Brusilni stroj

MAWEG HILDEBRAND Saturn Duo

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Bodpfeigadlex Ah Tewr Extraction nozzle 80 mm Pneumatic connection Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Refrigeration units Brand: Ers Bedpfxjd I Tlhe Ah Tswr Model: SC 110. V/5 Power: 8 kW Year of manufacture: 2000

Stanje: nepreverjeno (rabljeno), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Bwsdpjt Tqy Eefx Ah Ter Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Lakirna linija znamke System D8, dolžine 94,50 metra, kompletna z vleko, tirnicami in verigo. Bwsdpem D Hcfjfx Ah Ter

Stanje: novo, Product Description: Conveyor systems are one of the most crucial components used in automated coating lines. Our conveyor systems play a key role, transporting parts to be painted over distances measured in meters per day and kilometers per year. Heavy parts requiring coating are transported via belt conveyors, which operate for many years thanks to their durable bearings and cast steel chains. The load capacity ranges from 120 kg to 2 tons. • The operating principle of this conveyor type is based on moving suspended materials via chains and carriages that travel along an NPI profile using a drive unit. • WEBB-type conveyor chains are made from spheroidal graphite cast iron or forged steel and subsequently heat-treated. • Special roller bearings for carriages can be operated at 200°C. Lubricating grease on the carriage bodies maintains system lubrication. Bwodpfx Aedy Ewleh Tor • The drive system can be designed either as a crawler or a geared system, equipped with safety switches and traveling carriages. • Conveyor speed can be easily adjusted using a frequency controller. • The chain tensioning system consists of shoes and springs. Rollers and support wheels are used for belt turns.

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Manufacturer’s Description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Bwjdpfxjv D Rg Dj Ah Tor Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Stanje: novo, Cardan conveyors are carriage-type models that consist of four bearing groups moving within an enclosed rail. These types of conveyors are indispensable due to their vibration-free operation, automatic lubrication function, and robust design. The drive unit of the cardan shaft is mounted on top and is either of the caterpillar type or equipped with a side-mounted gearbox featuring a safety switch. The distances between the chain suspension points are 400 mm or multiples thereof, and there are several of them installed. Thanks to the centralized lubrication unit in the system, the chain bearings are automatically lubricated at the desired intervals. A torque limiter safeguards the conveyor system by protecting against overloads if the drive units become compressed and receive excessive force. The bearings mounted on the chain are capable of operating at 250°C. The conveyor chain tensioning system can be designed either with a spring or as a bolted system. The cardan conveyor rail is specially reinforced and precision-bent from sheet metal. Bwedody Eytjpfx Ah Tsr On long conveyor systems, more than one drive unit is used, and in such configurations, synchronized operation between the drive units is ensured. Depending on requirements, three types are available: Light-duty, Medium-duty, and Heavy-duty variants. • Cardan conveyors operate based on the movement of a cardan chain in three axes along the cardan rail. • Cardan-type drive units options: top-mounted caterpillar or side gearboxes with torque protection systems. • The distances between the chain hangers are 400 mm and multiples thereof. • With the central lubrication system, chain bearings are automatically lubricated at the desired time intervals. • The torque limiter protects the system against jamming and excessive pressure on the drives to safeguard the conveyor system. • The chain-mounted bearings operate reliably at temperatures up to 250°C. • The chain tensioning system is available either as a spring-loaded or bolted version. • The cardan conveyor rail is specially formed from robust sheet metal. • For long conveyor systems, more than one drive unit is used and synchronized operation between the drives is ensured. • Three design variants available, depending on customer needs.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1.790.230.010, Serial number: 1266 Operating pressure: 18 bar Mains voltage: 220V 2.0A Bedpfxsh U A A Eo Ah Tjwr

Leto izdelave: 2013, stanje: rabljeno, Anzahl der Schleifaggregate 4 st. Schleifbreite max. 200 mm Schleifhöhe max. 7-150 mm Vorschubgeschwindigkeit 8-16 m/min Schleifbandgeschwindigkeit 18-30 m/sec Stähle-Hess Schleifmaschine Saturn-Duo ----- Technische Herstellerbeschreibung: Stähle Hess Finish-Schleifmaschine Typ Saturn Duo mit 2 Schleifaggregaten, zusätzlich oben und unten Roto Finish Schleifeinrichtung. 1 oberes Schleifband 1 unteres Schleifband 2 obere Roto-Finish Schleifeinrichtung 2 untere Roto-Finish Schleifeinrichtung Werkstückabmessungen Höhe: 7–150 mm Breite: max. 200 mm Mindestlänge: 300 mm Bandgeschwindigkeit: 18–30 m/s (variabel) Vorschub 8–16 m/min (variabel) ----- Preis der o.g. Maschine auf Anfrage! Bwodpfey Spvlsx Ah Ter ----- Info: Maschine war in Verbindung mit einer Weinig Variomat Vierseitenhobelmaschine im Einsatz siehe Lager Nr. #7007 (technische Angaben laut Hersteller - ohne Gewähr!) Alle angegebenen Preise netto. zzgl. gesetzl. Mwst.

Leto izdelave: 2000, stanje: dober (rabljeno), Number: 0107058 Cooling capacity: 1,100 W at +6°C Cooling capacity: 1,270 kcal/h at +6°C Bsdjhri Ahjpfx Ah Tjwr Maximum temperature: 44°C Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg