Maka Cnc nakup rabljenega (45)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 2000mm/1000mm/650mm, axes: 5, spindle power: 10kW, speed: 27,000 rpm, control system: Siemens Sinumerik 840 DSL, weight: approx. 7,000kg. An on-site inspection is possible. Kdsdpjugmxiofx Ah Dsu

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 5 Dodatna oprema Energetske verige: različni modeli Ta 5-osni CNC lesnoobdelovalni center MAKA FPM 470 je bil izdelan leta 1999. Je idealen za zahtevne lesnoobdelovalne projekte, saj omogoča natančnost in vsestranskost. Če iščete visokokakovostne možnosti rezkanja, razmislite o stroju MAKA FPM 470, ki je na voljo za prodajo. Za več informacij o tem stroju nas kontaktirajte. Kdodpfx Aowpyc Reh Deu Vrste uporabe CNC obdelava lesa

Stanje: rabljeno, CNC machining center MAKA type KPF 555 for woodworking. Special price ex location. Table width: 1,300 mm Table length: 6,000 mm Gantry height above suction cups: approx. 200 mm Gantry height above console: approx. 250 mm Kdodpfx Ahsvdurws Deu Main spindle: 8 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, on request Kjdpfx Ahofxgmgo Dsdu

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), A CNC 4-axis milling and drilling machine Maka for plastics, wood, and aluminum is available. Travel range X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle interface: HSK63, spindle power: 12kW, spindle speed: 24,000 rpm. Tool stations: 12, angle head positions: 3. Machine dimensions X/Y/Z: 12,000mm/5,700mm/3,200mm, control system: BWO 920. Documentation available. An on-site inspection is possible. Kdsdsvmq Tvspfx Ah Deu

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 12,100 mm / 2,350 mm / 800 mm, A-axis swivel: +/-98°, Rapid traverse X/Y/Z/A: 45 / 45 / 24 / 10 m/min, Machining length: 11,000 mm, Spindle speed: 24,000 rpm, Table: 10 support traverses, 2 hydraulically swiveling workpiece stops, Control: BWO 930, Operating hours: 23,792 h, Dimensions X/Y: 18,300 mm / 6,250 mm. Includes travelling gantry design with dual-sided gantry drive, coolant spray system with minimal-quantity fine atomization. Documentation available. Kdsdpfx Ajtqfqxjh Dsu

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Kjdpfx Ahsw I Uine Dedu Stanje: servisirano v delavnici Toga rezkalna vretena; na novo ležajena s podaljšavo mize z izvlečno okvirno oporo 2500 mm Motor 5,5 kW Število obratov 3000/4500/6000/8000/10000 min⁻¹ Rezkalni prislon z 2 nastavitvami; skupni prislon in zadnja snemljiva čeljust Sesalne šobe 120 mm avtomatska motorna zavora Desno-levi tek s podajalnikom Haffner s 4 valji Teža pribl. 700 kg Razpoložljivost: po dogovoru Lokacija: Flörsheim

Stanje: rabljeno, Leto izdelave: 1973, Lokacija skladišča: Nattheim Kjdpfovvkt Uex Ah Dodu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Allgemeine Daten Maße Breite 3500 mm Maße Tiefe 6000 mm Maße Höhe 3400 mm Maschinengewicht 7000 kg Hauptantrieb Spindeldrehzahlbereich 24000 U/min Spindelmotorleistung 10 kW Werkzeugaufnahme HSK 63F Anzahl der Achsen 5 Verfahrwege Ksdpfxoxmbyvs Ah Djdu X-Achse Verfahrweg 2900 mm Y-Achse Verfahrweg 1740 mm Z-Achse Verfahrweg 1050 mm Werkzeuge Maximales Werkzeuggewicht 3 kg Zusätzliche Ausstattung MAKA Schutzverkleidung, oben offen und vorne mit zwei manuell zu öffnenden Türen Dieses 5-Achs-Bearbeitungszentrum MAKA MK 7s wurde 2007 gefertigt. Es verfügt über einen robusten 7000-kg-Rahmen, läuft mit 400V/50Hz und hat eine Nennleistung von 18,5 kW. Die Maschine ist mit einer BWO 910 RC Steuerung und einer vielseitigen HSK 63F Frässpindel ausgestattet. Das lineare Werkzeugmagazin fasst Werkzeuge und Sägeblätter und wird durch einen Aluminium-Aufspanntisch mit den Maßen 2000 x 1000 mm ergänzt. Nutzen Sie die Gelegenheit, dieses MAKA MK 7s Horizontal-Bearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Einsatzbereiche Fräsen

Stanje: rabljeno, Leto izdelave: 1996, MAKA HC 57 R (Robot) Centre d'usinage CNC 5 axes Type HC-57 R / No de machine 420 747 / Année de fabrication 1995 / No de schéma électrique 320 177 La machine est opérationnelle et présente une construction extrêmement robuste (broche de fraisage, changeur d’outils, pompe à vide, support, etc.) et elle est dotée de l’électronique présente (commande, cartes enfichables, convertisseur). Elle présente une usure conforme à l'âge au niveau du câblage, des conduites d’air, des conduites de lubrification de la lubrification centrale, etc. Elle fonctionne et est prête à l’emploi, mais, en raison de l’usure mentionnée, elle est proposée comme donneuse de pièces ou pour remise en état. Kdodpfx Ahjw Rq S Rj Dou Enlèvement sur place 41334 Nettetal, au quai de l’atelier. Prix à débattre. Si aucun acquéreur n’est trouvé pour la machine complète assemblée, le centre d’usinage sera démonté. Les pièces détachées seront ensuite mises en vente séparément. Les personnes intéressées par des pièces de rechange pour MAKA peuvent nous contacter à l’avance pour des détails ou des demandes de pièces de rechange.

Stanje: rabljeno, Leto izdelave: 1999, Dowel hole drilling unit: pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Kdjdpfxsv S Diuj Ah Deu Weight: 250 kg

Stanje: zelo dobro (rabljeno), Kataloška številka 7266 TEHNIČNI PODATKI - širina valja: 530 mm - valj s 4 noži - dušilni greben - zaščita za valj - dolžina miz: 2900 mm - daljša dovajalna miza: 1655 mm - litoželezne mize - obe mizi nastavljivi - originalno nastavljivo litoželezno vodilo - zavora - premer izhodne cevi za odsesavanje: 140 mm - motor: 4 kW - dimenzije (d/š/v): 2900x1000x1210 mm - teža: 695 kg PREDNOSTI – nemška proizvodnja – valj s 4 noži – zavora – dušilni greben – daljša dovajalna miza – brez premaza – uporabljan izravnalni stroj, v zelo dobrem stanju Originalne fotografije Video zagona stroja: youtube.com/watch?v=v_3ECkLDWVI Cena brez DDV: 18.900 PLN Kdedpfx Aorm Nfbsh Dju Cena brez DDV: 4.440 EUR (po tečaju 4,25 EUR) (Cene se lahko spremenijo glede na valutna nihanja)

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9303346, MAKA Surface Planer Type AH-530 Used Machine Machine No.: 9303346, Year 1994 Item Number: JA_G250302 Description Planing width: 530 mm Planer knives: Strip knives, 4-knife shaft Max. cutting depth: 8 mm Hollow / pointed joint: ---- Cutter block diameter: 120 mm Kdjdpfx Ahov Tacte Dou Speed: 5,000 rpm Knife guard: Bridge guard Working height: 810 mm Infeed table: 1,650 mm Outfeed table: 1,190 mm Fence: 90°–45° Auxiliary fence: Yes Power supply 380V/50Hz: 4.0 kW Dimensions (LxWxH): 2,900 x 900 x 1,200 mm Dust extraction port: 140 mm Approx. weight: 850 kg Condition / Work Performed • Machine cleaned • Machine functionally tested • Age-related and usage-related signs of wear • Available ex-stock Errors and technical modifications reserved. Note on Used Goods: • Prices are ex-works (unless otherwise stated) from our site in Ottendorf-Okrilla, Germany – loaded free of charge (unless otherwise noted) • Subject to prior sale! • You will receive an invoice with separately stated VAT. • All items are sold as inspected, without any warranty claims. Buyers are encouraged to inspect items on site. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Any items shown in the background of images are not part of the delivery. • Saw blades shown are for illustration purposes and are not included in the scope of delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our site in Ottendorf-Okrilla is free of charge by prior arrangement. (Setup and on-site instruction for demonstration purposes are available by prior arrangement!) • Delivery is partially disassembled. • Optionally, our trained service staff can set up the machine on site and provide a brief introduction. Travel and service times at additional cost.

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Kodpfx Ahsv Hm Nmo Djdu Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, obratovalne ure: 52.751 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 975 mm, pomik osi Y: 9.100 mm, pomik po osi Z: 575 mm, nazivna (navidezna) moč: 12 kVA, proizvajalec krmilnikov: BWO, model krmilnika: CNC 920, dolžina obdelovanca (maks.): 8.500 mm, širina obdelovanca (maks.): 450 mm, višina obdelovanca (maks.): 225 mm, vrtljajska hitrost (min.): 1.000 obr/min, največja hitrost vrtenja: 20.000 obr/min, skupna masa: 16.600 kg, število vreten: 1, število mest v zalogovniku orodij: 32, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, neprekinjen delovni tlak: 6 letvica, MAKA AP70 5-Axis Year of manufacture: 2005 Portal weight including unit and tool changer approx. 15,000 kg Control cabinet weight approx. 1,600 kg Operating voltage 400 V / 50 Hz Operating pressure 6 bar Compressed air consumption approx. 2,000 liters/hour uncompressed Control type BWO CNC 920 Controlled axes + max. traverse paths approx.: X - 975 / Y - 9100 / Z - 575 / A - ±270° / B - ±98° Milling motor HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 slots / 160mm Machine table: 2 clamping stations with 6 support beams with clamping / pneumatic clamping devices Kedpfx Ahev Rlpyo Dsdu Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - ±270° / B - ±98° The machine is currently not operational. The spindle including conversion kit to newer software needs to be replaced (can be requested from Maka). The machine can be inspected under power at DE94424 Arnstorf by appointment. All information without guarantee, sale only to commercial buyers. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. Kdsdpfouq Scpox Ah Dsu The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges.

Stanje: rabljeno, Leto izdelave: 1993, Working width: 180 mm Working height: 120 mm Working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power bottom spindle: approx. 5.5 kW Motor power right spindle: approx. 5.5 kW Motor power left spindle: approx. 5.5 kW Motor power top spindle: approx. 5.5 kW Adjustment bottom spindle: handwheel Adjustment right spindle: handwheel Adjustment left spindle: handwheel Adjustment top spindle: electric Cutterheads: reversible knife Kodpfx Aopn Nypjh Djdu Feed speed: stepless Feed roller pressure: spring-loaded Power consumption: 20 kW Motor brake: - Extraction connection: Machine length: Machine width: Weight:

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Max. cutting height: 100 mm, saw blade diameter: 250–400 mm, bore: 30 mm, sliding table length: 2,600 mm, motor power: 5.5 kW, length: 3,100 mm, width: 2,400 mm, height: 1,500 mm, weight: 770 kg. On-site inspection is possible. Kdjdpfxjurwyvs Ah Deu

Stanje: zelo dobro (rabljeno), 4 kW motor Saw with scoring blade Adjustment of saw angle Adjustment of cutting angle Table length 150 cm Ksdpfor Ddkasx Ah Dedu

Stanje: rabljeno, Leto izdelave: 2001, No. 04450 Bandsaw MAKA HB 500 Used, year of manufacture 2001 Wheel diameter: 500 mm Table dimensions: 680 x 515 mm (L x W) Cutting capacity: 300 x 480 mm (H x W) Wheel width: 35 mm Blade length: 3950 mm Motor power: 1.5 kW Heavy-duty steel box-frame construction, balanced cast iron wheels APA precision roller guides Work table tiltable up to 20° Machine is mobile Transport dimensions approx. 1200 x 800 x 2000 mm (L x W x H) Weight approx. 300 kg To avoid misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale With used machines, any warranty is excluded; sold as inspected applies. Kjdpfx Aovn Tl Deh Dodu Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex stock or location

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21003600, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 650 mm, model krmilnika: BWO 910, delovne ure vretena: 200 h, Spindle was retrofitted in 2024 and has only 200 operating hours! Reason for selling the machine: Space required for a new acquisition. TECHNICAL DETAILS Travel distance X-axis: 1,500 mm Travel distance Y-axis: 1,500 mm Travel distance Z-axis: 650 mm (with 130 mm tool length) Table size: 1,500 x 1,500 mm Table height: 870 mm Control model: BWO 910 Spindle & Cooling Spindle type: High-speed milling spindle HSD Spindle retrofit: September 2024 to ES 951 (air-cooled, value: €14,000) Max. speed: 24,000 rpm Spindle operating hours: 200 h Tool system Tool holder: ISO 30 + special clamping bolts Number of tool magazine slots: 20 MACHINE DETAILS Total length: 5,640 mm Total width: 2,570 mm Total height: 4,200 mm Total weight: 8,500 kg EQUIPMENT - Flat table, tandem version with separate clamping circuits - Drum-type tool changer: - X-axis: fixed at X-zero, 4 slots for angle heads and special tools - Y-axis: travelling, 10 slots, max. D 60 Kjdpfxsv Hnn Do Ah Dodu - Milling unit for flexible machining options

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, MAKA BC 150t compact, used machine 5-axis CNC machining center for processing aluminum and plastic. Gantry-type bridge construction with 4 columns, 2 x aggregate carriers. Kdjdjtq Hkropfx Ah Dou Technical Data: Working areas in 5-axis operation, with tool Ø 160 mm / tool length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm (with 180 mm fixture height) Linkable tables for machining large parts. Extended travel stroke for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotary axis 540° / Swivel axis 196° (+/- 98°) Table design: - 2 x aluminum surface tables, size 2,500 x 1,500 mm - Threaded bushings M10 and centering pins in the tabletop - 3 x vacuum clamping circuits per table - 3 x pneumatic clamping circuits per table Milling units: - 2 universal aggregates for 5-axis milling, with 50° angle head, HSK F63 tool holder, max. power 12.5 kW (S1), infinitely variable speed up to 24,000 rpm, water-cooled milling spindle - 1 NC height-adjustable chip extraction system per milling unit, with lamella curtain Tool changer: - 2 x rotary disc tool magazines with 20 positions each Control system: - 1 x Siemens SINUMERIK 840D SL machine control - 1 x Siemens OP 19 PCU operator panel with 19" display, full keyboard, membrane keypad - 1 x additional Siemens HT 8 portable handheld operating unit with 7.5" touchscreen, version with manual pulse generator Safety equipment: - 1 soundproof enclosure - 2 automatic loading doors with viewing windows - Loading and unloading areas safeguarded by light barriers and bumpers on the tables Measuring probes: - 2 x 3D radio measuring probes, HSK F63 interface, for automatic changing from the tool magazine Minimum quantity lubrication: - 2 minimum quantity lubrication units - 2 spray nozzles per milling unit, individually controllable via M-function Table air blow-off system: - 2 x air knife table blow-off systems for cleaning the tables during traverse out of the machining area (limited in coupled operation) The machine is installed and can be inspected in 89568 Hermaringen.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Kedpfxjt Dl U Es Ah Dsdu Variable spindle speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Ksdpfx Asir Aq Teh Dsdu Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min A/B-axis: 10,000 °/min 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.