Ekscentrične stiskalnice z dvojnim stojalom nakup rabljenega (40)

Stanje: rabljeno, Technical Details: Force: 63 t Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Stroke rate: 71 - 140 strokes/min Hnjdpfx Afevt Nvpj Teg Strokes per minute (single stroke): 45 / 50 strokes/min Clearance between side frames: 355 mm Shut height: 335 mm Table (WxD): 800 x 630 mm Table opening: 400 x 130 mm Clamping plate (WxD): 616 x 85 mm Ram clamping surface (WxD): 450 x 280 mm Pin hole in ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Control cabinet dimensions (LxWxH): 0.86 x 0.30 x 1.3 m Machine dimensions approx. (LxWxH): Press: 1.42 x 1.8 x 2.6 m High-performance press with roller feed/strip system and straightener Application: Suitable for series production Equipped with servo roller feed MINI: manufacturer P/A GmbH confirmed, type SRF 220 - for strip width 220 mm - Feed rate 150 m/min - Operation via handheld unit Straightening system: - Manufacturer Wanzke, type KS 150 - Entry width max. 200 mm - 2 powered entry rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler = custom fabrication: - mechanical/manual - Max. outer coil diameter: 1,500 mm - Max. inner coil diameter: 300 mm - Width max. 200 mm Roller table: - Roller system with 9 roller tracks with 53 rollers (Ø 25x25 mm)

Stanje: rabljeno, Leto izdelave: 1997, Total pressing force: 315 t Ram stroke: 160 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 1,050 mm Hnsdpfx Asvmfzhof Tjg Clearance between uprights (L-R): 2,740 mm Clearance between uprights (side): 1,500 mm Distance between oil drip pans: 2,400 mm Table clamping surface approx.: 2,740 x 1,800 mm Ram clamping surface approx.: 2,400 x 1,700 mm Strokes per minute: 10 - 60 min-1 Power requirement: 75.5 kW Machine operating hours: 77,341 h Height above floor level approx.: 5,500 mm Dimensions LxWxH: 5,400 x 3,300 x 5,700 mm Machine weight approx.: 80 t Control: Siemens S5 Standard equipment: Hydraulic tool clamping Additional equipment: Tool changing cart

Stanje: rabljeno, skupna višina: 3.350 mm, skupna širina: 1.600 mm, skupna dolžina: 2.650 mm, Lastna teža: 9.000 kg Cena: Na zahtevo Hnsdpfxsxry Szj Af Teg - Dokumentacija na voljo: Da - CE certifikat: Ne - Širina mize: 495 mm - Dolžina mize: 650 mm - Širina drsnika: 400 mm - Dolžina drsnika: 650 mm - Minimalni hod: 10 mm - Model: ekscenter - Maksimalni hod: 90 mm - Število stebrov: 2 - Moč: 70,0 ton - Transportne dimenzije: 2650 mm x 1600 mm x 3350 mm (d x š x v) - Transportna teža [kg]: 9.000 kg - Število transportnih paketov [kos]: 4 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Pressure: 200 t Throat depth: --- mm Stroke: 250 mm Table size: 2420 x 840 mm Ram area: 1850 x 650 mm Hnsdpsgk Rfzjfx Af Tjg Installation height: 500 mm Ram adjustment: 110 mm Column gap: 1900 mm Table height: 170 mm Stroke rate: 25 - 45 strokes/min Total power requirement: 22 kW Space requirement approx.: 2550 x 2370 x 3820 mm Weight: 30 t - Pneumatic clutch - Press safety valve, Herion - Cam switchgear, Balluff - Chain breakage monitoring - Hydraulic overload protection, HYDAC - Motorized ram adjustment with digital display - Free-standing control cabinet with ABB safety control system - Separate two-hand operation console with foot switch - Side safety doors, sliding - Front safety guards using BWS - vertical + horizontal The depicted and described machine is compliant for manual loading operations. The machine can also be equipped in another variant or used as an automatic press with feed system. Equipment can be adapted according to customer requirements.

Stanje: rabljeno, Leto izdelave: 1971, Tlak 100 t Razdalja med stebri 400 mm Hod 20 - 140 mm Vpenjalna površina mize 900 x 710 mm Površina bata 560 x 450 mm Nastavitev bata 80 mm Vgradna višina 470 mm Hnsdexuv Htspfx Af Teg Število hodov 70 hodov/min Skupna potrebna moč 10,5 kW Teža stroja pribl. 9 t Dimenzije stroja D x Š x V 1,98 x 1,60 x 3,10 m

Stanje: novo, Leto izdelave: 2025, širina mize: 1.000 mm, dolžina mize: 1.400 mm, stiskalna sila: 300 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, commonly used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses deliver high stability and process reliability thanks to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton is specifically designed for stable operation in high-volume production, with emphasis on die protection and operator safety. Its monoblock frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance suited to continuous production requirements. Key Advantages - Stable operation with large dies, thanks to a 1400×1000 mm table size - Die/equipment protection ensured by hydraulic overload protection - Controlled and user-friendly operation with PLC and touchscreen - Enhanced operator safety by light curtain protection system - Minimal maintenance needs due to automatic lubrication system Applications - Punching / Cutting / Die forming applications - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted sub-table • 8-point guided ram • Adjustable stroke via single connecting rod • Balancer piston for the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed oil sump with gear unit • Dual-coil safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover in front of the table • Tooling/dies tailored to customer requirements ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-300) Hnsdpex N Sdmefx Af Teg Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 1430 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 2550 mm Press Height: 4700 mm Table Dimension: 1400×1000 mm Ram Face Size: 1400×1000 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 35,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: rabljeno, Technical Details: Press force: 20 t Ram stroke: 6 - 60 mm Hnedpfxsu Nflie Af Teg Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear inside width: 470 mm Table dimensions: 300 x 450 mm Table pass-through opening: 90 mm Ram clamping surface: 130 x 248 mm Inclination: 28° Ram bore (slot): 25 x 65 mm Table height above floor: 775 mm Required air pressure: 5.5 - 6 bar Total power requirement: 3.5 kW Machine weight approx.: 1.0 t Machine dimensions (LxWxH) approx.: 1.3 x 1.1 x 1.95 m High-performance press Centralized lubrication with monitored light curtain (Linuflex) Stroke counter (counter mechanism) Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm included

Stanje: rabljeno, Leto izdelave: 1974, Skupna tlačna sila: 600 t Hod bata: 762 mm Nastavitev bata: 406 mm Vgradna višina (hod spodaj, nastavitev zgoraj): 1322 mm Razdalja med stebri L-D: 3700 mm Stranska razdalja med stebri: 350 mm Pritrdilna površina mize pribl.: 3645 x 2140 mm Pritrdilna površina bata pribl.: 3645 x 2140 mm Sila vlečne blazine v mizi: 120 t Hod vlečne blazine: 305 mm Površina vlečne blazine: 2805 x 1260 mm Izmetalec v batu: 60 t Hod izmetalca v batu: 150 mm Višina mize nad tlemi: 650 mm Število hodov na minuto: 16 min-1 Hjdpjxq Tntjfx Af Tong Potreba po moči: 90 kW Približna teža stroja: 185 t Standardna oprema Dodatna oprema

Stanje: rabljeno, Pressure: 160 t Installation height: 600 mm Stroke: 25 - 150 mm Table area: 1500 x 900 mm Ram area: 1500 x 900 mm Ram adjustment: 100 mm Clearance between guides: 1500 mm Clearance in side stands: 400 x 200 mm Frame width: 1680 mm Machine weight: approx. 15 t Required space: approx. 2.7 x 1.8 x 4.4 m Hnedpfx Afocgqvpj Tsg 2003 Modernisation / Retrofit The following work still needs to be carried out on the machine: - New control cabinet with ABB PLC - Separate two-hand control panel with foot switch - Vogel loss lubrication system

Stanje: novo, Leto izdelave: 2025, širina mize: 1.000 mm, dolžina mize: 1.200 mm, stiskalna sila: 250 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process reliability thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-250 – H Type Eccentric Press (250 Ton) is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload safety system - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain protection - Reduced maintenance needs with automatic lubrication system Typical Applications - Punching / cutting / die forming operations - Mass production lines with automatic feeding - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake system • T-slotted auxiliary bolster plate • 8-point guided ram • Adjustable stroke on a single connecting rod • Balancer piston on ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor direction • Hydraulic overload safety system • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil tank with gear assembly • Dual-coil safety valve • CE compliant Hodpfx Afex N Sc Ao Tong ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard at table front • Custom die configurations ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Size: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 2177/03/9604014, Presskraft: 160 t Stößelhub verstellbar: 20 - 130 mm Stößelverstellung: 100 mm Einbauhöhe: 560 mm Tischaufspannfläche ca.: 1500 x 800 mm Stößelaufspannfläche ca.: 1400 x 800 mm Hubanzahl pro Minute: 20 - 60 min-1 Seitlicher Durchgang: 520 mm Höhe über Flur ca. : 3550 mm Leistungsbedarf: 48 kW Maschinengewicht ca.: 26 t Standardausstattung Steuerung SIEMENS S7 Zusatzausstattung Automatisierung PME Bandanlage bestehend aus Haspel und Vorschub / Richteinheit Haspel Tragkraft 2t Bandbreite 400 mm Banddicke 0,5 - 4,5 mm Hnjdsuqdzdspfx Af Teg Coil Außendurchmesser 1800 mm Spreizbereich 470 - 630 mm Spreizung der Haspel erfolgt hydraulisch Hydraulischer Andrückarm Elektronische Vorschub / Richteinheit Bandbreite max. 400 mm Materialdurchgang max. 410 mm Materialstärke 0,5 - 4,5 mm Bandquerschnitt 1200 mm² Anzahl der Richtwalzen 7 Stück Richtwalzendurchmesser 80 mm Anzahl der Einzugswalzen 2 Stück Lüften der Einführwalzen erfolgt pneumatisch Vorschubgeschwindigkeit 50 m / min Vorschublänge 0 - 10 m

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Hnedpstqm Dgefx Af Tsg Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: novo, Leto izdelave: 2025, širina mize: 1.000 mm, dolžina mize: 1.200 mm, stiskalna sila: 200 t, trajanje garancije: 24 meseci, hod: 200 mm, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is engineered with a focus on stable operation in high-volume production, die protection, and operator safety. Its monoblock frame, 8-gib guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suitable for continuous production environments. Key Advantages - Stable performance with large dies due to a 1200×1000 mm table size - Die and tooling protection with hydraulic overload safety - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection - Low maintenance need with automatic lubrication system Applications - Punching / cutting / die forming operations - Series production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch & brake • Additional bolted T-slotted plate • 8-gib guided ram • Adjustable stroke on single connecting rod • Balancer piston in ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • LCD touchscreen • Motor reverse movement • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety guard • Enclosed gear set in oil sump • Double-solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feed systems • Scrap ejection systems • Sliding safety cover in front of table • Custom dies to specification ✅ TECHNICAL DATA (CEHP-TB-200) Capacity: 200 Ton Table–Ram Distance: 500 mm Housing Width: 1230 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2550 mm Press Height: 4600 mm Table Dimension: 1200×1000 mm Ram Face Size: 1200×1000 mm Stroke (Fixed): 200 mm Motor Power: 30 kW Weight: 24,000 kg Hnjdsx N Sccjpfx Af Tsg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table clamping surface approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Table height above floor: 1200 mm Hjdpfx Afeuqd Tmj Tong Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standard in 2015. The press is equipped with a SIEMENS S7 control system. The coil line still uses a SIEMENS S5 control system. Additional equipment Stroke bars in the press table Automation KEMMERICH coil line consisting of: Uncoiler: load capacity: 5 t Straightening machine: roller diameter: 70 mm, strip width: 300 mm Roll feed: roller diameter: 160 mm, feed length: 0.1 – 9,999.9 mm, strip width: 30 – 350 mm, material thickness: 0.2 – 10 mm, material cross-section: 1,500 mm², feed accuracy: +/- 0.05 mm Loading station

Leto izdelave: 1986, Stanje: rabljeno, Pressing force 40 t Installation height 250 mm Stroke 8 - 50 mm Hodpfx Aecb T Twsf Tong Clamping area table (L x W) 620 x 450 mm Table height above floor 980 mm Strokes per minute 85 - 500 spm Distance between uprights 680 mm Ram adjustment 50 mm Number of T-slots 4 Ram area mm Total power requirement 8 kW Space requirement approx. 2.3 x 2.2 x 2.8 m Machine weight approx. 5.8 t - Ram with 2 connecting rods - Unidor tool monitoring system - Kaiser gripper feeder right, strip width 180 mm, feed length 150 mm, max. 2 mm - Kaiser scrap shear left - Sound-insulated enclosure - Roller-mounted eccentric shaft

Stanje: novo, Leto izdelave: 2025, širina mize: 750 mm, dolžina mize: 1.100 mm, stiskalna sila: 160 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press operated by the force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its mono-block frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance under continuous production conditions. Key Advantages - Stable and repeatable production with 1100×750 mm table dimensions - Die/equipment protection via hydraulic overload safety device - Controlled, user-friendly operation with PLC + touchscreen interface - Enhanced operator safety with light curtain - Low maintenance requirements thanks to automatic lubrication system Areas of Application Hnjdpfxjx N Sblo Af Tsg - Punching / Cutting / Die forming applications - Mass production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted supplementary plate • 8-point ram guidance • Adjustable stroke via single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control unit • Piano-style control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-160) Capacity: 160 Ton Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Dimension: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are handled by CRONOSSTECH.

Stanje: rabljeno, Leto izdelave: 1984, Total pressing force: 600 t Ram stroke: 762 mm Ram adjustment: 406 mm Shut height (stroke bottom, adjustment top): 1322 mm Clearance between uprights L-R: 3700 mm Hjdpfx Afeuqdizo Tong Table clamping surface approx.: 3350 x 2134 mm Ram clamping surface approx.: 3350 x 2134 mm Cushion force in table: 180 t Cushion stroke: 305 mm Ejector in ram: 60 t Ejector stroke in ram: 230 mm Strokes per minute: 16 min-1 Power requirement: 90 kW Machine weight approx.: 185 t Standard equipment: Pneumatic table cushion Additional equipment: Tool change cart ABB handling robot

Stanje: novo, Leto izdelave: 2025, širina mize: 750 mm, dolžina mize: 1.100 mm, stiskalna sila: 125 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, Eccentric presses are mechanical presses operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H type (straight-side) eccentric presses offer high stability and process security thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-125 – H Type Eccentric Press 125 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. The monoblock frame, 8-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure ensure dependable performance suitable for continuous production conditions. Key advantages • Stable and repeatable production with a 1100×750 mm table size • Die/equipment protection through hydraulic overload safety device • Controlled and user-friendly operation with PLC and touchscreen interface • High operator safety with a light curtain system • Low maintenance needs thanks to automatic lubrication infrastructure Application areas • Punching / cutting / die forming applications • Serial production with automatic feeding lines • High-volume production processes ✅ STANDARD FEATURES Hnedpfx Asx N R U Ref Teg • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted platen • 8-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain guard • Enclosed gear group in oil chamber • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap evacuation systems • Sliding safety cover in front of the table • Custom dies upon request ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Tons Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Dimension: 1100×750 mm Ram face size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 150204, Pressing force: 100 t Ram stroke: 300 mm Ram adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Distance between uprights L-R: 2,020 mm Hjdpfx Ajvmfznef Tong Distance between uprights lateral: 620 mm Table clamping area approx.: 2,000 x 1,000 mm Ram clamping area approx.: 2,000 x 900 mm Pass-through opening in table: 1,700 x 300 mm Strokes per minute: 10 - 50 min⁻¹ Table height above floor: 1,200 mm Power requirement: 39 kW Height above floor approx.: 4,400 mm Dimensions LxWxH: 5,166 x 2,500 x 4,400 mm Machine weight approx.: 38 t Standard features Electric overload protection SIEMENS S7 control Two-hand operation Optional equipment Automation Schleicher straightening machine (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6t) Helmerding feeder (600 mm, 0.6 - 6.0 mm)

Stanje: novo, Leto izdelave: 2025, širina mize: 1.200 mm, dolžina mize: 2.200 mm, stiskalna sila: 600 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames, making them ideal for applications requiring large tables and heavy dies. The CRONOSSTECH CEHP 600 – H-Type Eccentric Press 600 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. It delivers reliable performance for continuous production with a monoblock frame, 8-point slide guidance system, hydraulic overload protection, and automatic lubrication infrastructure. Key advantages: - Stable operation with large dies thanks to a 2200×1200 mm table - Die/equipment protection with hydraulic overload safeguard - Precision guidance with 8-point slide + counterbalance piston - User-friendly and controlled operation via PLC + touch screen - High operator safety with light curtain protection Applications: - Punching/cutting/forming processes requiring large bolsters - Serial production with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing workflows ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted bolster extension plate • 8-point slide guidance • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD interface • Motorized reverse stroke • Hydraulic overload safety system • Motorized slide adjustment mechanism • Light curtain safety barrier Hjdpfx Asx N R A Uef Tong • Enclosed lubricated gear set • Double solenoid safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety door in front of the table • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table-Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram face size: 2200×1200 mm Fixed Stroke: 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Stanje: rabljeno, Leto izdelave: 1974, Skupna stiskalna sila: 500 t Hod bata: 500 mm Nastavitev bata: 500 mm Hjdpfx Afexq Tn He Tsng Vgradna višina (hod spodaj, nastavitev zgoraj): 980 mm Razdalja med stojali L-D: 2900 mm Mizna vpenjalna površina cca: 2800 x 1800 mm Batalna vpenjalna površina cca: 2800 x 1800 mm Sila natezne blazine v mizi: 100 t Hod natezne blazine: 180 mm Površina natezne blazine: Višina mize nad tlemi: 615 mm Število hodov na minuto: 15 / 30 min-1 Potrebna moč: 90 kW Približna teža stroja: 160 t Standardna oprema Dodatna oprema

Stanje: novo, Leto izdelave: 2025, širina mize: 1.200 mm, dolžina mize: 2.200 mm, stiskalna sila: 500 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety in large bolster and heavy die applications, thanks to their rigid frame designs. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point ram guidance system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable operation under continuous production conditions. Highlighted Advantages - Stable operation for large dies with a 2200×1200 mm bolster - Die/equipment protection with hydraulic overload safety system - Precision guidance through 8-point guided ram and balancer piston - Controlled, user-friendly operation via PLC and touchscreen - Advanced operator safety with light curtain protection system Areas of Application - Punching, cutting, and forming operations requiring large bolsters - Mass production integrated with automatic feeding lines - Heavy-duty die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse rotation motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard for bolster front • Custom dies per requirements ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg Hodpfx Aox N R Ahjf Tong ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.200 mm, dolžina mize: 2.000 mm, stiskalna sila: 400 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, primarily used for cold forming operations such as punching, cutting, and forming by dies. H type (straight-side) eccentric presses provide high stability and process safety in applications that require large tables and heavy dies, thanks to their rigid frame construction. CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton, is specifically designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock frame, 8-point guided ram system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key advantages: - Large 2000×1200 mm table size for stable performance with large dies - Hydraulic overload safety for die/equipment protection - Precise guidance with 8-point guided ram & balancer piston - PLC + touchscreen for controlled and user-friendly operation - Light curtain safety system for high operator safety Application areas: - Punching/cutting/forming processes requiring a large table - High-volume production with automated feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel frame construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Ram with balancer piston • Fully automatic thin oil lubrication system Hnjdpfx Aex N Rzwof Tjg • PLC control system • Piano-type control panel • Touchscreen LCD • Motor reverse motion • Hydraulic overload safety • Motorized ram adjustment system • Light curtain safety system • Gear unit in closed oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Dies with customized features ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–ram distance: 500 mm Housing width: 2130 mm Ram adjustment: 120 mm Press width: 3050 mm Press depth: 3200 mm Press height: 4700 mm Table size: 2000×1200 mm Ram face size: 2000×1200 mm Stroke (fixed): 200 mm Motor power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / DELIVERY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.200 mm, dolžina mize: 2.000 mm, stiskalna sila: 300 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, Eccentric presses are a type of mechanical press driven by an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses ensure high stability and process safety in large table and heavy die applications, thanks to their rigid frame construction. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press 300 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. With its monoblock frame, 8-guided slide system, hydraulic overload safety device, and automated lubrication infrastructure, it provides reliable performance suitable for continuous production conditions. Key advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-guided slide + counterbalance piston Hnodpfxjx N Rxvs Af Tsg - Controlled and user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application areas: - Punching/cutting/forming applications requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted bolstering plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston in slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain protection • Gear system in closed oil reservoir • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard at table front • Dies manufactured to desired specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2750 mm Press Height: 4700 mm Table Dimensions: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, širina mize: 1.100 mm, dolžina mize: 2.000 mm, stiskalna sila: 250 t, trajanje garancije: 24 meseci, hod: 200 mm, Oprema: varnostna svetlobna zapora, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism and is used for cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monoblock body, eight-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1100 mm table size - Die/equipment protection with hydraulic overload protection - Precise guidance via 8 guided ram + balancer piston - Controlled and user-friendly operation thanks to PLC + touchscreen - Enhanced operator safety with light curtain protective barrier Fields of Application - Punching/cutting/forming applications that require a large table - Mass production with automated feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel welded frame • Pneumatic clutch-brake • Additional T-slotted mounting plate • Eight-guided ram • Adjustable stroke on the single connecting rod • Balancer piston in the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety barriers • Gear set in closed oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material ejection systems • Sliding safety guard in front of the table • Dies produced to customer specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE Hjdox N Rwrepfx Af Teng This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.