Traub Tnl 26 nakup rabljenega (95)

Stanje: dober (rabljeno), Leto izdelave: 1993, - TRAUB TX 8F control system Lredjldd Iqepfx Agwsu - Spindle bore: 42 mm - Main spindle speed: 40 – 4,000 rpm - 4 cutoff slides: stroke 60 mm - 8-position turret - High-pressure pump 25 bar - Rear end machining (2-spindle) - Bar feeder (3 m) - Chip conveyor

Stanje: rabljeno, Leto izdelave: 2005, Turning diameter 275 mm Turning length 900 mm Control system TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle 25.20 kW Drive power 40% duty cycle 30.20 kW Torque at 40% / 100% duty cycle 180 / 135 Nm Spindle speeds - stepless 1 - 5,000 rpm Spindle diameter (front bearing) 110 mm C-axis 1 - 500 rpm Ledpfx Aew E Nnbegworu Tool turret No. 1 X-axis 290 mm Y-axis 165 mm Z-axis 600/950 mm B-axis 360° Rapid traverse X/Y/Z 18 / 18 / 30 m/min Feed force X/Y/Z 10 / 10 / 7 kN Tool stations 2x2 + 2x2 Number of driven tools 2x2 + 2x2 mm Tool speeds 8,000 / 2,000 rpm Drive power 25% duty cycle 5.80 kW Torque at 25% duty cycle 4x18.6 / 4x74 Nm Tool mounting TRAUB Ø60 Tool turret No.2 / No.3 / No.4 X-axis 170 mm Z-axis 600/950 mm Y-axis +/- 60 mm Rapid traverse X/Y/Z 18 / 15 / 30 m/min Feed force X/Y/Z 10 / 10 / 7 kN Tool revolver - number of stations 10 Number of driven tools 10 mm Tool speeds 1 - 6,000 rpm Drive power 25% duty cycle 5.80 kW Torque at 25% duty cycle 18.60 Nm Tool holder DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths 1,000 - 3,200 mm Bar diameter 18 - 63 mm Hexagon max. 45 mm Total power requirement 95.00 kW Machine weight approx. 16.00 t Space requirement approx. 10.00 x 3.50 x H3.00 m With TRAUB TX 8i control, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool carrier with B-axis, Extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. SMW KNCS-N 170-43 3-jaw chucks 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static toolholders 6 pcs. various driven toolholders Spare parts package

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 1 MAIN SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm Lodpfxsuhadho Agwsru - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Minimum C-axis resolution: 0.001° - Traverse paths X/Z: 370 x 250 mm LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Traverse paths X/Z: 50/100 mm - Traverse path Y: +/-20 mm - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW DRILLING UNIT - Number of driven positions: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Traverse paths X/Z: 370 x 270 mm OPPOSITE DRILLING UNIT - Number of tools: 5 - Number of driven tools: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Strokes X/Y: 73 x +/-50 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 33 kW WEIGHT AND DIMENSIONS - Required space: 3335 x 1222 mm - Machine height: 1680 mm - Machine weight: 4000 kg OPERATING HOURS - Power-on hours: 41,698 h - Operating hours: 11,346 h ACCESSORIES - Control: TRAUB TX 8i - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Bar feeder: LNS HYDROBAR EXPRESS 332 (2005)

Stanje: dober (rabljeno), Leto izdelave: 1994, TRAUB TNS 65 D / 5-Axis CNC Turning and Milling Machine Lredpfew D Df Ejx Agwou - TX8 D control unit - Complete technical specifications see photos - Year of manufacture: 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and input mistakes

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Lredpfot Hwq Djx Agwju Extra-large spindle bore, with bar feeder

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 360mm/160mm, centre distance: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10 m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Lrodswmqx Djpfx Agwju

Stanje: dober (rabljeno), Leto izdelave: 1991, max. bar diameter: 42 mm chuck diameter: 40 mm Lsdpfx Agovy Uy Hswjru diameter over cross slide: 160 mm spindle speed range: 10–5,000 rpm turret with 12 stations (non-driven) swarf conveyor FMB turbo 3000 bar feeder max. bar length: 3 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Lodpfxow Ec Alo Agwsru Chip conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm Lrodpfx Asuhadzjgwsu - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: dober (rabljeno), Leto izdelave: 1990, Manufacturer: Traub, Model TNS 60, Control system: TX8-D, Operating hours: 2,321, Serial number: 1407, Year of manufacture: 1990 Lredsw Hdwgjpfx Agwou FROM TRAINING WORKSHOP

Stanje: novo, 3 safety glass panes suitable for CNC lathe TRAUB TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Size: 660 x 480 mm Lrsdpfxsw Edq De Agwju Price: €500.00 / unit net Delivery time: immediate, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Leto izdelave: 1983, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 320 mm, turning length: 1000 mm, spindle bore: 80 mm, spindle speed: 3150 rpm, travel X/Z: 265 mm / 1000 mm. Machine dimensions (L/W/H): approx. 5500 mm / 2400 mm / 2400 mm, weight: approx. 7000 kg, control system: Traub System TX-8. Includes a set of tools, 3-jaw chuck, and bar feeder with collets. Documentation available. On-site inspection possible. Lrjdpfxowzld De Agweu

Stanje: rabljeno, AVTOMATSKI ENOVRETENSKI STRUŽNIK TB-42 za največji premer 42 mm Lsdpfxexcpi Re Agwsru

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 86.157 h, The machine was built in 1999 and underwent an 8,000-hour maintenance last year. Total machine operating hours: 86,157 h. Turret 1 is equipped with 14 stations (with Y-axis). Turret 2 is equipped with 10 stations (without Y-axis). Ljdpfowur N Tox Agworu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Traub CNC Turning Machine TNC65DGY, TX8I, year 2005, serial no. 1130 Ljdpfx Aowi I Eyjgwjru Description: Y-axis on S1, V-axis, 2x C-axis, 2x driven tool stations, 2 turrets VDI30, Hainbuch BZI65 clamping system on main and counter spindle, parts catcher, Iemca Master 880MP-E bar feeder. Condition: Very well maintained, good condition, serviced. Machine geometry checked and corrected/adjusted. The machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly covers only the spare parts, not downtime hours, labor time, or travel time. The warranty expressly does not cover parts other than those listed above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25//16455, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 1.400 obr/min, stružna dolžina: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Threading length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm MACHINE DETAILS Lredpswtq Ulefx Agwsu Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Lrodpov Scrhefx Agweu

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 Lredpfx Agewi Izhswou • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, stružna dolžina: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool post: 4 slots MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm Lrjdpswtq Ufjfx Agwju

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), A universal CNC lathe Traub is available. Swing diameter over bed/cross slide: 400mm/360mm, maximum/standard turning diameter: 360mm/320mm, maximum turning length: 1000mm, distance between centers: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14. Travel X/Z: 180mm/1000mm, feed rate: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Tailstock quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. Inspection on site is possible. Ledewrrq Espfx Agweru

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 51.400 h, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, New hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Short bar loader Breuning Approx. 114,586 operating hours Approx. 51,400 production hours Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement Ledpfxjwxc Hkj Agwjru

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), A CNC lathe is available. Swing diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, spindle speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool stations: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control system: Traub System TX-8-D. Documentation is available. An on-site inspection is possible. Lrjdpfowxfatjx Agwsu

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), A CNC lathe is available. Swing diameter over bed: 450 mm, turning length: 630 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, rapid traverse: 15 m/min, motor power: 57 kW, travel X/Z: 175 mm / 630 mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000 mm / 2200 mm / 2200 mm, weight: approx. 6,500 kg, control system: Traub System TX-8-D, operating hours: 19,465 h. Documentation available. Inspection on site is possible. Lrodpfswxfayex Agweu

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Lrjdpev Scrbsfx Agwsu

Leto izdelave: 1994, obratovalne ure: 38.274 h, Stanje: pripravljen za uporabo (rabljen), Spindle bore: 42 mm, turning diameter over cross slide/bed: 170/400 mm, spindle speed: 56–5600 rpm, control system: TX 8F. Equipped with four driven tools, various VDI30 tool holders, 15 bar high-pressure pump, and a measuring arm for tool measurement. Operating hours: 38,274 h. Baumüller drive BUH-4-55-6-002 is showing a fault message and requires servicing. On-site inspection is possible. Lrjdpfxsq A S Due Agwju