Stroji za izdelavo oken nakup rabljenega (275)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Oberkochen
470 km
Avtomatski stroj za vrezovanje
WEINIGUnivar 10/3
Klic
Stanje: rabljeno, Number of spindles: 4 pcs
Number of tool sets: 11 pcs
Spindle diameter: 50,40 mm
Spindle length: 285,125 mm
Length: 4000 mm
Width: 2000 mm
Height: 2200 mm
Weinig Univar 10/3 Profile Reworking Machine
-----
For re-profiling of windows, doors, and similar items featuring asymmetrical perimeter profiles. Suitable for timber thicknesses from 68 to 92 mm.
Processing time per frame re-profiling for a medium size (1.20 x 1.20 m) – approx. 2 min.
Available tool positions can be selected via the operator control panel.
The machine is equipped with three hydraulically controlled right-side precision lifting spindles, designed to accommodate three tool sets, each spindle providing 2 x 95 mm vertical spindle stroke. The spindle stroke is performed in a U-motion, enabling minimal opening in the milling fence when processing short parts. Spindle stroke can be finely adjusted horizontally for both tool positions from the operator side. Centralized lubrication for spindle units.
For tear-free re-profiling of window sashes or frames and doors, the first spindle can be selected for clockwise or counterclockwise rotation.
At each of the last 100 mm at the end of a frame, this spindle with the corresponding climb-cutting tool plunges into the passing timber. This prevents tear-out caused by the following counter-rotating milling spindle. The first seven transport rollers can be lifted via foot pedal, shortening the throughput time. An additional support rail permits re-profiling of large-format frames as well.
Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height is electronically measured and displayed.
Electrical design according to VDE standards.
Machine is supplied with operation tools, but without machining tools.
Technical data:
Working width min. 40 mm
Working height min. 30 mm, max. 100 mm
1st Profile Spindle (climb and counter-rotation)
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
With automatic climb-cutting plunge mechanism
2nd Profile Spindle
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
3rd Profile Spindle
-----
Spindle motor power: 11.0 kW
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Clamping length: 285 mm
Tool base circle: 112 - 140 mm
Max. tool diameter: 232 mm
Vertical spindle stroke: 2 x 95 mm for 3 tools
Cedpfxovnv Uuo Afqsrk
Home position below table: 10 mm (adjustable up to 20 mm)
Horizontal spindle stroke: 80 mm
4th Profile Spindle – Fitting (hardware) unit, right
-----
For machining the hardware groove during the re-profiling pass or for grooving along the longitudinal profile.
Pneumatic horizontal movement with selector switch at the operator control panel.
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm
Clamping height: 125 mm (for 2 tools)
Tool cutting circle min. 140 mm, max. 180 mm
Feed motor power: 1.1 kW
Feed speed...
mali oglas
Geretsried
330 km
Rezkar za les-alu okna
ZUANI
Klic
Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, ZUANI rezkar za leseno-aluminijasta okna
Cedpfx Afexlk Nksqerk
Če potrebujete številke proizvajalcev rezkarjev, prosim pošljite e-pošto!
mali oglas
Nemčija
894 km
Dvojni brusilni stroj z dvojnim diskom - vertikalni.
DISKUSDDW900R
Klic
Leto izdelave: 2007, Stanje: rabljeno, Control system: Siemens 840D
Grinding wheel diameter: 900 mm
Workpiece - grinding width: 144 - 152 mm
Workpiece - grinding dimension: 22 - 25 mm
Speed at 24 m/s: 1,425 rpm
Maximum circumferential speed: 25 m/sec
Power output: 37 kW
Total power requirement: 75 kW
Weight: approx. 18.0 t
Space requirement: approx. L 4.9 x W 4.9 x H 2.6 m
In our opinion, the machine is in good used condition.
Double-sided surface grinding machine
The machine was used for the production of connecting rods.
Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if stated in the additional information.
Technical data and information subject to change and error. Prior sale reserved!
Crodpfx Ajxq Hkujfqek

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Oberkochen
470 km
Brusilni stroj
HESSGloria
Klic
Stanje: rabljeno, Number of sanding units: 2 pcs
Sanding width: 190 mm
Maximum sanding height: 4–180 mm
HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE
-----
Manufacturer’s Description:
-----
Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification.
Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload.
Technical Specifications:
-----
Sanding belt speed: 24 m/sec
Crodpfsv D Rg Dox Afqsk
Sanding width: 190 mm
Sanding thickness: 4–180 mm
Minimum workpiece length: 300 mm
Feed speed: Infinitely variable 5–25 m/min
Sanding belt dimensions: 200 mm wide x 1600 mm long
Electrical connection: 400 V, 3/N PE, 50 Hz
Sanding units: 2 x 4 kW
Feed motor: 0.75 kW
Height adjustment: 0.18 kW
Pneumatic connection: R 3/8", 80 NL, 8 bar
Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec
Extraction connection sockets: 2 x 160 mm diameter, top of machine housing
External dimensions: Length: 1600 mm
...
mali oglas
Oberkochen
470 km
Brusilni stroj
HESSExpert
Klic
Stanje: rabljeno, Number of sanding units: 4 pcs
Sanding width: 190 mm
Max. sanding height: 4–180 mm
Weight: 4200 kg
Hess Expert 4-Belt Single-Piece Wood Sander
Ø Sanding from below and above
Ø Each with 2 staggered sanding units (top and bottom)
Ø Sanding units (top and bottom) connected in series according to the precision planing principle
Ø Pre-sanding with coarse grit (calibration)
Ø Fine sanding with fine grit (finish)
Ø Central motorized height adjustment of the lower sanding units
Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units
Ø Oscillating belt use (during the sanding process)
Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums
Ø Oxide-ceramic sanding shoe for
- precise surface geometry
- no readjustment required
- permanent dimensional accuracy
- completely maintenance- and wear-free
Basic structure:
Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping.
Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units.
Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine.
Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment.
Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt.
Wood guiding at the infeed area for hard, double-sided...
Crjdet Tqy Eopfx Afqsk
Odkrijte več rabljenih strojev
mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 6 NC-Spindeln
Klic
Stanje: rabljeno, Keyway Spindle 1 pc.
Number of Milling Units: 5 pcs.
Spindle Diameter: 50 mm
Control System: Weinig, PC-Nexus
#2774 Weinig Unicontrol 6 with NC Spindles
Machine is cleaned and fully inspected prior to delivery
Technical Data Summary
(Please enquire about any additional included accessories)
Pos. 1: Cross-Cut Saw
-----
> Number of Tools: 1 pc.
> Spindle Speed: 2,800 rpm
> Spindle Diameter: 40 mm
> Max. Tool Diameter: 400 mm
> Motor Power: 3 kW
> Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding
> Laser Guidance for cutting section detection
Pos. 2: Rounding Unit, Horizontal Lower
-----
> Position: horizontal, lower
> Motor Power: 1.5 kW
> Spindle Diameter: 20 mm
> Clamping Length: 25 mm
> Spindle Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment mechanically linked with cross-cut saw
> Radial Adjustment pneumatically controlled, on/off
NC-Controlled Length Stop
-----
> Length: 3,500 mm
> Electronic length stop
Pos. 3: Tenoning and Keyway Spindle
-----
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 3,500 rpm
> Max. Cutting Circle: 320 mm
> Spindle Diameter: 50 mm
> Max. Tool Diameter: 320 mm
> Motor Power: 11 kW
Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling)
-----
> Position: vertical, right
Crodpfxjvu Hgho Afqsk
> Number of Tools: 1 pc.
> Tool Clamping Length: 120 mm
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 7.5 kW
Pos. 5: 2nd Profiling Spindle
-----
> Position: vertical, right
> Number of Tools: variable, stepless adjustment, NC controlled
> Tool Clamping Length: 320 mm
> Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled
> Spindle Speed: 6,000 rpm
> Spindle Diameter: 50 mm
> Max. Cutting Circle: 232 mm
> Motor Power: 11 kW
2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash Bar Guide consisting of:
Guide rail at the stop (climb milling section),
Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle.
Pos. 6: Profiling Milling Unit, Horizontal Upper
-----
> Clamping Length: 40 mm
> Spindle Diameter: 40 mm
> Motor Power: 3.0 kW
> Speed: 9,000 rpm
> Max. Cutting Circle: 130 mm
> Axial Adjustment: 30 mm, 8 positions
> Radial Adjustment: 125 mm, 8 positions
Pos. 7: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical, right
> Tool Clamping Length: 160 mm
> Axial Adjustment: 115 mm, 8 positions
> Radial Adjustment: 110 mm, 8-position turret
> Spindle Speed: 5,850 rpm
> Spindle Diameter: 40 mm
> Max. Cutting Circle: 210 mm
> Motor Power: 3.0 kW
Pos. 8: Profile Milling/Grooving Unit, Bottom
-----
> Motor Power: 3.0 kW
> Tool Clamping Length: 125 mm
> ...
mali oglas
Oberkochen
470 km
Stroj za vrtanje vogalnih ležajev in oljk
HESSBohrstation
Klic
Stanje: rabljeno, Number of drilling motors: 1 unit
Crodpfevu Hgzjx Afqek
Corner fitting drilling: 1=yes, 0=no 1 yes
Olive drilling: 1=yes, 0=no 1 yes
1 HESS Fitting Drilling Station for Corner Fittings and Olives
This HESS drilling station offers extensive drilling technology at a low price for craftsmen. A complete station for drilling both corner fittings and olives, equipped with all essential features, including:
- 2 clamping cylinders
- Drilling depth sensing
- Effective extraction system
- Stop systems for corner fitting and olive drilling
- Drill head with quick-change chuck
- Adjustable drill feed speed
- Automatic program sequence
This means technology for perfect work: only one machine with a single drilling unit and one drill head for two operations.
System Description:
- Base frame as panel for frame and sash up to 100 mm
- Drilling unit centrally positioned, height-adjustable manually via threaded spindle
- Drill hole position and depth preset for the specific fitting type, adjustable via stop system when changing types
- Drill feed speed steplessly adjustable via throttle valve
- Direct extraction
- Electropneumatic control system with automatic program sequence for:
- Clamping the workpiece
- Start drilling motor
- Move drilling aggregate forward
- Drilling
- Return drilling aggregate
- Stop drilling motor
- Release workpiece clamping
- Fixed stop systems
Standard Equipment / Technical Data:
- Sturdy base frame as panel, precise support made of wear-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick
- Corner fitting and olive drilling possible with one machine and one drilling unit
- Simple and convenient vertical operation, easy handling, no templates needed
- Minimal setup time for secure workpiece positioning
- Guaranteed precise and accurate boreholes
- 2 clamping cylinders for secure fixation of sash or frame, adjustable for different wood thicknesses
- Lateral rebate stop for corner fittings
- Ergonomically arranged stop system for olive drilling, with 14 swiveling stops and additional color coding
- Fixed stop system for hole height adjustment when switching from corner fitting to olive
- Automatic drilling depth sensing for both corner fitting and olive
- Drilling unit with quick-change chuck for different tools (corner fitting and olive). Tool change in no time
- Automatic program sequence
- Clean operation due to effective extraction
- Space saving and mobile thanks to steering/brake castors
Electrical equipment according to VDE regulations.
Electrical connection: 0.55 kW, 400 V, 50 Hz
Pneumatic connection: R 3/8", 4-8 bar
Extraction port: 1 x 100 mm diameter
Extraction speed: 25 m/sec
Required space:
Width: 2600 mm
Height: 1250 mm
Depth: 800 mm
Support height: 300 mm
Paint finish:
RAL 7030 stone grey with
RAL 1018 zinc yellow
1 drill set with 1 x 25 mm drill and 2 x 10 mm drills
additional 1 x 34 mm diameter drill
(Technical data according to manufacturer's information – subject to change without notice!)
mali oglas
Oberkochen
470 km
Žaga za steklarske kroglice
HECHTES 350
Klic
Stanje: rabljeno, Leto izdelave: 2018, Število motorjev: 1 kos
Delovna dolžina: 2500 mm
Krmiljenje: ne
Enostranska žaga za zasteklitvene letve Hecht ES 350
-----
Zasuk pnevmatsko proti fiksnim omejevalcem.
45º/90º/135º
s pnevmatskim pomikom žaginega lista
pnevmatsko nihanje preko ročnega omejevalca
z nogo stroja, pnevmatska pritrditev
Žagin list HM 350 x 3,0/2,2/30 Z 100
Mere stojala za žago: dolžina 700 mm, globina 1.600 mm, višina 1.500 mm
Dotikalni omejevalec 1,5 m
Oporna površina 1,5 m z nosilcem
Dotikalni omejevalec 3 m
Podaljšek oporne površine z 1,5 m na 3 m z nosilcem
Cedpfxjvpr N Re Afqjrk
Vložki v mizo z utori za prekrivne zasteklitvene letve
HECHT ASB ročni dolžinski omejevalec z digitalnim prikazovalnikom, 2500 mm
Z odsesovalno napravo
(Tehnični podatki po navedbah proizvajalca – brez jamstva!)
mali oglas
Oberkochen
470 km
Stroj za čepljenje in zarezovanje
HABERKORNFZS-2
Klic
Stanje: rabljeno, Crosscut Saw 3 kW
Spindle Diameter: 50 mm
Spindle Length: 300 mm
Number of Tool Sets: Variable
Control: CNC
Dimensions (L x W x H): 2500 x 1700 x 2100 mm
Weight: 1700 kg
HABERKORN - Groove Cutting Machine FZS-2 Electronic with Continuously Adjustable Grooving Spindles and Automatic Roller Table
-----
Crosscut Saw
-----
Spindle Arrangement: Top
Three-Phase Motor: 3 kW
Spindle Diameter: 30 mm
Speed: 2800 rpm
Saw Blade Diameter: 400 mm
* Automatic brake with speed monitoring
* Infinitely variable saw positioning with Siko display
* Safety and extraction hood with 100 mm extraction port
2 Grooving Spindles, 50 mm Diameter
-----
Power: 2 x 7.5 kW
Speed: 4200 rpm
Spindle Diameter: 50 mm
Tool Diameter: approx. 360 mm
Usable Length: 300 mm
* Both grooving spindles positionable via ball screw
* Fully programmable, 19 programs, display with function keys
* Safety and extraction hood with 180 mm extraction port
* Automatic brake with speed monitoring
Swing Table
-----
* Swivel range: +/- 65°
* Automatically changing backstop (programmable)
* Pneumatic clamp
* High-precision electronic angle display
* Automatic length compensation
* Backstop positioned in the cutting plane at every angle setting
Special Equipment
-----
Continuously variable roller table feed
Laser for workpiece positioning
Manual length stop LA 2000
Length: 2500 mm
Extraction Port Diameter:
2 x 180 mm for grooving spindles
1 x 100 mm for crosscut saw
-----
Price of the above-mentioned machine on request!
-----
Codpfxowgwlke Afqerk
Images show an identical model. Original photos currently unavailable.
(Technical data according to manufacturer – subject to change!)
All prices stated are net. VAT to be added as per statutory rate.
mali oglas
Oberkochen
470 km
Stroj za vrtanje in vstavljanje čepov
GÖTZINGER2 Stk. Bohr-Fraeszentrum
Klic
Stanje: rabljeno, Leto izdelave: 2013, Premer izvrtine, mm
Število vodoravnih vrtalnih glav, kos
Število navpičnih vrtalnih glav, kos
2 kosa Götzinger vrtalno-rezalnega centra
-----
Prodaja po naročilu stranke!
2 enaki stroji:
En stroj uporabljen za "leve" dele, drugi za "desne" dele.
Stroje je možno uporabljati tudi posamezno.
Stroje je upravljala programska oprema za izdelavo oken, lahko pa jih upravljate tudi preko
lastne programske opreme stroja.
Oba stroja imata enako opremo:
- Vrtalni agregat levo in desno za čelne izvrtine.
- 3 agregate za vrtanje in rezkanje vzdolžnih obdelav.
- Obdelovanci se vložijo le enkrat, nosilec agregata izvede različne operacije.
Namestitvena dolžina posameznega stroja cca 6 m.
Možna posamezna prodaja:
Cena na stroj: 10.000 EUR
Več informacij v priloženih PDF-jih.
Cjdpfov N N Spex Afqsrk
mali oglas
Oberkochen
470 km
Stiskanje okvirja
S&SBavaria 2000 L - Video
Klic
Stanje: novo, Working width: 4500 mm
Working height: 3000 mm
Number of press cylinders: 6 pcs.
Dimensions (LxWxH): 5500 x 1400 x 3550 mm
Weight: 3000 kg
S&S Frame Press Bavaria 2000 L
-----
With automatic pressing cycle and manual operation
for corner joints with tenons & mortises and dowel connections / mortised tenons,
switchable via selector switch on the control cabinet.
Basic equipment allows optional use of counter profiles, if the sash is folded on the loose part.
CE-compliant version
Base machine in extra-strong, welded frame construction,
with thick-walled special hollow profiles.
Guideways for pressure beams at the press corners are made with wear-resistant machining.
Fast, smooth manual width adjustment
via ball-bearing carriage, fixation in 50 mm hole grid,
optionally motorized width adjustment with hydraulic clamping (at extra cost).
Height adjustment and pressing performed in a single cycle by long-stroke cylinders.
Right-side press corners with integrated horizontal cylinders—no vertical positioning of horizontal press cylinders necessary, which eliminates cylinder collisions.
Lower counter-bearings adjustable in several positions for the optimal insertion height.
3 kW compact hydraulic system with integrated control block,
variable pressure control from 20 - 120 bar, manometer included.
Operation via tactile switches with separate control circuits
for the vertical and horizontal press cylinders, mounted on a freely movable control panel.
2 double-acting vertical press cylinders, stroke matched to working height,
Cedpswg Hr Tsfx Afqsrk
piston diameter 60 mm, max. pressure per cylinder 2100 kg
2 double-acting horizontal press cylinders, 80 mm stroke, piston diameter 40 mm,
max. pressure per cylinder 1250 kg
Counter bearing and pressure plate depth: 100 mm
Control cabinet at the left machine base, 400V, 50Hz
Machine supplied with ready-to-connect 16A plug
Paint finish: RAL 7035 light gray with RAL 7016 anthracite gray
Working size: Length x Height = 4,500 mm x 2,750 mm
Note:
Actual working size: 4,500 x 3,000 mm (L x H)
Space requirement: 5,500 mm x 1,400 mm x 3,550 mm (L x W x H)
Item
Medium pressure beam complete with pressure cylinder, hose and shut-off valve, up to 2,750 mm height
Note: actual working height: 3,000 mm
Item
Individual pressure control for medium pressure beam,
pressure range up to max. 100 bar
(for pressing Georgian bar windows)
Item
Continuously height-adjustable cross pressure device,
complete with pressure cylinder and counter-bearing, throttle and shut-off valve
Item
Individual pressure control for cross pressure device
pressure control range up to max. 100 bar
(for pressing Georgian bar windows)
Item
Shut-off valve at 3rd vertical cylinder
Item
Shut-off valve at upper horizontal cylinder
Item
x Angled window control for vertical cylinder
Item
x Swivelling pressure plates, attachable for pressing up to 60 degrees
Item
Double swivelling pressure plate for pointed windows (triangle)
Item
x Extension for swivelling pressure plate
mali oglas
Oberkochen
470 km
Okenski sistem
WEINIGUnicontrol 6 NC Spindeln
Klic
Stanje: rabljeno, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
# 2764 Weinig Unicontrol 6 with NC spindles
-----
Machine will be cleaned and thoroughly inspected before delivery
Technical Data Summary
(For any additionally included accessories, please inquire)
Pos. 1: Cross-cut saw
-----
> Cross-cut saw, electronic, horizontally infinitely adjustable
> Number of tools: 1 pc.
Crjdpfxsvu Hfqe Afqsk
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Maximum tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser line for identifying the saw cut
> NC length stop, mounted on slotted table included
Positioning of the cross-cut saw integrated into control system.
> Length: 3500 mm
Pos. 2: Tenon and slot spindle
-----
> Number of tools: variable, infinitely adjustable NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis
> Spindle speed: 3500 rpm
> Spindle diameter: 50 mm
> Maximum tool diameter: 320 mm
> Motor power: 11 kW
Pos. 3: 1st profiling spindle (climb-cut and counter-rotation)
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Max. tool swing: 232 mm
> Motor power: 7.5 kW
Pos. 4: 2nd profiling spindle
-----
> Position: vertical right
> Number of tools: variable, infinitely adjustable NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis
> Spindle speed: 6000 rpm
> Spindle diameter: 50 mm
> Max. tool swing: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash guide consisting of:
Guide rail in the stop (area of climb-cut spindle),
Sash support bar from above in the area of vertical right profile milling unit and profiling spindle.
Pos. 5: Profile milling unit horizontal, top
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 5,850 rpm
> Max. tool swing: 130 mm
> Axial adjustment 30 mm, 8 positions via pneumatic turret
> Radial adjustment 125 mm, 8 positions via pneumatic turret
Pos. 6: 3rd profiling spindle (hardware spindle)
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment 115 mm, 8 positions via pneumatic turret
> Radial adjustment 100 mm, 8 positions via pneumatic turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool swing: 210 mm
> Motor power: 3.0 kW
Additional features
-----
> Network-capable
> Rebate unit for tear-free rebating
> Double-part package
> Return conveyor for one-man operation: pivoting belt
> Screen control
> Tilt window device
> Electronic angle display for tilt windows
> Industrial PC, PC control/NEXUS
> Weinig type production program
> Without machining tools
No original pictures available yet.
Photos show an identical machine from our archive.
-----
Price for the above machine on request!
-----
Optional at extra cost: EUR 6,500.00
Note...
mali oglas
Aalen
471 km
Stroj za vrtanje in vstavljanje čepov
GÖTZINGERBLE - Video -
Klic
Stanje: novo, Bore diameter variable, mm
Number of horizontal boring heads: 1 pc.
Number of vertical boring heads: 0 pcs.
1 Götzinger Dowel Gluing and Insertion Machine BLE
The BLE is used to apply glue and insert dowels into the end faces of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode.
Basic Frame: compact design, covered with sheet metal
Table size approx. 800 x 200 mm
Pos. 1
-----
1 Glue station
Full-jet valve
Precisely adjustable glue quantity
Glue gun for opposing hole application
Pos. 2
-----
1 Stainless steel glue pump, high-pressure pump and glue hose
Pos. 3
-----
1 Insertion station with dowel singling device and insertion cylinder
Pos. 4
-----
1 Vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit
Pos. 5
-----
1 Processing unit with cross table, linear guide, and 3 NC-axis motors
X = 200 mm processing width
Y = 120 mm processing height
Z = 50 mm insertion depth
Pos. 6
-----
1 Positioning control
10" color touch panel
Up to 500 drilling patterns can be created and stored,
which can be easily recalled as needed (1 drilling pattern can have up to 16 dowel positions)
Software prepared for ONLINE connectivity
For online control, the data must be prepared in the appropriate software format for the controller – our machine can receive and process these data.
-----
Total price for version with Pos. 1 to Pos. 6: on request!
Csdpfou Uu Uzsx Afqerk
Optional equipment and surcharges:
-----
Pos. 7
-----
1 horizontal drilling unit, 1,000 W drilling motor
Speed 4,000 – 8,000 rpm, collet chuck mounting
Drill feed: pneumatic
Surcharge: EUR 4,305.00
Additional accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or top rail gluing, available on request!
Prices are net plus statutory VAT, excluding packaging/shipping and commissioning.
(Technical data according to manufacturer – subject to change and without guarantee!)
mali oglas
Aalen
471 km
Okvir pritisnite
S&SRP 2000
Klic
Stanje: novo, Working width: 3,500 mm
Working height: 2,300 mm
Number of pressure cylinders: 4 pcs.
S&S Frame Press Type RP 2000 – CE version
Options:
Working widths from 3,000 mm to 5,000 mm
Working heights from 2,000 mm to 3,000 mm
Optional equipment includes central pressure beam, angled window device, counter profiles for single-part production, and much more!
Request our complete price list!
Description:
Robust frame welded construction made of thick-walled special profiles, sliding carriages, and pressure beams with 50 mm hole pitch.
Continuous left-side abutment for width pressing, lower abutment on two levels.
Vertical pressure cylinders on special pressure beams with single-hand quick adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure sustained absorption of high pressing forces.
Quick and smooth width adjustment via ball-bearing guide carriage with central locking, fixing in 50 mm increments.
Upper horizontal pressure cylinder infinitely height-adjustable and equipped with weight compensation.
Lower horizontal pressure cylinder with centering bores for both abutment levels, no weight compensation.
Abutment and pressure plate depth 100 mm.
Pressure plate and support width 130 mm.
Machine controlled electro-hydraulically, with 2 vertical pressure cylinders, Ø 50 mm, stroke 120 mm, single-acting, with weight compensation and single-hand quick adjustment;
2 horizontal pressure cylinders, Ø 40 mm, stroke 120 mm, double-acting with weight compensation;
2 manual control valves, manometer, 1 pressure control valve from 20 to 100 bar
corresponding to 400 to 2,000 kg pressing force vertically;
powered by 3 kW three-phase motor for 400 V, 50 Hz operating voltage.
Complete with electrical connection.
Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey.
Csdpfjd Ih H Sox Afqsrk
(Technical data according to manufacturer without guarantee, images may show optional equipment!)
mali oglas
Aalen
471 km
Naprave za čiščenje orodja
EMSAQuicksonic QS 520
Klic
Stanje: rabljeno, max. tool diameter, mm
Max. tool height, mm
Operating pressure, bar
Filling volume: 52 l
Quicksonic QS 520
Ultrasonic cleaning unit with lid and work basket
-----
Technical manufacturer description:
External dimensions (length x width x height): 560 x 460 x 510 mm
Usable dimensions (length x width x height): 500 x 400 x 260 mm
Basket usable dimensions (length x width x height): 444 x 364 x 224 mm
Capacity: approx. 52 l
Crodsumng Aepfx Afqek
Ultrasonic Power
Effective nominal power: 800 Watt
Peak power: 1600 Watt
Operating frequency: 40 or 25 kHz
Supply voltage: L+N+PE, 230 V/50-60 Hz
Heating power: 2000 Watt
Heating control: 30 - 85°C
Timer: 0-15 min & continuous operation
-----
All prices ex works plus packaging, transport, insurance as well as statutory VAT.
(Technical data as per manufacturer – subject to change and errors excepted!)
mali oglas
Aalen
471 km
Brusilni stroj
LoewerDSM 2004
Klic
Stanje: novo, Number of sanding units: 4 units
Sanding width: 190 mm
Max. sanding height: 180 mm
LÖWER DoubleSander Solid DSM 2004
-----
Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates.
- Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below:
1. Belt sanding unit with heavy steel roller
2. Belt sanding unit with rubber-coated roller and pad
3. Finishing unit with fibre brush
- Direct-drive sanding rollers for slip-free power transmission
- Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy
- External cooling of sanding zones for cooler sanding and longer sanding belt life
- Forced, pneumatically controlled sanding belt oscillation
- Efficient sanding dust extraction directly at the sanding rollers
- Fine dust extraction at the tension rollers
- Integrated brushing and finishing device with large sanding dust extraction
- Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection
- Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm)
- Sanding belt tensioning via pneumatic cylinders with constant tension
Codpsvnv Tqsfx Afqsrk
- Rapid sanding belt change with pneumatic belt relaxation in seconds
- Adjustable belt tracking during belt change
- Electro-pneumatic compressed air monitoring
- Infeed protection via contact roller for oversized workpieces
- Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for smooth, even workpiece feed
- Feed gearbox motor with stepless speed control, 4-20 m/min
- All motors electrically fused
- Ergonomically arranged control elements
- Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system
Technical Data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2-180 mm
- Four brake motors for drive: 5.5 kW
- Feed motor: 1.5 kW
- Feed speed: 4-20 m/min
- Automatic height adjustment: 0.37 kW
- Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW
- Extraction nozzles: 2 x 180 mm, 2 x 120 mm
- Extraction airspeed: 20 m/s
- Pneumatic connection: 6 bar
- Working height: 870 mm
- Length (with soft disc 2740 mm): 2600 mm
- Length with control panel (with soft disc 3035 mm): 2985 mm
- Width: 880 mm
- Height: 1910 mm
- Approx. weight: 3300 kg
- Operating voltage: 400 V, 50 Hz, 3 phase
- CE version
-----
Price for the above-mentioned machine available upon request!
-----
Optional accessories at extra cost:
Workpiece air-blow cleaning
- Arranged with nozzles above and below at the machine outfeed, pneumatically controlled
Sanding belt air-blow cleaning (4-belt)
- Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...
mali oglas
Aalen
471 km
Okvir pritisnite
S&ST 35
Klic
Stanje: novo, Working width: 3,500 mm
Working height: 2,300 mm
Number of pressing cylinders: 4 pcs.
S&S Frame Press Type T 35 – CE Version
-----
Options:
Working widths from 3,000 mm to 5,000 mm
Working heights from 2,000 mm to 3,000 mm
Optional equipment: center pressure beam, tilting window device, counter profiles for individual part production, and much more!
Request the complete price list from us!
Description:
Robust frame welded construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid.
Continuous left-side support for wide-veneer pressing; lower support on two levels.
Vertical pressing cylinders mounted on special pressure beams with single-hand rapid adjustment and weight balance, height adjustable in 50 mm hole increments. Long sliding carriages ensure sustained absorption of high pressing forces.
Fast, smooth width adjustment via ball-bearing carriages with central locking, fixation in the 50 mm hole grid.
Upper horizontal pressing cylinder continuously height adjustable and equipped with weight balance.
Lower horizontal pressing cylinder with centering holes for both support levels, without weight balance.
Support and pressure plate depth: 100 mm
Pressure plate and support width: 130 mm
Electro-hydraulic machine control, with 2 vertical pressing cylinders d = 60 mm, stroke 120 mm, double-acting, with weight balance and single-hand rapid adjustment; 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm, double-acting, with weight balance; 2 manual control valves, manometer, 1 pressure regulating valve from 20 to 130 bar equating to 550 to 3,500 kg vertical pressing force. With 3 kW three-phase motor for 400 V, 50 Hz operating voltage.
Crjdpfod Ih H Nox Afqok
Complete with electrical connection.
Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey.
(Technical data according to manufacturer, subject to change. Image may show optional equipment!)
mali oglas
Aalen
471 km
Okvir pritisnite
S&SSuper-Video
Klic
Stanje: novo, Working width 3500 mm
Working height 2300 mm
Number of pressing cylinders: 4 pcs.
S&S electrohydraulic frame press machine, Type Super
Options:
Working widths from 3,000 mm to 5,000 mm
Working heights from 2,000 mm to 3,000 mm
Optional equipment with center pressure beam, slanted window device,
counter profiles for single-part production, and much more!
Request the complete price list from us!
Description:
With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version
The only self-adjusting high-performance
fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary.
Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design.
Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame.
Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy.
Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking:
Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic).
2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg.
2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg.
Press corners at upper right, in heavy, milled design, with automatic corner adjustment.
Removable press corners
Contact surfaces with adhesive-repellent finish.
Support and pressure plate depth 100 mm.
8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places.
Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps.
All individual frame components are placed directly in the pressing area.
Codpfx Aed Rzc Rsfqsrk
Program selection options:
- Manual motorized via push button
- Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier
Automatic, cycle-controlled pressing process via impulse:
Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing
Control cabinet is service-friendly, mounted on the left of the base frame.
Fast opto-electronic size setting.
Compact hydraulic unit adjustable from 20 to 100 bar.
Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.
mali oglas
Aalen
471 km
Brusilni stroj
LÖWERDSM 2000
Klic
Stanje: novo, Number of sanding units: 2 pcs
Sanding width: 190 mm
Maximum sanding height: 2–180 mm
LÖWER double-sided sanding machine DSM 2000
-----
Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal.
- Offset sanding and finishing units located above and below
- Direct drive, rubber-coated sanding rollers for slip-free power transmission
- Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area
- Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability
- External cooling of the sanding zones for cooler sanding and longer belt life
- Forced, pneumatically controlled sanding belt oscillation
- Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers
- Integrated brushing and finishing unit with large-capacity dust extraction
Crodovu Hdtspfx Afqsk
- Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection
- Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm)
- Sanding belt tensioning via pneumatic cylinder with constant tension pressure
- Sanding belt change with pneumatic belt release within seconds
- Adjustable belt tracking during belt change
- Electropneumatic compressed air monitoring
- Infeed safety device via contact roller in case of oversized workpieces
- Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment
- Cardan shaft drive for jerk-free and consistent workpiece transport
- Feed gear motor with three different feed speeds for quick adaptation to various wood types
- All motors electrically protected
- Ergonomically arranged controls on the workpiece infeed side
- Automatic workpiece thickness detection (no prior measurement necessary)
- Digital thickness display (resolution 0.1 mm) using modern magnetic tape system
Technical data:
- Sanding belt speed: 22 m/s
- Sanding belt length: 1800 mm
- Sanding belt width: 200 mm
- Working width: 190 mm
- Sanding thickness: 2–180 mm
- Two brake motors for drive: 5.5 kW
- Feed motor: 1.0 kW
- Feed speed: 6, 11, and 16 m/min
- Automatic height adjustment: 0.37 kW
- Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW
- Extraction ports: 2 x 120 mm and 2 x 150 mm
- Pneumatic connection: 6 bar
- Working height: 850 mm
- Length: 2105 mm
- Length with control panel: 2490 mm
- Width: 880 mm
- Height: 1910 mm
- Weight: approx. 1500 kg
- Operating voltage: 400 Volt, 50 Hz, 3P
- CE compliant
-----
Base price of the machine on request!
-----
Optional accessories for additional cost:
Infinitely variable feed 4–20 m/min for speed adjustment to ...
mali oglas
Aalen
471 km
Sistem za lakiranje oken
FINITUREPro Flow Impraegnieranlage
Klic
Stanje: rabljeno, Length 2700 mm
Width 1100 mm
Height 850 ± 150 mm
Motor power 0.37 kW
Electrical power 0.5 kW
Compressed air 6 bar
Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit.
-----
Functional features:
Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles.
The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption.
-----
Construction features:
Structure
Robust steel frame, coated with high-strength, water-soluble paint.
Machine body made of hot-sealed, thick polypropylene panels.
Four independent chambers for entry, flooding, air-blow, and exit.
Horizontal feed of workpieces
By means of motor-driven plastic rollers with grooves.
Electronic frequency inverter for controlling and varying feed speed.
Crsdpfx Aenl Nqqsfqok
Transmission
The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance.
Moving parts are protected by cover plates and appropriate seals.
Recirculation pump
Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF).
Air nozzles
A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece.
Electrical control panel
According to CE, protection class IP 55. Includes inverter for adjusting feed speed.
Technical data
Length mm 2700
Width mm 1100
Feed speed (min./max.) m/min 3-6
Drive group motor power kW 0.37
Installed electrical power kW 0.5
Distance between entry and exit rollers mm 2520
Working height (adjustable) mm 850 ± 150
Min. length of workpieces to be flooded mm 250
Max. width of workpieces to be flooded mm 300
Max. height of workpieces to be flooded mm 250
Compressed air consumption l/min 2000
Required compressed air pressure bar 6
Equipment and included accessories
Rinsing circuit for Pro Flow
-----
Price of the above machine: on request!
plus packaging and transport
-----
(Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))
mali oglas
Aalen
471 km
Stroj za vrtanje in vstavljanje čepov
GÖTZINGERPowerDrill Typ BF 315 -Video-
Klic
Stanje: novo, Bore diameter variable mm
Number of horizontal drilling heads: 3 pcs.
Number of vertical drilling heads: 4 pcs.
Weight: 1,500 kg
Dimensions (L x W x H): 4,800 x 1,600 x 2,400 mm
Width with table extension: 2,300 mm
Götzinger Power Drill Type BF 315
With the Götzinger PowerDrill, depending on the setup and configuration, you can:
- Drill for handle olives in the loose frame part or for finished sashes,
with multi-spindle drilling head, quick-changeable, also for routing of
lock case recesses for RC 2/security transmission
- Drill for corner bearings in the loose frame part, with multi-spindle drilling head,
quick-changeable, orientation by stop or measuring (tilt windows)
- Vertical drilling from above for hardware, pre-drilling for clip in the loose frame part
- Milling vertically from above for handles, profile cylinders, 3D hinge hardware
- Horizontal drilling with 2 drilling units, different drill diameters,
dowel drilling for end grain and longitudinal sides, setting blocks / transoms, mullions,
corner joints, front doors etc.
- Horizontal milling for lock case / hardware etc.
Machine Description
- Base frame in robust welded construction, linear guide for X-axis
- Table support 3,000 x 200 mm
- 6 pneumatic clamping cylinders with automatic retraction
- 2 side stops for end grain machining, manually retractable
- 2 longitudinal stops manually extendable/retractable
Travel Ranges:
- X-axis – 3,000 mm effective length
- Y-axis – 180 mm
- Z-axis – 105 mm
Units:
- 1 vertical drilling unit (Unit 1) from above, 1.1 kW drilling motor,
speed 1,500 - 12,000 rpm, 1 spindle, collet chuck ER 25
- 1 vertical drilling unit (Unit 2) from above, 1.1 kW drilling motor,
speed 3,000 rpm, with quick-change drilling head system
- 1 drilling head BKF 3, for olives, quick-changeable
- 1 drilling head BKF 3/2 for corner bearings, quick-changeable
- 1 vertical milling unit (Unit 3) from above, 2.0 kW milling motor,
1,500 - 16,000 rpm, collet chuck ER 25
- 2 horizontal drilling units (Units 4 and 5) 1.0 kW, 1,500 – 12,000 rpm,
collet chuck ER 20
- 1 horizontal milling unit (Unit 3) 2.0 kW, 1,500 – 16,000 rpm,
collet chuck ER 20
Control: electro-pneumatic with 3-axis control X, Y, Z
NC Position Controller by B + R, input via 10" TFT display
Machine complete with 1 set of drill tools
Ø 6, 8, 10, and 12 mm; 2 rough/finish cutters HM Ø 16 mm,
CE compliant, ready to connect
Extraction connection: 1 x Ø 120, 1 x Ø 80 mm
Power supply: 1 x 400 V, 16 Amps
Air supply: 1 x Ø 9 mm
OPTION:
Longitudinal stops right/left with NC axis high/low, programmable,
dimension input by rebate or light measurement possible
Dimensions:
L x W x H = 4.80 x 1.60 x 2.40 m – machine weight 1,500 kg
-----
Total price in the above configuration, ex-works: upon request
Crsdpfxjd Ih Hqj Afqsk
Plus delivery and installation/training
(Technical information according to manufacturer – without guarantee!)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Aalen
471 km
Center za armature
RUCHSERMontagelinie Video
Klic
Stanje: novo, Assembly line consisting of:
Pos. 1.0 /
RU-CBM 4000 Work Table
with a 500mm extended guide rail for the additional installation
of an aluminum bracket screwdriving machine for RU-CSA-SMB or RU-CSA-SMZD
with RU-SH special screwdriver, support table.
Length 4000 mm, width 1400 mm, tilt angle of the working platform
manually adjustable. Mounting bracket for fitting shears or fitting punch.
16 pivoting counter-holders for suspending sashes, fully pneumatically
foldable for unrestricted movement of the sashes on the table surface.
Device for detecting sash hardware length for constant and
variable/central gear placement for already drilled sashes, visual
size recognition of the fittings.
RU-SH, special screwdriver with pneumatic depth stop mounted on carriage,
safety control system, pneumatic height adjustment,
screw feeder device with automatic container shut-off
(manual feed for a second screw length at the special screwdriver upon request).
RA-8, turret stop for 8 screwing levels mounted on the carriage.
RA-4, turret stop for 4 different sash widths
mounted on the pivoting table.
Sash measurement detection pneumatically operated, detection range up to 2500mm with
simultaneous clamping of the measuring system.
PSF – Pneumatic clamping device for sashes.
Working height adjustable from 900 – 1000 mm.
Support table covered with felt. Guide rail extended to the left by 800 mm.
Pos. 1.1 / 5035-1
Pneumatic swing mechanism for the work surface with foot valve
Pos. 1.2 / 0500000
Bracket adapted for customer-provided punch/shears.
Cedpfxed Ih Hus Afqjrk
For mounting a customer-supplied fitting punch or
fitting shears (third-party make) on the sash assembly table.
Please specify manufacturer when ordering!!!
Pos. 1.3 / 5597-7
Travel device for RU-CBM on semi-circular guide rails.
The running rollers are mounted left and right on
the base frame of the table.
Pos. 1.4 / 6354-6
3 double-meter semi-circular guide rails, 30 x 10 mm.
Pos. 1.5 / 0730000
RU-SBL3000/40 hardware storage, free-standing,
Length 3100 mm, depth 1250 mm, height 2200 mm,
Support frame without front supports,
40 compartments, separated by dividing walls into 10 pieces per row,
and one continuous shelf above,
Compartment size: width 280 mm, height 150 mm.
Pos. 2
RU-CSA-SMB aluminum bracket screwdriving machine with automatic
screw feeding and manual feeding of the aluminum brackets from a
mobile box with pneumatic positioning system,
Screwdriver with depth stop with 4-position turret stop.
Pneumatic adjustment in the y-direction against two 6-position
turret stops. Feeder box for manual feeding of rotational or clip brackets
in square form 18.5 x 18.5 mm.
The bracket is manually pushed into a channel in the box and
positioned in front of the screwdriver tip by a pneumatically actuated slide.
Profile depth max. 150 mm, screw spacing in y-direction max. 120 mm.
Pos. 3
RU-S48-A6-350 column jib crane
for chain hoist, with 6 m aluminum jib arm
Version with base column, low-friction jib arm
and manual push trolley for slewing and trolley travel
by pulling and pushing on the load.
Jib reach 6 m
Structural height 4.461 m
Lower edge of jib arm 3.722 m (upper edge of jib arm 3.9 m)
Slewing range max. 270°
Steelwork painted in RAL 7035
The base plate is mounted to the hall floor supplied by the customer with
...
mali oglas
Aalen
471 km
Brusilni stroj
LoewerLeistomat SD Video
Klic
Stanje: novo, Number of sanding units: 8 pcs
Sanding width: 180 (260) mm
Maximum sanding height: 160 mm
Dimensions (L/W/H): 3065 x 1600 x 1900 mm
Machine weight: approx. 1500 kg
LÖWER-Leistomat SD
-----
Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment.
- 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm
- 1 upper Softdisc unit Ø=200 mm, 0.75 kW
- 1 upper lamella roller unit L=200 mm, 0.75 kW
- 1 lower Softdisc unit Ø=200 mm, 0.75 kW
- 1 lower lamella roller unit L=200 mm, 0.75 kW
- 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm
- Linear guidance of all sanding units on linear ball bearing sets with hardened shafts
- Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles.
- Motorized workpiece thickness adjustment
- Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers)
- Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding)
- Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min
- Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate
- Parameter storage as machine programs in program mode
- Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset)
- Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment
- Red/green signal lights indicate operational readiness
- Minimum workpiece length: 380 mm
- Conveyor belt width: 200 mm
- Maximum workpiece width: 180 mm (260 mm with return processing)
- Workpiece height: 12-160 mm
- Extraction connection: 4 x 100 mm and 2 x 80 mm diameter
- Sensor-controlled tool air blow-off directly at the discs
- Length (housing) x width x height (mm): 3065 x 1600 x 1900
- Total length: 4365 mm (including roller conveyor with integrated workpiece width detection)
- Weight: 1500 kg
- Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar
- CE-compliant version
-----
Price of the above-mentioned machine on request!
-----
Special accessories at extra charge:
Set of replacement lamella strips for Leistomat SD-200, comprising:
Surface units:
- 30 strips EH45 / 200 - 7 (rollers)
- 30 strips EH45 / 200 - 20 (rollers)
Rebate units:
- 96 strips M55 / 120 - 4
Crjdpfx Ajvnv Uhjfqjk
SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long
Set of replacement lamella strips for SmartFlex lamella disc, comprising:
- 60 strips M35 / 50 K 180-7 S
Sanding disc VB for Softdisc
- D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs.
Sanding disc VB for Softdisc
- D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs.
-----
...
mali oglas
Nemčija
650 km
Center za armature
EDER + MUELLERFluegelanschlagtisch
Klic
Stanje: rabljeno, Leto izdelave: 2018, Fitting support included
Working width: 3000 mm
Swivelling: no
Eder + Mueller sash mounting table
-----
Sale on behalf of customer, ex customer location.
Machine was in use until recently, now located at customer's warehouse.
Previous hardware: Maco Multi Matic (other hardware types possible)
Technical manufacturer’s description:
-----
Table height and working angle mechanically adjustable
with permanently mounted fitting support
Sash mounting table, length 3,000 mm, with fixed fitting support
Support surface with felt covering
12 swivelling counter holders for suspending the sashes
Hardware scanning for centred and constant gear position
1 shelf, 4-fold air connection
with automatic special screwdriver
with pneumatic depth stop
6-position turret stop for different screw depths
pneumatic height adjustment for 6 screw levels
automatic screw feed
manual insertion for second screw length
Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm
-----
Price for the above-mentioned machine on request!
-----
(technical data according to manufacturer – no guarantee!)
Codpfx Asxmamujfqjrk
All prices quoted are net, plus statutory VAT.
mali oglas
Nemčija
650 km
Žaga za steklarske kroglice
OMGATRF 527 NC CE
Klic
Stanje: rabljeno, Leto izdelave: 2017, Number of motors: 2 x 1.2 kW each
Working length: 2800 mm
Control system: yes
Crjdpfxoxmamns Afqek
OMGA Double Glazing Bead Saw Model TRF 527 NC CE
-----
For sale on behalf of a customer, ex-site.
The machine was in operation until recently, now located at the customer's warehouse.
Technical Manufacturer Description:
Double mitre saw for simultaneous cutting of two glazing beads.
The right saw unit is fixed, adjustment of the left unit is via positioning control.
Positioning control features:
- Monochrome graphic display 240 x 64 dpi
- Display of 30 characters on 8 lines
- Keyboard with 28 function keys
- FN key for function interruption
- Diagnostics and error messages
- Language selection: Italian, German, English, Spanish, French, and Slovene
- 10,000 memory lines dividable into 999 cycles, max. 99 lines per cycle
- RS 232 interface
- Manual input of dimensions or via USB interface
- 3 correction values each for left and right saw units
- 1 correction value for counter profiles
The adjustable unit is equipped with recirculating ball bushings and runs on hardened steel shafts. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed.
After completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate loading and unloading of the machine.
Machine equipment:
- Fixed right saw unit
- Swivelling clamping device
- Positioning control for TRF 527 NC CE
- Maintenance unit
- Central support
- Carbide-tipped saw blades Ø 220 mm
- Two-hand operation
- Intermediate support for simultaneous cutting of 2 glazing beads
- Pneumatic stroke of the saw units
- Motor protection switch
- Pressure monitor
- Undervoltage release
- Overload switch
- Tool kit
- 2 pcs. angle impact stops with 4 positions
Technical data:
- Motor power: 2 x 1.2 kW
- Saw blade diameter: 220 mm
- Max. cutting height without support: 80 mm
- Max. cutting width at 90°: 55 mm
- Max. cutting width at 45°: 40 mm
- Max. cutting length: 2800 mm
- Min. cutting length: 158 mm
- Weight: 217 kg
-----
Price of the above machine on request!
-----
(Technical data according to manufacturer – no liability)
All prices quoted are net plus statutory VAT.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni stroji za izdelavo oken (275)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Da Stroj
- Les Stroj Za Skobljanje
- Nit Stroj
- Nit Stroj Za Valjanje
- Stavostroj Vp 200
- Stojal Z Vrtljivo Roko
- Stojalo Za Sušenje
- Stojalo Za Vrtanje
- Stroehlein Instruments

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec


























































































































































