Arburg 270 M nakup rabljenega (326)

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Vbrizgalna enota Premer polža: 30 mm Prostornina hoda: 85 cm³ Vbrizgalni tlak: 2000 bar Dodatna oprema Rokovanje z napravo je vključeno. Ta stroj Arburg Allrounder 270 H 350-70 je bil izdelan leta 2013. Opremljen je s polžem premera 30 mm, z največjim vbrizgalnim tlakom 2000 barov ter z dvigom šobe 210 mm. S 20.000 delovnimi urami je ta hidravlični stroj za brizganje plastike dobavljen z integriranim sistemom za rokovanje. Izkoristite priložnost in kupite stroj Arburg Allrounder 270 H 350-70 za hidravlično vbrizgavanje plastike. Za več informacij nas kontaktirajte. Isdpfx Aoxxndfegpea Področja uporabe Brizganje plastike

Stanje: dober (rabljeno), Leto izdelave: 2000, Arburg 270 C 400-100 (2000) Zapiralna sila: 40 t Premer polža: 20 mm Razdalja med stebri: 270 x 269 mm Isdpfoxqfi Ajx Agpea Teža: 25 g Tip: horizontalen Pogon: hidravlični Ure: 138000 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 25 mm, razmak između stupova: 270 mm, delovna prostornina: 39 cm³, injekcijska masa: 36 g, minimalna višina orodja: 200 mm, moč: 10,2 kW (13,87 KM), Leto izdelave 2003 Zapiralna sila 25 ton Razdalja med stebri 270 x 270 mm Premer polža 25 mm Iedpfx Agoxgiaqopoa Volumen vbrizga 39 ccm Teža vbrizga 36 g za PS Oprema: transportni trak, manipulator, izvlekač jedra, Euromap Po popolnem pregledu!

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Clamping force: 250 kN, tie bar spacing: 270 mm/270 mm, platen dimensions X/Y: 380 mm/380 mm, screw diameter: 25 mm, injection volume: 49 cm³, shot weight (PS): 45 g, injection pressure: 2000 bar, cores: 2+5, heating zones: 12. Pump hours: 2,388 h, automatic operation: 1,600 h. Includes Multilift H with B-axis, cleanroom module. Isdpfotyax Ejx Agpja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 270 S 250-60 (2004) Zapiralna sila: 25 t Razdalja med veznimi palicami: 270 mm × 270 mm Iedpfoxl Tp Tex Agpsa Dimenzije plošč: 400 mm × 400 mm Maks. hod odpiranja orodja: 275 mm Min. višina orodja: 198 mm Maks. dnevna odprtina: 279 mm Hod izmetalca: 95 mm Sila odpiranja orodja (maks.): 14 kN Dimenzije stroja (Š × D): 1250 mm × 3800 mm Teža stroja: ca. 1900 kg Premer polža: 22 mm Prostornina hoda: 39 cm³ Tlak vbrizga: 1810 bar Količina vbrizga (2 črpalki): do 8,1 cm³/s Zmogljivost materiala (PS): do 22,0 kg/h Leto izdelave: 2004 Tip: hidravlični brizgalni stroj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Z-axis: servo-electric, transversely movable to the machine longitudinal axis, stroke: 1000 mm, maximum speed: 2 m/s, maximum handling weight: 5 kg (sum of gripper, parts, and G-axis), repeat accuracy: +/- 0.1 mm. C-axis: pneumatic rotary axis, rotation range: 0°/90°. B-axis: pneumatic, 90° swivel to reduce the stroke of the Z-axis. Z-axis stroke extension: up to 1000 mm (for version with B-axis). G-axis (gripper stroke): pneumatic drive, stroke length: 50 mm, end positions adjustable manually. Documentation available. Iodetlucnopfx Agpja

Stanje: dober (rabljeno), Leto izdelave: 2000, Vpenjalna sila: 40 t Premer vijaka: 25 mm Masa brizganja: 45 g Razdalja med vodili V: 270 mm Razdalja med vodili H: 270 mm Dimenzije plošč: 446 x 446 mm Volumen brizga: 49 cm3 Tip: Uni Iedpfxexdm Sxe Agpsa Pogon: Hidravlični

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Clamping force: 25 tons Tie bar spacing: 270 x 270 mm Max. opening: 275 mm Minimum mould height: 200 mm Platen size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm³ Ijdpfx Aovl Skgjgpja Shot weight: 17 g Injection pressure: 2500 bar Operating hours: 38,035 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Iedpfexz Anqjx Agpja Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Metering volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA – touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 interface Robot interface 2 x air valves 1 x hydraulic core pull Injection unit hardened – bimetallic Main drive motor – servo motor with inverter control – energy saving Proportional valve on injection unit – precise injection Self-closing nozzle Arburg Multilift Select robot, 6 kg traverse Year of manufacture: 05.2016 5-axis robot: 3 axes powered by electric servomotors; axes B and C Travel distances (axes): X-600, Y-800, Z-1000 Robot supplied with adapter, conveyor, and safety enclosure Purchase of robot and conveyor subject to surcharge Dimensions: Weight: 2210 kg Length/Width/Height: 3.18 x 1.43 x 1.98 m All machines offered are commissioned by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 30.364 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 228263, vpenjalna sila: 400 kN, premer vijaka: 25 mm, Here we, as a dealer in injection moulding machines (Spritzgussmaschinen/Spritzgiessmaschinen), present the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current legal update – Tax advice and benefit for used machines: As of 01.07.2025, used machines will also be eligible for a special tax depreciation rate of 30% per year. In addition to the lower price compared to new machinery, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 Abs. 2 EStG-E) Manufacturer: Arburg Model: 270C 400-100 e² Golden Edition Year: 2014 Control unit: Selogica Operating hours: approx. 30,364 h Clamping unit: Clamping force: 40 t / 400 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Ejector stroke: 125 mm max. / 30 kN Opening stroke: 350 mm Mould installation height: 200 mm Platen spacing: 550 mm Injection unit: Screw diameter: 25 mm Injection volume: 49 cc Iedpfoxx Dq Ujx Agpea Shot weight: 45 g/PS Injection pressure: 2000 bar Extras: High-wear-resistant cylinder screw Euromap 67 robot interface Color dosing unit interface Drill pattern for through-bolts (also ideal for older 220/2270 tools) Note: Visible peripheral devices such as loaders and robots etc. are not included in the scope of delivery. Weight / Dimensions: Weight: 2300 kg Dimensions: 3.41 x 1.43 x 1.90 m (LxWxH) - Immediately available ex our warehouse in Hanover, loaded or delivered free to destination against reimbursement of freight costs - Function tested From our warehouse in Hanover/Germany or delivered free to destination against reimbursement of freight costs. Available immediately. The machine will be offered after functional testing and is our sole property. The requested machine is immediately available in our Hanover warehouse, will be function tested, and can be inspected under power. For your information about the machines we offer and our company: - We only sell machines purchased from active production from our warehouse in Hanover. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency assets – we are NOT brokers handling third-party goods. - All machines offered come from successful companies where maintenance and care are a matter of course. - All machines offered can be inspected in our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 63.700 h, 1,0 kos rabljeni brizgalni stroj Proizvajalec: ARBURG Tip: 270S400-70 Leto izdelave: 2009 Zapiralna sila: 40 ton Razmak med stebri: 270 x 270 mm Premer polža: 18 mm Dozirni volumen: 23 cm³ Teža brizganca: 21 g/PS Krmiljenje: SELGOCIA Oprema: - Vmesnik za robota - 1 x izvlek jedra Obratovalne ure: cca. 63.700 ur Ijdpexq R D Esfx Agpja

Stanje: dober (rabljeno), Leto izdelave: 1998, Vpenjalna sila: 50 t Premer vijaka: 25 mm Razdalja med stebri V: 270 mm Razdalja med stebri H: 270 mm Tip: Horizontalen Isdpfxoxl Hpgs Agpsa Pogon: Hidravličen

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Na voljo je stara brizgalna stiskalnica Arburg in pet temperaturnih naprav HB-Therm. 1) Brizgalni stroj Arburg Allrounder 270S 250-70, zapiralna sila: 250kN, razdalja med stebri: 270mm/270mm, dimenzije plošč X/Y: 380mm/380mm, višinski razpon orodja: 200mm/550mm. 2) Temperaturna naprava HB-Therm HB-W 140, letnik izdelave: 1999, maks. temperatura: 140°C, pretok: 40l/min, maks. delovni tlak: 12bar, dimenzije naprave X/Y/Z: ca. 650mm/300mm/1000mm, teža: ca. 75kg. Ogled na lokaciji je možen. Ijdpfx Agjxvdfaspea

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 78.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 250 kN, premer vijaka: 18 mm, For sale is an injection molding machine from Arburg, model 270S 250-60. The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2001 Operating hours: 78,000 h Screw diameter: 18 mm Clamping force: 250 kN Needle shut-off: Pneumatic Ijdpou Hqhqefx Agpja Core puller: 1* Hydraulic Internal pressure sensor Transport and loading can be organized throughout Europe upon request and at an additional cost. Prices are plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you planning to sell your equipment? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Arburg 270C 500-100 Year of manufacture: 1998 Injection unit: Screw diameter: 20 mm Shot weight: 26 g Injection pressure: 2500 bar Metering volume: 31 cm³ Clamping unit: Clamping force: 50 t Tie bar distance: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface 1x hydraulic core pull Hot runner control Injection unit hardened – bimetallic The machine is equipped with an additional control panel – remote control capability The machine has been regularly serviced by authorized Arburg service technicians Dimensions: Weight: 2,200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Iedpfxoxz Anko Agpja Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 75.942 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 213141, vpenjalna sila: 400 kN, premer vijaka: 18 mm, razmak između stupova: 270 mm, Oprema: dokumentacija / priročnik, Here we offer, as a specialist dealer in injection molding machines, the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines with a year of manufacture from 2010 onwards. We have been wholesalers of injection molding machines for more than 25 years. Manufacturer: Arburg Model: 270C 400-70 Control system: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter chute - German language - Single ownership – origin Germany Regular maintenance by manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar distance: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between plates: 550 mm Isdpfx Agjwfua Aepsa Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump: 11 kW Heating: 4 zones, 4 kW Installed load: 15 kW Pre-fuse: 50 A Weight: 2,150 kg Warranty Warranty until initial commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hanover, Germany For your information regarding the machines and our company: - We only sell machines acquired from ongoing production out of our own stock in Hanover - All machines offered have been checked and tested before dismantling - We do NOT deal in insolvency goods – we are NOT brokers dealing with third-party assets - All offered machines come from successful companies for whom maintenance and servicing are a matter of course - All machines offered can be viewed at our warehouse

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, 1 used injection moulding machine Manufacturer: ARBURG Model: 270S350-60 Iedpfewqpmzsx Agpja Year of manufacture: 1998 Clamping force: 35 tons Tie bar distance: 270 x 270 mm Screw diameter: 25 mm Shot volume: 44 cm³ Shot weight: 40 g/PS Control system: SELGOCIA Equipment: - 1 x core pull - Selector unit - Robot interface

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Na voljo je osem brizgalnih strojev Arburg, en brizgalni stroj Engel in en brizgalni stroj Demag. 1) Arburg 270M 350-90, letnik: 1996, delovnih ur: cca. 110000h. 2) Arburg 270M 350-90 U, letnik: 1998, delovnih ur: cca. 108000h. 3) Arburg 270M 350-90, letnik: 1992, delovnih ur: cca. 178000h. 4) Arburg 420C 1000-250, letnik: 1995, delovnih ur: cca. 96000h. 5) Arburg 370C 800-225, letnik: 1992, delovnih ur: cca. 156000h. 6) Arburg 320M 500-90, letnik: 1991, delovnih ur: cca. 94000h. 7) Arburg 270M 350-90 U, letnik: 1998, delovnih ur: cca. 83000h. 8) Arburg 630S 2500-675, letnik: 2003, delovnih ur: cca. 93000h. 9) Demag Viva 100-400, letnik: 1999, delovnih ur: cca. 116000h. 10) Engel ES 500/100 HLS, letnik: 1998, delovnih ur: cca. 103000h. Ogled na lokaciji je možen. Možen je tudi posamičen nakup. Iedpoxrf Nrsfx Agpea

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 63.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 400 kN, premer vijaka: 25 mm, For sale is an injection molding machine from Arburg, model 270S 400-60. The machine is fully functional and ready for immediate use. Technical data: - Year of manufacture: 2005 - Operating hours: 63,000 h - Cylinder: Ø 25 - Clamping force: 400 kN - Core pull: 1x hydraulic - Internal pressure transducer Transport and loading can be organized throughout Europe for an additional charge upon request. Isdpfx Aeu Hqh Rjgpja Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINERY AND MUCH MORE. Do you need a high-quality yet affordable metal processing machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Arburg 270C 400-70 Year of manufacture: 2007 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Screw diameter change possible Ijdpfsxz Am Tsx Agpea Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 72.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 208574, Oprema: dokumentacija / priročnik, Here, as a trading company for injection molding machines, we are offering the following well-maintained used injection molding machine: We are, of course, also actively purchasing well-maintained injection molding machines from model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year: 2008 Operating hours: 75,942 h Machine number: 208574 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Part separator - German language - One previous owner – origin Germany Regular maintenance by manufacturer and previous owner. Clamping unit: Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen size: 446 x 446 mm Opening stroke: 350 mm Minimum mold height: 200 mm Max. distance between platens: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2500 bar Electrical equipment: Pump: 11 kW Heating: 4 zones, 4 kW total installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty Warranty valid until initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery by arrangement (freight charges extra) Available ex stock Hanover, Germany Additional company and machine information: - We only sell machines purchased from active production from our warehouse in Hanover - Every machine offered is inspected and tested before decommissioning - We do NOT sell bankruptcy assets – we are NOT brokers dealing with third-party assets Iedpfx Aswn Nr Eogpea - All machines offered originate from successful businesses, for whom maintenance and care are a given - All machines offered can be viewed at our warehouse

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. Ijdetyyn Hopfx Agpoa 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), Zapiralna sila: 500kN, razdalja med stebri: 270mm/270mm, hod odpiranja: 325mm, minimalna vgradna višina orodja: 225mm, največja odprtina plošč: 550mm, dimenzije vpenjalnih plošč X/Y: 500mm/500mm, dimenzije stroja X/Y/Z: pribl. 3700mm/1400mm/1900mm, teža: pribl. 1750kg. Ogled na lokaciji je možen. Ijdpfx Ajxltvmsgpoa

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, clamping force: 350kN, screw diameter: 20mm, tie bar distance: 270mm, max. injection volume: 31cm³, operating hours: 61,737h. Documentation available. On-site inspection possible. Isdpfx Agst E Tq Dspea

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Arburg 270 M-350-90 U Isdpog S I S Ajfx Agpea Schließkraft: 35 t Baujahr: 1997 Schneckendurchmesser: 25 mm Holmenabstand: 270 x 270 mm