Maka Hc 57 R nakup rabljenega (45)

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R 5-Axis CNC Machining Center for processing wood, plastic, and aluminum. Gantry design with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min. Blsdpfx Asvmywqefnod Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool Magazine: - Tool interface ISO 40 for automatic tool changing system. - 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic release device for rapid positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for slide bar "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm. Tools: Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer. Vacuum System: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up. - 10 vacuum supports with various suction pads. - Various clamping devices for posts and curved elements. - Stops raise / lower for workpiece positioning. Miscellaneous: - Automatic central lubrication system. - Control cabinet with climate control unit. - Projection laser Occupational Safety: - Moving protective cabin with safety bumpers on the operator side.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. Bsdsvmpx Rspfx Afnsld The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Stanje: rabljeno, Leto izdelave: 2000, Used Machine MAKA CNC Door Processing Center HC 55 TBZ Year of Manufacture: 2000 Door processing center for machining interior doors (hardware recessing, light cut-outs, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Bljdpfjv S Dn Dox Afned Working ranges: for door width: 250 – 1,280 mm for door height: max. 2,500 mm for door thickness: max. 80 mm Rapid traverse speed: X-/Y-axis 45 m/min. Z-axis 10 m/min. 1 universal milling unit SK40 with integrated A swivel axis 190° (+/- 95°), in X-axis direction for lock/hinge processing on both sides along the door edge directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, speed infinitely variable from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain tool magazine with 24 stations, for tools up to Ø 90 mm, with sorted storage up to max. Ø 160 mm, arranged at the unit exit position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 magazine stations set up for use of angle/probing heads with torque support. Machine table with programmable width adjustment and width measurement for processing with edge bander for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically liftable and lowerable. 1 longitudinal stop with pneumatic setting stroke, mounted traveling with the unit for positioning to door length and door thickness. 4 pneumatic stops, swinging in from the side, for doors with veneer/overlapping face panels up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single-/double-rebate doors). 2 vacuum clamping lines, each with 5 vacuum cups, 130/200 x 70 mm, with feeler valve and blow-off equipment. Per line, 3 vacuum cups lowerable to match door height being processed. 1 vacuum pump approx. 128 m³/h suction capacity, with 250-liter buffer tank, for quick vacuum buildup. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the gantry, side safety fence. Various tools and tool holders can be included by prior arrangement. The machine can be inspected in Hermaringen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, on request Bsdpfx Afsfxgmgsnold

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Variable spindle speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Bjdpfxjt Dl U Ee Afnold Including installation and commissioning with handover ready for production!

Stanje: zelo dobro (rabljeno), Motor power 2.02 kW Pneumatic clamps Pneumatic depth adjustment Blsdpfx Afoh Im S Njnod Arm length 220 cm Working depth 16 cm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 21003600, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 200 h, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 650 mm, model krmilnika: BWO 910, delovne ure vretena: 200 h, Spindle was retrofitted in 2024 and has only 200 operating hours! Reason for selling the machine: Space required for a new acquisition. TECHNICAL DETAILS Travel distance X-axis: 1,500 mm Travel distance Y-axis: 1,500 mm Travel distance Z-axis: 650 mm (with 130 mm tool length) Table size: 1,500 x 1,500 mm Table height: 870 mm Control model: BWO 910 Spindle & Cooling Spindle type: High-speed milling spindle HSD Spindle retrofit: September 2024 to ES 951 (air-cooled, value: €14,000) Max. speed: 24,000 rpm Spindle operating hours: 200 h Tool system Tool holder: ISO 30 + special clamping bolts Number of tool magazine slots: 20 MACHINE DETAILS Total length: 5,640 mm Total width: 2,570 mm Total height: 4,200 mm Total weight: 8,500 kg EQUIPMENT - Flat table, tandem version with separate clamping circuits Bodev Hnn Dspfx Afnold - Drum-type tool changer: - X-axis: fixed at X-zero, 4 slots for angle heads and special tools - Y-axis: travelling, 10 slots, max. D 60 - Milling unit for flexible machining options

Stanje: rabljeno, Leto izdelave: 1999, Used Machine MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn parts. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Design / Version: Gantry-type machining center with 2 aluminum tables Axis Information: Axis: Size / Travel Distance / Speed X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Machine Connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Working areas / Workpiece cube size: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specified values are based on a fixture height of 170 mm / tool length 60 mm. 1 Equipment 1.1 Table Design 2 aluminum surface tables with threaded bushings for clamping, each 1,000 x 1,000 mm in size. Tables can be coupled for processing large components. Both table plates additionally receive threaded bushings and locating bushings (or dowel pins) for accepting the customer’s milling fixture as specified. 1.2 Vacuum supply Machine is equipped with a vacuum system. 1 vacuum pump 1.3 Clamping system 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-connect couplings mounted to the machine table. 1.4 Milling unit: 1 pc. DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis drives Blsdsv S Ut Depfx Afnsd Ball screw in X-, Y-, and Z-axes; A/B-axes with hollow-shaft drives. 1.6 Operator safety One automatic sliding door per table. Including safety cabin. 1.7 Control system 1 pc. BWO 900 machine control, with 1 pc. BWO 900C operating panel mounted on a mobile operator's console. 1.8 Power supply Machine is designed for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine power supply is not permitted. 1.9 Country specification Technical machine documentation in German. Consisting of: - Operating manual for the machine - Operating manual for the control system - Wiring diagrams for electrical and pneumatic systems - Control language in German.

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min A/B-axis: 10,000 °/min 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Bsdpfx Afsir Aq Tjnjld Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Leto izdelave: 1990, Stanje: dober (rabljeno), I am selling a MAKA door manufacturing machine Year of manufacture: 1990 Combined oscillating slot drilling and drilling machine. Bodpfx Afogiwl Denjld Available for immediate sale.

Leto izdelave: 1997, Stanje: potreben popravila (rabljeno), Mazitno rezkalni stroj Maka DB-6 V, rabljeno, letnik 1977 Proizvajalec: Maka Model: DB-6 V Opis: VERTIKALNI MAZITNI REZKALNI STROJ MAKA DB-6 V, leto izdelave: 1977. Stanje stroja: zelo dobro po generalni obnovi. Vrsta ponudbe: rabljeni stroj. Lokacija: Poljska. Tehnični podatki: ZELO POMEMBNO – STROJ JE VERTIKALNI IN PO OBNOVI. Letnik: 1977 Blodsfd Rxqjpfx Afned

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Dva stroja Maka: Rok výroby: 1999 · Výrobné číslo: 422 799 Hlavné technické údaje Blodjxwux Tjpfx Afnod Model: MAKA KPF 334R Ovládanie: BWO 900C CNC (integrovaný PC, cca 1 MB pamäte) Pracovná oblasť: X = 1 000 mm, Y = 1 000 mm, Z = 300 mm (výška upnutia cca 120 mm) Osi A/B: A = 540°, B = ±100° (celkovo 200°) Rýchloposuv: X/Y = 45 m/min, Z = 15 m/min, A/B = 10 000°/min Vreteno: HSD vysokootáčkové vreteno – 6,8 kW, 2 000–24 000 ot./min, keramické ložiská, vzduchom chladené (menovitý výkon od 12 000 ot./min) Upínanie nástrojov: Kužeľ SK30; zásobník na 10 nástrojov (náradie do Ø60 mm, dĺžka cca 130 mm v závislosti od priemeru) Stôl: Hliníkový pracovný stôl cca 1 000 × 1 000 mm (T-drážky / rastrové otvory) Vákuum: Vákuový upínací systém (vákuová pumpa obvykle cca 54 m³/h pri podobných modeloch) Mazanie: Centrálne automatické mazanie Elektrika: 400 V, 50 Hz (overiť na mieste) MAKA KPF 334 RT – 5-osé CNC obrábacie centrum Rok: 1999 · Výrobné číslo: 422 799 Hlavné technické údaje – MAKA KPF 334 RT Pracovné pojazdy: X cca 2 750 mm · Y cca 2 400 mm · Z cca 700 mm Otočná os A: cca 540° · Otočná os B: cca 200° Rýchloposuv: X/Y cca 40 m/min · Z cca 15 m/min · A/B cca 10 000°/min Dva pracovné stoly: cca 1 000 × 1 000 mm (možnosť spojenia) Ovládanie: BWO 900 / BWO 900C CNC Vreteno: vysokorýchlostné obrábacie vreteno (napr. cca 27 000 ot./min) Zásobník nástrojov: bubnový, viacpolohový (nástroje do Ø60 mm / dĺžka cca 130 mm – overiť podľa konkrétneho stroja) Vákuový upínací systém a centrálne automatické mazanie Elektrika: 400 V / 50 Hz (kupujúci overuje kompatibilitu pripojenia)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. Bljdpov Hm Nmsfx Afnjd (Inquiries will only be answered with your address and phone number!)

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Bledpfsw I Uinjx Afnsd Leto izdelave: 1993 Oprema in tehnični podatki: - toga rezkalna vretena; novo ležajenje - z razširitvijo mize z izvlečnim okvirjem dolžine 2500 mm - motor 5,5 kW - Hitrosti: 3000/4500/6000/8000/10000 obr/min - Rezkalni prislon z 2 možnostma nastavitve: - skupni prislon - zadnje sprejemne čeljusti - Sesalne kapuce: 2 x 120 mm - Samodejna motorna zavora - Desni/levi tek - s Haffner podajalnikom s 4 valji Teža cca 700 kg Razpoložljivost: po dogovoru Lokacija: Flörsheim

Stanje: rabljeno, Leto izdelave: 1973, Lokacija skladišča: Nattheim Bledpovvkt Ujfx Afnsd

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Levo-desni tek, 3-1000 obr/min, Zavorni motor s Haffner 3-valjnim podajalnikom, 8 hitrosti dobro ohranjen Bodpfjybv A Aex Afnsld Prevoz je možen z doplačilom!

Stanje: zelo dobro (rabljeno), Število vtiskovalnih agregatov: 1 kos Maks. globina vtiskovanja: cca 130 mm Priključna moč: 2,5 kW Vertikalna nastavitev: 100 mm Nihajni dleto stroj Maka tip STV 170 za vtiskovanje oziroma izrezovanje pravokotnih lukenj, kot npr. za ključavnice. Bjdsyi Hufjpfx Afnsld

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.740 mm, pomik po osi Z: 1.050 mm, skupna višina: 3.400 mm, skupna masa: 7.000 kg, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 10.000 W, teža orodja: 3.000 g, število osi: 5, This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust frame weighing 7,000 kg, operates at 400V/50Hz and has a rated power of 18.5 kW. The machine is equipped with a BWO 910 RC control system and a versatile HSK 63F milling spindle. The linear tool magazine accommodates both tools and saw blades, complemented by an aluminum table measuring 2000 x 1000 mm. Take advantage of this opportunity to purchase the MAKA MK 7s horizontal machining center. Contact us for further information. • A-axis: ±100 degrees • C-axis: ±270 degrees • Travel paths: X-2900 mm / Y-1740 mm / Z-1050 mm / A ±100 degrees / C ±270 degrees • Table size: 2000 x 1000 mm • Aluminum plate adapter: 1200 x 980 mm, 40 x 40 mm grid, M12 threads • Tool cooling: Minimum quantity lubrication (MQL) • Tool magazine: Linear tool magazine with 5 positions for tools up to 60 mm diameter and max. 130 mm length • Saw blade holder: 1 slot for saw blades up to 175 mm diameter • The last series produced with aluminum profiles. Supply voltage: 400V / 50 Hz. Rated current: 50 A. Rated power: 18.5 kW. Operating pressure: 6 bar pneumatic pressure. Additional equipment Bljdpox D Dlcsfx Afned • MAKA safety enclosure, open at the top and with two manually operated doors at the front Dimensions: Machine depth: 6000 mm

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), A CNC 4-axis milling and drilling machine Maka for plastics, wood, and aluminum is available. Travel range X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle interface: HSK63, spindle power: 12kW, spindle speed: 24,000 rpm. Tool stations: 12, angle head positions: 3. Machine dimensions X/Y/Z: 12,000mm/5,700mm/3,200mm, control system: BWO 920. Documentation available. An on-site inspection is possible. Bsdpfxevmq Tvj Afnsld

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Max. cutting height: 100 mm, saw blade diameter: 250–400 mm, bore: 30 mm, sliding table length: 2,600 mm, motor power: 5.5 kW, length: 3,100 mm, width: 2,400 mm, height: 1,500 mm, weight: 770 kg. On-site inspection is possible. Bljdpfx Aeurwyvjfned

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 12,100 mm / 2,350 mm / 800 mm, A-axis swivel: +/-98°, Rapid traverse X/Y/Z/A: 45 / 45 / 24 / 10 m/min, Machining length: 11,000 mm, Spindle speed: 24,000 rpm, Table: 10 support traverses, 2 hydraulically swiveling workpiece stops, Control: BWO 930, Operating hours: 23,792 h, Dimensions X/Y: 18,300 mm / 6,250 mm. Includes travelling gantry design with dual-sided gantry drive, coolant spray system with minimal-quantity fine atomization. Documentation available. Blsdjtqfqxspfx Afnsd

Stanje: zelo dobro (rabljeno), Tischlänge 180 cm Wagenbreite 150 cm Tischbreite 120 cm Motor 5,5 kW Höhen- und Winkelverstellung Bjdowl Dgfepfx Afnold

Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, obratovalne ure: 52.751 h, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 975 mm, pomik osi Y: 9.100 mm, pomik po osi Z: 575 mm, dolžina obdelovanca (maks.): 8.500 mm, širina obdelovanca (maks.): 450 mm, višina obdelovanca (maks.): 225 mm, število mest v zalogovniku orodij: 32, proizvajalec krmilnikov: BWO, skupna masa: 16.600 kg, model krmilnika: CNC 920, neprekinjen delovni tlak: 6 letvica, nazivna (navidezna) moč: 12 kVA, število vreten: 1, največja hitrost vrtenja: 20.000 obr/min, vrtljajska hitrost (min.): 1.000 obr/min, MAKA AP70 5-Axis Year of manufacture: 2005 Portal weight including unit and tool changer approx. 15,000 kg Control cabinet weight approx. 1,600 kg Operating voltage 400 V / 50 Hz Operating pressure 6 bar Compressed air consumption approx. 2,000 liters/hour uncompressed Control type BWO CNC 920 Controlled axes + max. traverse paths approx.: X - 975 / Y - 9100 / Z - 575 / A - ±270° / B - ±98° Milling motor HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 slots / 160mm Machine table: 2 clamping stations with 6 support beams with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - ±270° / B - ±98° Blsdpfxov Rlpys Afnsd The machine is currently not operational. The spindle including conversion kit to newer software needs to be replaced (can be requested from Maka). The machine can be inspected under power at DE94424 Arnstorf by appointment. All information without guarantee, sale only to commercial buyers. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Stanje: rabljeno, Leto izdelave: 1992, z Centrofix-rezalno gredjo rabljeno, v dobrem stanju, malo uporabljeno Bledpoxuv Rrofx Afned izdelovalec Maka tip AH 430 leto izdelave 1992 st. stroja 9201531 GS certifikat za lesni prah motor 3,0 kW upravljalni pult zgoraj širina glajenja cca 430 mm dolžina mize vstop cca 1500 mm dolžina mize izstop cca 1200 mm nihajna zaščita mize z režami / zmanjšan hrup število nožev: 4 kosi Centro Fix-nožna gred nastavitev mize z ročnim kolesom avtomatska zavora priključek za odsesavanje D 140 mm potrebni prostor cca 2700 mm x 1200 mm x 1400 mm teža cca 800 kg Skladišče: 97447 Gerolzhofen, natovorjeno in brez embalaže Predaja v stanju kot videno, brez garancije in jamstva