Traub Tnl 26 nakup rabljenega (104)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5318, izvrtina vretena: 26 mm, največja hitrost vretena: 4.750 obr/min, TECHNICAL DETAILS Max round diameter: 26 mm Max square dimension: 18 mm Max hexagon dimension: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots Fgedpfx Aaowtq Urs Hjk MACHINE DETAILS Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Multispindle & Bar Automatic Lathes TRAUB TD 26 Year: 1991 * Spindle motor power: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4750 rpm * Total power: 3.2 kW * Length (L – R): 1800 mm Fedpjwc Aqwefx Aa Hegk * Width (F – B): 1000 mm * Height: 1400 mm * Weight: 800 kg * Tool changer holder: 6 tools Additional Information * Max. round bar: 26 mm * Max. square bar: 18 mm * Max. hexagonal bar: 22 mm * Bar feeder included

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Fsdpfswuddvex Aa Hsgk Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits Fgodpfoxpgl Asx Aa Hok B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Premer palice (maks.): 26 mm, CNC stružniško obdelovalni center Traub tns26dgy. Izdelano v Nemčiji. CNC Mitsubishi tx8f Dva vretena, podajalnik za palice 4 metre. Dva revolverska nosilca z 12 orodji. Pogonsko orodje in os Y Sočasna obdelava na dveh vretenih. Vpenjalna velikost do 26 mm (collet clamp). Vrtljaji do 7000 obr/min. Moč glavnega vretena: 11 kW Moč proti vretena: 5,5 kW Maks. dolžina struženja: 270 mm Teža stroja 3,6 t; dimenzije brez podajalnika: 3,6*1,9*1,8 m Stroj je priključen v naših prostorih in je v delovanju, možen ogled. Za vse informacije in svetovanje glede naprave smo na voljo. Pomagamo pri zagonu in ostalih vprašanjih. Fedoxwyy Aepfx Aa Hsgk Na voljo je tudi Traub tns26d brez pogonskega orodja. Možnost dogovora o ceni.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm Fgsdpfx Ajuhawzea Hok FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: zelo dobro (rabljeno), Traub TNL12 CNC Swiss Zmogljivost: 12 mm Fsdjw R E Adjpfx Aa Hjgk Obratovalne ure: 25.596 h Sistem za gašenje požara Kraft & Bauer Papirni filter: Kompaktni tračni filter Konfigurirano kot na sliki (več fotografij sledi) V proizvodnji od leta 2009 (prvotno razstavni model) 12-ft podajalnik palic FMB Lovilec oljne megle Transporter za ostružke „Na voljo 2 stroja“

Leto izdelave: 2007, obratovalne ure: 24.593 h, Stanje: rabljeno, številka stroja/vozila: 5010481, Največji premer struženja: 340 mm, največja dolžina struženja: 750 mm, največja hitrost vretena: 4.000 vrt./min., transporter za ostružke, krmilni sistem TX 8I, 12-pozicijski revolver. Fgedpjx Akmqefx Aa Hsk

Stanje: dober (rabljeno), Leto izdelave: 2003, z gnanimi orodji, Y-os, C-os Krmiljenje TRAUB TX8 H Premer struženja - 275 mm Dolžina struženja - 450 mm Vrtlaji vretena 5600 o/min Delitev C-osi 0,001° Revolverska glava z 12 gnanimi pozicijami Fjdex A Evmspfx Aa Hsgk Podajalnik palic Naprava za izlov kosov Razna dodatna oprema MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Traub 700 734 VEMEM/I vmesna plošča, rabljena, v dobrem stanju, 100% delujoča, dobava skladno s fotografijami. Fgedox Eu Tvopfx Aa Hek

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Fgsdpsx A R U Ujfx Aa Hsk Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Leto izdelave: 2001, Stanje: dober (rabljeno), Bar diameter min. 18mm / max. 63mm Fodsi Dagcspfx Aa Hogk Bar length min. 1000mm / max. 4200mm

Stanje: dober (rabljeno), Leto izdelave: 1986, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8, število vreten: 1, STEUERUNG Fgodsxxqbyepfx Aa Hsk .. CNC upravljanje TRAUB TX 8 FUNKCIONALNOST .. Broj vretena: 1 .. Broj poprečnih klizača: 1 .. Broj revolvera: 1 .. Pogonjeni alati: da .. Broj c-osovina: 1 RADNI OPSEG - TOKARENJE - .. Maksimalni prečnik obrtaja: 450 mm .. Maksimalni prečnik tokarenja: 350 mm .. Maksimalni prečnik stezanja za rad sa šipkama: 60 mm .. Maksimalna dužina obratka: 490 mm GLAVNO VRETENO .. Opseg obrtaja do: 4000 /min .. c-osovina: da MAGACIN ALATA .. Broj pozicija alata: 12 ELEKTRIČNI PODACI .. Ukupna priključna snaga: 39 kW .. Priključni napon: 400 V .. Frekvencija mreže: 50 Hz DIMENZIJE / TEŽINA .. Potreban prostor -levo/desno-: 3150 mm .. Potreban prostor -napred/nazad-: 2100 mm .. Ukupna visina: 2100 mm .. Približna ukupna težina: 4000 kg DODATNA OPREMA ZA TOKARENJE .. Konjić: da - Mašina u dobrom stanju Oprema: - kompletan set nosača alata (veoma obiman) - uključujući pogonske držače alata - dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 978/9, stružna dolžina: 400 mm, potovalna razdalja osi X: 120 mm, pomik po osi Z: 300 mm, skupna višina: 2.100 mm, skupna dolžina: 3.500 mm, skupna širina: 2.000 mm, skupna masa: 3.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8 F, TRAUB TND 160 CNC stružnica - Obratovalna napetost: 380 V Fgedexx Ny Iepfx Aa Hek - Frekvenca: 50 Hz - Nazivni tok: 36 A - Priključek: 18,8 kW Stroj je opremljen s konjičkom, trijelčnim vpenjalom premera 140 mm, 8-pozicijskim revolverjem za orodja in transporterjem za odrezke. Gre za artikel iz učne delavnice. FCA D-73235 Weilheim Teck, naloženo na tovornjak.

Leto izdelave: 2005, Stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Fgedpohwnfkofx Aa Hjk Compatible with SAUTER tool turret with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Traub TFT monitor zaslon TX8D TX8F TX8H nadomestni monitor nadomestni zaslon Tip: TFT (1) Kat. št.: 222549 (2) Kat. št.: 10892558 Stanje: nov Traub TFT monitor/zaslon TX8D, TX8F, TX8H z okvirjem in kablom, 1 na 1 zamenljiv, 12" Plug and Play rešitev Fgedpfx Aaex Adb Io Hjk Ni originalni Traub del – 100% testirano, kompatibilno Izdelano pri cnc-markt GmbH

Stanje: rabljeno, Leto izdelave: 1993, Tehnične podrobnosti: Fsdpfx Aaou Idn Hs Hegk x-pomik: 400 mm y-pomik: 300 mm z-pomik: 400 mm Vrtljaji vretena: 8000 vrt/min Krmiljenje: Fanuc OM Vpenjalna miza: 500x300 mm Število mest v magazinu: 16 kosov Vpenjalo orodja: SK40 Razdalja delovno vreteno/vpenjalna površina maks.: 50-450 mm Število palet: 2 kosa Skupna potrebna moč: 10 kW Teža stroja pribl.: 2,5 t Mere stroja pribl. D x Š x V: 2,4x1,8x2,5 m Transportne mere stroja: 2,45x1,8x2,5 m - Električna omarica - Hladilna naprava - Transporter za ostružke proizvajalca META (transportna višina 1500 mm; širina 200 mm) Funkcija menjave mize ni v delovanju.

Stanje: zelo dobro (rabljeno), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR Including carrying case We are offering an original ATC measuring microscope that was originally removed from a TRAUB TNA turning center. The device is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Key features and benefits: • Universal application: Suitable for any CNC machine with a compatible tool holder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be detected and corrected immediately without removing the tool. • Precise referencing: Useful for checking reference points, bores, and fixtures directly inside the machine setup. Fjdpfox Dmr Esx Aa Hogk • Time savings: Makes external presetting devices unnecessary and reduces downtime. • Compact and robust design: Easy integration and operation within the tool changing system. This ATC measuring microscope transforms your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process safety.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Fsdex Ed A Depfx Aa Hogk Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% Fgedswpa Ruspfx Aa Hek - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Fodpfx Aasu Eug Is Hsgk Includes extensive accessories.

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree Fodpfowwl Iuox Aa Hegk --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Fedpew E Nnbefx Aa Hsgk Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: Fgjdpfx Aox Edz Tea Hsk 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema Fgodpox A Aw Isfx Aa Hek 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.