
automatic counter block changeover
Crosscut saw
Pneumatically operated 4-position revolving turret
Motor approx. 3 kW / 380 / 400 V / 50 Hz
Saw blade diameter = 350 mm
Saw blade speed 2,800 rpm
Slotting spindle
Diameter D = 50 mm
Clamping length 320 mm
Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz
Spindle speed 3,000 rpm
Maximum tool diameter 320 mm
Length stop system
Machine including operating tools
Installation dimensions (L x W) approx. = 2700 x 2800 mm
Weight approx. 2000 kg
Lrjdpfov Tb Hgex Ahuen
Note on used machines:
• Technical specifications subject to error and prior sale.
• Stated prices are ex location – loaded free onto truck.
• The machine has been cleaned and function-tested.
• All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site.
• Special agreements are only valid in written form.
(We will only respond to inquiries including your address and telephone number!)
Mali oglas
Nemčija
650 km
Center za sestavljanje okenskih kril
STRIFFLERBeschlagtisch mit Regal
Pokliči
Stanje: nepreverjeno (rabljeno), Skladišče okovja da_da
Striffler miza za okensko krilo z okovjem
-----
- z avtomatskim vijačnikom in dovajanjem vijakov
- Regal za okovje
Lrsdpfx Ahjyn R Iysujn
- Preša za okovje Roto
(tehnični podatki po navedbah proizvajalca, brez garancije!)
Mali oglas
Nemčija
650 km
Okenski sistem
WEINIGUnicontrol 6
Pokliči
Stanje: nepreverjeno (rabljeno), Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Used Weinig Unicontrol 6 window manufacturing line
-----
Ledpfjx Tu N Hjx Ahusrn
For sale on behalf of a customer
Manufacturer’s description:
For the production of individual parts, elements, and small series.
Spindle configuration:
One crosscut saw, one single-sided tenoning and slotting spindle,
one right-side profiling spindle, one tenoning/slotting spindle, and
profiling spindle suitable for stacking multiple tools,
with pneumatic spindle movement.
Slotting table with motor-driven table movement and automatic
transfer into the continuous, chainless rubber roller
feed of the profiling unit; manual adjustment of feed height.
Workpiece clamping via 2 pneumatic clamping cylinders.
Length stop with scale and magnifier for adjusting outer frame or sash measurements.
Control of tool positions (longitudinal and cross machining)
via rotary switch at the control panel.
Technical data
-----
Crosscut saw
-----
Number of tools: 1
Spindle speed: 2,800 rpm
Spindle diameter: 40 mm
Max. tool diameter: 350 mm
Motor: 3 kW
Tenoning and slotting spindle
-----
Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92
Spindle speed: 3,500 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm
Max. tool diameter: 320 mm
Motor: 11 kW
Profiling spindle
-----
Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92
Spindle speed: 6,000 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm
Max. tool diameter: 232 mm
Motor: 11 kW
Special equipment:
Synchronised spindle
-----
Pneumatically actuated forward-back motion for tear-free profiling of window sashes, frames, and doors.
Spindle diameter: 50 mm, 4 kW
Tool clamping length: 120 mm, tool base diameter: 112–140 mm,
Max. tool diameter: 232 mm, spindle speed: 6,000 rpm
Motor upgrade for synchronised spindle from 4 kW to 7.5 kW
Screen control for 99 window types,
1 type can include up to 8 different parts, each with 2 end profiles
and 2 longitudinal profiles; manufacturing options: single parts, double parts,
by frame, series production, remachining. Data entry via keyboard with integrated
user guidance and error diagnostics.
1 Grooving spindle from above
-----
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm, feather key 10 x 4 mm
Mounting length: 13 mm
Clamping length: 40 mm
Axial stroke: 2 positions
Radial stroke: 2 positions
Max. tool diameter: 130 mm
Motor upgrade for grooving spindle from 2.2 to 3 kW
1 Hardware milling unit, right:
-----
For milling the hardware groove during contouring or grooving in the longitudinal profile.
Pneumatic horizontal movement with selector switch at the control panel.
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm
Clamping height: 125 mm
Tool cutting diameter: min. 140 mm, max. 180 mm
Base position below table: 10 mm
Special version of hardware milling unit:
Clamping length: 150 mm
Axial stroke: 80 mm, 3 positions
3 tools
Radial stroke: 2 positions
Motor upgrade for hardware milling spindle from 2.2 to 3 kW
Hardware milling spindle for 230 mm tool diameter in and above table
Electric height adjustment of the feed rollers with selector switch at the control panel for 2 wood dimensions, inclu...
Mali oglas
Nemčija
650 km
Brusilni stroj
STAEHLE-HESSGloria/Saturn E 180 RF
Pokliči
Leto izdelave: 2014, stanje: nepreverjeno (rabljeno), Število brusilnih agregatov: 6 kos
Širina brušenja: 180 mm
Največja višina brušenja: 150 mm
STAEHLE Brusilni stroj tip Gloria/Saturn E 180 RF
-----
Stähle Hess finiš-brusilni stroj tip Saturn E 180 RF (prej Gloria)
s 2 brusilnima agregatoma, dodatno zgoraj in spodaj Roto Finish brusilna naprava.
1 zgornji brusilni trak
1 spodnji brusilni trak
2 zgornji Roto-Finish brusilni napravi
2 spodnji Roto-Finish brusilni napravi
Lrodpfxex Dng Dj Ahuon
Podrobnejši opis glejte priložen PDF proizvajalca.
Prodaja po naročilu stranke.
Slike so iz našega arhiva in so bile posnete pred izdobavo stroja stranki.
(tehnični podatki po proizvajalcu – brez garancije!)
Mali oglas
Nemčija
650 km
Brusilni stroj
ECOLINEQ-SAND 6
Pokliči
Leto izdelave: 2022, stanje: nepreverjeno (rabljeno), Number of sanding units: 6 pcs.
Sanding width: 45-165 mm
Sanding height max.: 45-92 mm
Weight: 2,200 kg
Ecoline Q-SAND 6
For sale on behalf of a customer
-----
Long description as PDF attachment!
Short description:
Machine with infeed conveyor and automatic height detection. It features 2 top sanding discs and 2 bottom sanding discs, each combined with a brush unit.
Technical manufacturer description:
Ecoline Q-Sand: the ideal sander for scantlings and more.
Developed to operate on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, flap brushes, and a double disc for more effective material removal, improving adhesion for subsequent treatments. Q-Sand can be installed in a production line or used as a stand-alone solution due to its full operational autonomy. It is also ideal for window frames, beams, and bespoke products, optimizing processing times with automated systems and advanced production control.
-----
Price for the above-mentioned machine on request!
Lodsxyafkspfx Ahuorn
-----
(Technical data according to manufacturer - no guarantee!)
All prices are net, plus statutory VAT.
The video is from the manufacturer Ecoline and shows a new machine.
Mali oglas
Nemčija
650 km
Center za armature
EDER + MUELLERFluegelanschlagtisch
Pokliči
Stanje: nepreverjeno (rabljeno), Leto izdelave: 2018, Fitting support included
Working width: 3000 mm
Swivelling: no
Eder + Mueller sash mounting table
-----
Sale on behalf of customer, ex customer location.
Machine was in use until recently, now located at customer's warehouse.
Previous hardware: Maco Multi Matic (other hardware types possible)
Technical manufacturer’s description:
-----
Table height and working angle mechanically adjustable
with permanently mounted fitting support
Sash mounting table, length 3,000 mm, with fixed fitting support
Support surface with felt covering
12 swivelling counter holders for suspending the sashes
Hardware scanning for centred and constant gear position
1 shelf, 4-fold air connection
with automatic special screwdriver
with pneumatic depth stop
6-position turret stop for different screw depths
pneumatic height adjustment for 6 screw levels
automatic screw feed
manual insertion for second screw length
Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm
-----
Price for the above-mentioned machine on request!
-----
(technical data according to manufacturer – no guarantee!)
Lodpfx Ahexmamusuern
All prices quoted are net, plus statutory VAT.
Mali oglas
Bezau
412 km
Kotni obdelovalni center za okna
OKOMAUF 4 S
Pokliči
Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Stroj je popolnoma funkcionalen, opremljen z orodji za lesena in les-alu okna – vključite in začnite delati.
Lrsdpfx Ahezchaisuen
Mali oglas
Nemčija
650 km
Vrtljiva in nagibna miza
RUCHSERRU-4-SSP
Pokliči
Stanje: novo, Dimensions (L,W), mm
Weight approx. 90 kg
Height adjustable (yes/no): yes
Lift 300 - 800 mm
Worktable surface area 1,700 x 1,500 mm
Max. table width 3,800 mm
Payload approx. 130 kg
Ruchser RU-4-SSP rotary-tilting table
-----
Support surface 1700 x 1500 mm, maximum table width when extended 3800 mm,
pneumatically tiltable, weather leg recess,
with 6 storage boxes each with 2 compartments, pull-outs underneath for widening,
with 2 support feet and 2 flat clamping cylinders,
lifting device from 300 - 800 mm,
roller conveyor as setup surface, can be folded down.
Load capacity 130 kg.
Travel unit with 4 swivel castors with locking device (RU-4SSP)
2 stops for final inspection and sealing
Wing assembly fixture with tool tray and adjustable stop for angled positioning for RU-4-SSP
Lrjdpfxjvu Hfdo Ahuen
Holder for drill, screw gun, etc. with screwdriver holder
Travel unit with flanged rollers RU-DKFA and RU-4SSP
3 double metre travel rail for the travel unit 25 x 10 mm
-----
Price for the above-mentioned machine on request!
plus packaging and shipping
-----
(Technical data according to manufacturer's info - without guarantee!)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Wijchen
922 km
Štiri-stranske skobeljnice Weinig Unimat 500 leto 2006
WeinigUnimat 500
Pokliči
Stanje: rabljeno, Leto izdelave: 2006, skupna širina: 3.580 mm, skupna višina: 1.840 mm, Barva: siva
Lastna teža: 3.500 kg
Dimenzije (D x Š x V): 180 x 358 x 184 cm
Cena: na zahtevo
- Leto izdelave: 2006
- Dokumentacija na voljo: ne
- CE-oznaka prisotna: da
- CE-certifikat prisoten: ne
- Serijska številka: 106992
- Število vreten [kos]: 5
- └ Vreteno 1:
- Tip vretena: spodaj
- Moč motorja [kW]: 5,5
- Premer vretena [mm]: 30
- Največji premer skobeljnega bloka [mm]: 130
- Orodje prisotno: da
- └ Vreteno 2:
- Tip vretena: desno
- Moč motorja [kW]: 7,5
- Orodje prisotno: da
- └ Vreteno 3:
- Tip vretena: levo
- Moč motorja [kW]: 7,5
- Orodje prisotno: da
- └ Vreteno 4:
- Tip vretena: zgoraj
- Moč motorja [kW]: 7,5
- Orodje prisotno: da
- └ Vreteno 5:
- Tip vretena: spodaj
- Moč motorja [kW]: 5,5
- Orodje prisotno: da
Lrsdpfezguqzex Ahujn
- Največja širina skobljanja [mm]: 240
- Največja višina skobljanja [mm]: 130
- Dolžina dovajalne mize [mm]: 1780
- Premer dovajalnih valjev [mm]: 130
- Motor podajalnika [kW]: 3
- Sistem/programska oprema: pomnilniški sistem
- Pogon podajalnika: kardanski pogon
- Mazalni sistem: ročni
- Premer odsesovalnega priključka [mm]: 140
- Hitrost podajanja: ročno
- └ Največja hitrost podajanja [m/min]: 4
- └ Nastavitev hitrosti podajanja: brezstopenjsko
- Napetost [V]: 400
- Poraba toka [A]: 88
- Varovalka [A]: 100
- Moč [kW]: 41,0
- Transportne mere: 1800 mm x 3580 mm x 1840 mm (d x š x v)
- Transportna teža [kg]: 3500
- Število transportnih paketov [kos]: 1
Finančne informacije
DDV: Navedena cena je brez DDV
DDV/možnost odbitka: DDV je odbiten za podjetja
Dostava in odkup možna kadarkoli za vse industrijsko blago
Yorick Diebels
Mali oglas
Rattelsdorf
527 km
Kotni sistem
WeinigUnicontrol 12
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Unicontrol 12
Includes: Cross-cutting unit (Pos. A), Tenon and slot spindle (Pos. C), Transfer belt (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling unit right (Pos. P)
For the production of individual parts and elements in frame-based or serial manufacturing processes.
Consists of a cross-processing unit and a longitudinal processing unit, connected by a transfer belt.
Working width: 40–140 mm (see pressure guide left 40–140 mm)
Working height: 40–120 mm
Workpiece length min.: approx. 275 mm + 1 x end profile length
Longitudinal processing: approx. 220 mm + 2 x end profile length
Workpiece length max.: 3500 mm
Workpiece dimensions are dependent on machine configuration, manufacturing method, and tool assignment. Final definition of the part dimensions is only possible after receipt, review, and approval of the complete and finalized tool layout drawings.
Lrjdpfoumci Ssx Ahuon
Cross-machining:
Table feed motor power: 0.3 kW (0.4 HP)
Pre-set feed speed during cutting, profiling, and return: 3–25 m/min
Vario table with (studio window production possible)
The clamping length of all tenon and slot spindles can be used without tool changeover slots.
Workpiece clamping by means of a clamping bridge.
Operated by clamping cylinders mounted under the table.
Length stop NC controlled, mounted on the slotting table.
Studio window device swivel angle max.: +/- 75°
The minimum workpiece length for angled windows depends on the angle and the wood width.
Possible part dimensions when manufacturing angled windows:
Angle Max. Min.
Working width Workpiece length
+/-75° 80 mm 800 mm
+/-70° 120 mm 490 mm
+/-60° 240 mm 360 mm
+/-90° 350 mm 185 mm
For angles greater than 60°, only counter-processing is possible.
Commission not documented.
1) NC angle adjustment automatic for angled part processing
Tear-out protection via follow-up counter over the complete spindle length of the tenon and slot spindle for 90°processing. Manually adjustable counter wood strip for angled part processing.
2) Additional counter woods
Mali oglas
Wijchen
922 km
Štiri-stranski skobelni stroji Weinig Unimat 23EL 1998
WeinigUnimat 23EL
Pokliči
Stanje: rabljeno, Leto izdelave: 1998, skupna širina: 2.220 mm, skupna višina: 1.900 mm, Dimensiones (L x A x H): 450 x 222 x 190 cm
Precio: Bajo solicitud
- Año de fabricación: 1998
- Documentación disponible: No
- Marcado CE presente: Sí
- Certificado CE disponible: No
- Número de serie: 83929
- Número de husillos [uds.]: 5
- Husillo 1:
- Potencia del motor [kW]: 7.5
- Husillo 3:
- Potencia del motor [kW]: 11
- Husillo 4:
- Potencia del motor [kW]: 11
- Husillo 5:
- Potencia del motor [kW]: 7.5
- Dimensiones de transporte: 4500 mm x 2220 mm x 1900 mm (l x a x h)
- Paquetes de transporte [uds.]: 1
Información financiera
IVA: El precio indicado es neto más IVA
IVA/deducción de IVA: IVA deducible para empresas
Entrega y recompra posibles en cualquier momento para todo tipo de equipamiento industrial
Yorick Diebels
Lsdpfsxr U Nusx Ahujrn
Mali oglas
Wijchen
922 km
Štiri-stranski skobelni stroji Leadermac Compact LMC 723
LeadermacCompact LMC 723
Pokliči
Stanje: rabljeno, skupna širina: 2.600 mm, skupna višina: 1.900 mm, Unladen weight: 6,500 kg
Dimensions (L x W x H): 590 x 260 x 190 cm
- Special features:
- Description: Gas springs are weak
- Documentation available: No
- CE certificate available: No
- Number of spindles [pcs]: 6
- Spindle 1:
- Motor power [kW]: 7.5
- Spindle diameter [mm]: 40
- Planer shaft speed [rpm]: 6000
- Tool included: Yes
- Min. planing width [mm]: 15
- Max. planing width [mm]: 230
- Min. planing height [mm]: 10
- Max. planing height [mm]: 150
- Infeed table length [mm]: 1570
- Feed roller diameter [mm]: 140
- Feed motor [kW]: 5.5
- Extraction nozzle diameter [mm]: 120
- Options: Automatic feed system
- Feed speed:
- Min. feed speed [m/min]: 6
- Max. feed speed [m/min]: 24
- Transport dimensions: 5900 mm x 2600 mm x 1900 mm (L x W x H)
Lrjdsxlthiepfx Ahujn
- Transport weight [kg]: 6500 kg
- Packing units [pcs]: 2
Financial information
VAT: The indicated price is net plus VAT
VAT/margin scheme: VAT deductible for business customers
Delivery and trade-in possible at any time for all industrial equipment.
Yorick Diebels
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.





































































































































































































