Stroj za brizganje

Arburg 270S 250-60 182316

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Zapiralna sila: 25 ton Razdalja med stebri: 270x270 mm Največja odprtina: 275 mm Višina orodja: 200 mm Velikost orodne plošče: 400 x 400 mm Premer polža: 18 mm Volumen vbrizga: 20 cm3 Fsdpfsvl Skgjx Abrjpn Masa brizga: 17 g Tlak vbrizga: 2500 bar Delovne ure: 38.035 h

Stanje: novo, MOŽNOST NAKUPA ALI NAJEMA Prosimo, da preberete vse tehnične podatke. Če je ta stroj primeren za vas kot investicija, vas prosimo, da za pripravo ponudbe posredujete popolne kontaktne podatke z veljavno telefonsko številko in e-poštnim naslovom. Vlakenasti laser 30 W Površina za označevanje: 200 x 200 mm Maksimalna velikost obdelovanca: Š x V x G: 550 x 450 x 350 mm Vrsta laserja: Vlakenasti, 30 vatov Valovna dolžina: 1064 mm Maksimalna hitrost označevanja: 7000 mm/s Motorizirana os Z, višina: 700 mm Fpedpfxeru E Svs Abron Natančnost ponavljanja/leča: +/- 0,001 mm Minimalna širina črte: pribl. 0,01 mm Napajanje: 240 V/50 Hz Zunanje mere: 110 x 80 x 200 cm Sprednja vrata: ročna Vključno s programsko opremo in računalnikom Možnost ogleda stroja na kraju samem, priključenega na električno omrežje. Cena neto, brez DDV.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Fpjdpov D Nxljfx Abron Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 300 h, vpenjalna sila: 400 kN, skupna masa: 2.180 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SELOGICA direct, Hidravlični stroj za brizgano oblikovanje, letnik 2019. Ta Arburg ALLROUNDER 270 C 400-100 ima silo zapiranja 400 kN in hod odpiranja 350 mm. Ima največji brizgalni tlak 2500 barov in brizgano težo do 29 g. Če iščete visokokakovostne zmogljivosti za brizgano oblikovanje, razmislite o modelu Arburg ALLROUNDER 270 C 400-100, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. Fpodpfx Abjzvm Azsren - Nadzor: SELOGICA direct - Sila zapiranja: 400 kN - Sila odpiranja: 130 kN - Hod odpiranja: maks. 350 mm - Višina pritrditve kalupa (min.): 200 mm - Razdalja med ploščami (maks.): 550 mm - Razdalja med stebri (Š x V): 270 x 270 mm - Dimenzije plošče kalupa (Š x V): maks. 446 x 446 mm - Teža premikajoče se polovice kalupa: maks. 180 kg - Izmetna sila / hod: maks. 30 kN / 125 mm - Čas suhega cikla (EUROMAP): 1,2 – 189 s-mm - Velikost brizgalne enote: 100 - Premer vijačnega valja: 20 mm - Učinkovita dolžina vijačnega valja (L/D): 25 - Hod vijačnega valja: maks. 100 mm - Izračunana prostornina hoda: maks. 31 cm³ - Teža vbrizga (PS): maks. 29 g - Pretok materiala (PS / PA6.6): maks. 5,5 kg/h / 2,8 kg/h - Največji brizgalni tlak: 2500 bar - Največji tlak po vbrizgu: 2500 bar - Največja hitrost vbrizga: 64 cm³/s - Največji navor vijačnega valja: 120 Nm - Sila pritiskalne šobe / hod umika: maks. 50 kN / 180 mm - Moč gretja: 4,95 kW - Prostornina lijaka: 1,8 l - Napetost: 400 V 3~ 50 Hz - Nadzorna napetost: 230 V ~ 50 Hz / 24 V DC - Nazivni tok motorja / grelca: 42 A / 11 A - Skupni nazivni tok: 53 A - Skupna priključna moč: 29 kW - Moč črpalke: 11 kW - Prostornina hidravličnega olja: 165 l - Neto masa stroja: 2.180 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, 1,0 kos rabljeni stroj za brizganje plastike Proizvajalec: DR. BOY Tip: 22 D Leto izdelave: 1999 Zapiralna sila: 22 ton Razdalja med stebri: 254 x 254 mm Vgradna višina MIN. / MAKS.: 200 / 400 mm Premer vijačnega polža: 22 mm Teža brizganega kosa: 27 g/KM Fodjzaqzdopfx Abrjpn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 500 kN, tlak vbrizgavanja: 2,2 letvica, For sale is an injection molding machine from Arburg, model 320 S 500-150. The machine is fully functional. Fpodpfxoqmn Egs Abrjn Technical data: - Clamping force: 500 kN - Tie bar spacing: 320 mm x 320 mm - Mold height: 225-350 mm - Platen dimensions: 445 mm x 445 mm - Maximum platen opening: 550 mm - Screw diameter: 30 mm - Injection pressure: 2,200 bar - Weight: 2,250 kg On request and for an additional charge, we can organize disassembly, loading, and transport for you across Europe. Prices are subject to VAT. Viewing possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF MACHINING & METALWORKING MACHINES AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, vpenjalna sila: 400 kN, premer vijaka: 30 mm, injekcijska masa: 79 g, Hydraulic injection molding machine from 2018. The Arburg ALLROUNDER 270 S 400-100 offers a maximum clamping force of 400 kN and screw diameters of 15 mm, 20 mm, or 30 mm. The maximum injection pressure is 2,500 bar for the smaller screws, and the maximum shot weight is 79 g when equipped with the largest screw. If you are looking for high-quality injection molding machines, you should consider the Arburg ALLROUNDER 270 S 400-100, which we have for sale. Contact us for further details. • Tie bar spacing: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) Fsdpfoy Nkwljx Abrepn • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic delivery volume: 1,000 l/min per circuit • Heating capacity per control loop: 3.6 kW / 230 V (protected by 16 A) • Drive motor voltage: 380-480 V (50-60 Hz)

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller Fedpfofnvviex Abropn *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20250108, skupna višina: 2.200 mm, skupna masa: 700 kg, skupna dolžina: 1.700 mm, skupna širina: 1.300 mm, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 75 kg, kapaciteta rezervoarja: 120 l, uporabna prostornina rezervoarja: 60 l, vhodna napetost: 400 V, vrtljajska hitrost (min.): 50 obr/min, največja hitrost vrtenja: 180 obr/min, moč: 4 kW (5,44 KM), vhodni tok: 16 A, trajanje garancije: 12 meseci, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The Turbo-Line 120 “S” model features a stainless steel discharge chute that is mounted directly on the deburring machine. When the bowl lowers, the abrasive media passes through a grid, while the parts to be deburred remain on top. Fpsdpfx Abjvvu Sneren This Turbo-Line machine includes a 120-liter drum with vertical, straight sides and a separate base that rotates at an adjustable speed—normally between 115 and 135 rpm, but adjustable from 50 to 180 rpm. During operation, the abrasive media inside the bowl creates a uniform, spiral movement reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. The 120-liter process container can handle up to 50–60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually controlled via a manual touchscreen. Water and compound are added through a manually adjustable ball valve, which is included in the scope of delivery. Finished products are discharged by tilting the bowl, a process controlled via the touchscreen. The discharge speed can also be adjusted via the frequency inverter on the touchscreen.

Stanje: rabljeno, Leto izdelave: 2008, Premer polža 18 mm Zapiralna sila 250 kN Maks. odprtina 350 mm Višina vgradnje orodja 200 mm Krmiljenje Selogica Obratovalne ure 52.492 h Teža 2030 kg ARBURG ALLROUNDER 270 S 250-70 – brizgalni stroj – leto izdelave 2008 – ODLIČNO stanje Vmesnik za robotski sistem po EUROMAP 67 je na voljo Naprodaj je zanesljiv in preizkušen brizgalni stroj ARBURG ALLROUNDER 270 S 250-70 iz leta 2008. Stroj je idealen za natančne plastične dele v malih in srednjih serijah ter prepriča s svojo robustno konstrukcijo in znano kakovostjo ARBURG „Made in Germany“. Tehnični poudarki: - Zapiralna sila: 250 kN - Brizgalna enota: velikost 70 - Premer polža: cca 18–25 mm - Tlak brizganja: do cca 2.500 bar - Razdalja med stebri: cca 270 x 270 mm - Montažne plošče: cca 380 x 380 mm - Priključna moč: 53 kW Električna oprema: - Obratovalna napetost: 400 V / 50 Hz - Napetost krmiljenja: 230 V / 24 V - Skupni tok: 89 A Dodatne informacije: - Leto izdelave: 2008 - Proizvajalec: ARBURG (Nemčija) - Stroj je robusten, vzdržljiv in enostaven za vzdrževanje - Idealen za tehnične plastične dele in precizne aplikacije Prednosti: - Preizkušeno SELOGICA-krmiljenje (značilno za to serijo) - Kompaktna zasnova - Visoka procesna varnost Fpedpsywzv Iefx Abron - Dolgoročna dobava rezervnih delov zagotovljena Ogled možen po dogovoru. Dodatne informacije, slike ali videoposnetke lahko pošljemo na zahtevo. - Obratovalne ure: 52.492 h, 7.085.048 ciklov - Sprejemi za centrirne obroče ø125 mm - Na voljo puhalna enota