Brusilni stroj

Staehle-Hess Gloria/Saturn E 180 RF

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Hnsdpfx Ahowyda Ueujl Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min Hedpfovu Hgbjx Ahuenl - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), I am selling window sets suitable for CNC window production centers: Hnsdpfx Ahsg Tumyouel LEUT wood-aluminum 110mm Hole 50mm. Complete set. Very good condition. Available as a set. Can also be purchased separately.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. Hnedpfsx Nqqxox Ahuol 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026

Leto izdelave: 1990, stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Hnodpfspqxnxox Ahuol

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy Hnjdpfxot Tqy Ee Ahusl - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: rabljeno, Leto izdelave: 2012, Integrated NC processing centre for windows and doors comprising: A) Automatic Loader, Model 'SP' Automatic loader for Base SP with 1 profiling machine - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from buffer to loading area of the profiling machine * Minimum workpiece length: 450 mm, maximum: 3200 mm * Minimum workpiece width: 40 mm, maximum: 230 mm * Minimum workpiece thickness: 40 mm, maximum: 120 mm * Working cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Group for bead recovery 2500 mm infeed height Feed speed 6–36 m/min via inverter Nr. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure roller in front of the planer with pneumatic disengagement from the control panel Pneumatic disengagement for the infeed unit before the planer spindle, controlled from the operator panel Tandem infeed group before the right vertical with quick release Feed units after the upper spindles to reduce trailing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical set-up for the use of automatic loaders Manual central lubrication Pump for lubricating the worktable with automatic drive Preparation for inline integration with INTEGRA SYSTEM - Working height increased to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick-change tool clamping system - Enables locking/unlocking of the tool using a simple air nozzle POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle Hsdpfsixxwmox Ahuonl 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system POS. 6 Glazing bead recovery group Includes: PRL enables automatic transition from profiling to glazing bead recovery and vice versa - Working unit with spindle diameter 30 mm, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Modified tandem outfeed

Stanje: rabljeno, Delovna dolžina 3600 mm Delovna širina 1500 mm Delovna višina cca 900 mm WEINIG povratni sistem RF15 ----- Uporabno za skobeljnike, rezkalne in profilirne stroje z maks. podajalno hitrostjo cca 22 m/min. Tehnični opis: Dolžina obdelovanca: 250 - 3.600 mm Širina obdelovanca: 30-230 mm Vzdolžno-prečno-vzdolžni transporter z 2 integriranima, pogonjenima valjčnima progama: Prečna transportna pot 1.500 mm Hsdexpn Tnspfx Ahusnl Konstantna transportna hitrost: 30 m/min Dolžina valjčne proge: 2.200 mm Povratna valjčna proga (nepogonska) do operaterja (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: dober (rabljeno), Leto izdelave: 2011, Armoured roller CBM 240 / ST 120 Hsdpfx Ahewvhrteuenl MACH-ID 923 Type: CBM 240 / ST 120 Year of manufacture: 2011

Stanje: rabljeno, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Hjdpfx Aev D Rg Dohuonl Manufacturer’s Description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...