Monoblock nakup rabljenega (258)

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Lasdpecr S Ecofx Ahuec Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: rabljeno, Leto izdelave: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for filling and capping glass bottles in beverage bottling plants. The machine is equipped with 60 filling valves and 12 capping heads, and is rated for an output of approximately 15,000 bottles per hour. The machine has been observed in operation with a current output of around 14,990 bottles per hour. It is set up for 0.75-litre and 0.33-litre glass bottles. The capping unit is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is housed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data Manufacturer: Krones AG Machine type: Filling and capping monoblock Model / Designation: Krones Modulfill Year of manufacture: 2012 Application: Filling and capping glass bottles Configured for bottle sizes: 0.75 l (Ø 75 mm x 265 mm) and 0.33 l (Ø 65 mm x 175 mm) Filling system: Volumetric filling Number of filling valves: 60 Number of capping heads: 12 Closure type used: Plastic screw cap Rated capacity: approx. 15,000 bottles/hour Operating hours: 41,381 h Production counter: 40,754 h Control interface: Krones iPanel CD Power supply: 400 / 230 V Current type: AC 3/N/PE Frequency: 50 Hz Rated current: 36 A Construction: Stainless steel and glass safety enclosure Condition: Used, observed in an operational production environment Laedpszcga Usfx Ahujc

Stanje: dober (rabljeno), Koda: 0382 Znamka: ALBERTI Model: BASIC PLUS CN - CE standard CNC obdelovalni center za pohištvo in okovje – CE standard Vrhunski vertikalni "točka-do-točka" vrtalni stroj s kontinuiranim podajanjem, z avtomatskim vpenjanjem in vzdolžnim premikanjem plošč ter monolitno konstrukcijo iz elektrovarjenega jekla. Avtomatsko neodvisno upravljanje treh osi z optimiziranimi cikli vrtanja in vstavitve. Dimenzije obdelovanca (plošče): Maks. 3000 x 1200 x 60 mm Min. 300 x 110 x 15 mm (avtomatsko podajanje/izvzemanje) Min. 300 x 110 x 8 mm (ročni vnos/izvzem) Monoblok konfiguracija z neodvisnimi vreteni: - 16 neodvisnih vertikalnih vreten, razmak 32 mm, vzdolž Y-osi (sestavljanje) - 3 horizontalne vrtalne glave z dvojnim izhodom v smeri X, razmak 32 mm in vertikalni pritiskač, nameščeno ob strani monobloka - 10 neodvisnih vertikalnih vreten, razmak 32 mm, razporejenih vzdolž X-osi (okovje) - 1 horizontalna vrtalna glava z dvojnim izhodom v smeri Y in vertikalnim pritiskačem Konfiguracija delovne mize: - Dovajalna sekcija z ravnimi valji, prevlečenimi s PVC - Uporabna dolžina za podporo plošče: 2000 mm - Uporabna širina za podporo plošče: 840 mm - Referenčna površina v notranjosti stroja z brušenimi prostovrtečimi valji, prevlečenimi s PVC, uporabna širina za podporo plošče: 1000 mm - Višina delovne površine: 920 mm, nastavljiva +/- 30 mm - Odtokovna sekcija z ravnimi PVC valji - Uporabna dolžina za podporo plošče: 2000 mm - Uporabna širina za podporo plošče: 840 mm - Vodilna letev z avtomatskim pozicioniranjem Ljdpey R U Abofx Ahueac - Vertikalne sponke na vodilni letvi, avtomatska nastavitev glede na debelino obdelovanca prek pnevmatskih cilindrov - Vakuumska črpalka 40 m³ Rezkalna enota "električno vreteno" 9 Hp Orodje HSK-63F za sistem avtomatske/ročne menjave orodja. Izbira hitrosti preko programa (12.000/18.000 vrt/min) – Zmogljivost rezkanja v smereh X in Y, linearno ali interpolirano, glede na tehnične omejitve stroja. Možnost vrtenja v desno ali levo. Največji premer orodja Ø 40 mm – 1x HSK-63F vretensko držalo vključeno. Avtomatski menjalec orodja Opremljen s 4 mesti za avtomatski prevzem orodij z najvišjim premerom 40 mm. Vključuje komplet 4 držal za konus ISO 30. Združljiv z rezkalno enoto – 1x HSK-63 konus vključen. Enota za krožno žago: Neodvisen motor z močjo 1,8 Hp, hitrost 12.000 vrt/min, omogoča rezanje utorov v X in Y smereh v okviru tehničnih zmožnosti stroja. Namestitev orodja z objemko, največji premer izvrtine Ø 120 mm, največja debelina 8 mm. Krmilna konzola in numerična krmilna enota ALBNT (TPA): operacijski sistem Windows XP – programska oprema ALBATROS TPA Vgrajena moč: 12 kW Stisnjen zrak: 6/7 bar Odsesavanje: hitrost 30 m/s – Pretok 8686 m³/h Skupne dimenzije: glej priloženi list Teža: 3.500 kg

Stanje: rabljeno, moč: 48 kW (65,26 KM), Leto izdelave: 2022, obratovalne ure: 868 h, Drive: Crawler Unladen weight: 8,920 kg Please contact Emal Jaweed for further information. Mini excavator, Bobcat E88, Year of Construction: 2022, Operating Hours: 868 h, Engine: Bobcat D 2.4 Stage V, Engine Power: 48.5 kW, Length: 6,165 mm, Width: 2,300 mm, Height: 2,640 mm, Operating weight: 8,920 kg, EasyDrive (hydrostatic travel drive), Monoblock boom, Hammer piping, Quick coupler MS 08, Fuel pump, Air conditioning, Video available, Swiveling ditch cleaning bucket: 1,800 mm, Rear view camera, Maximum digging depth: 4,609 mm, Maximum reach: 7,165 mm Other information: * We are offering over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for printing & typographical errors * Subject to prior sale and errors. Lodoy Nmq Uopfx Ahuoac * Trade-in possible! * The purchase of vehicles/used equipment is subject exclusively to the general terms and conditions (GTCs) of Jaweed GmbH. * For further information and our GTCs, please visit our website. We are selling our goods with general terms and conditions (see: ... / GTCs).

Stanje: rabljeno, številka stroja/vozila: LC596, Used Complete Still Wine Line - 5000 BPH Technical Specifications & Performance Data Ljdsyhbhqopfx Ahuoac This used bottling line is configured for handling glass bottles and covers a comprehensive sequence from filtration to cartoning and palletizing. It is a pre-owned solution developed for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration includes rinsing, filling, closing (flush corking and aluminum caps), capsule application (heat-shrink and polylaminate), pressure-sensitive labeling, and end-of-line packaging. Container Type: Glass bottles Core Monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (Rinser–Filler–Capper) Filtration: Seitz Orion plate filtration group Bottle Preparation: SICK Blancamat 8 bottle washer (pre-labeling) Capsule Application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate) Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labeler Conveying/Accumulation: MBF accumulation table (conveyor belt) Case Handling (Options Set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider-inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizer Case Handling (Options Set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider-inserter Ancillary Equipment: PREO E0P051 4R2 hot melt units, Ber PDC 30 carton scale Selected Component Years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30) Certifications: CE markings on Mas Pack modules Advanced Automation & Control Systems The line integrates automated capsule application, multi-station pressure-sensitive labeling as well as end-of-line case forming, gluing, and packaging. Modules are equipped with integrated safety circuits and CE-compliant controls. Hot melt application is carried out by PREO melters for reliable case sealing. Fast adjustments at labeling stations and during changeover allow for efficient shifts within the glass bottle families. - Multi-station pressure-sensitive labeling - Automated capsule application - Hot melt application via PREO E0P051 4R2 units - CE conformity of Mas Pack equipment - Operator-friendly HMI/controls at each packaging module Production Line Integration Designed for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyor accumulation table supports buffer management for a consistent flow between wet and dry areas.

Stanje: rabljeno, Gebrauchte komplette Abfülllinie für Wein sofort verfügbar: Diese gebrauchte Abfülllinie besteht aus gebrauchten Ausrüstungen und ist hauptsächlich für Stillwein geeignet. Die gebrauchte komplette Abfülllinie verfügt über einen isobarischen Monoblock, mit dem sowohl leicht perlende als auch Schaumweine abgefüllt werden können. Aktuell wird die Linie überwiegend für stillen Wein verwendet, jedoch auch gelegentlich für die Produktion von Schaumwein. Als Verschluss kommt hierbei ein klassischer Aluminium-Schraubverschluss zum Einsatz. Die gebrauchte komplette Abfülllinie für Wein arbeitet vollautomatisch vom Depalettierer bis zum Palettierer. Die Verpackung der Linie erfolgt über drei separate Maschinen zum Formen, Verpacken und Verschließen der "American Box" (amerikanische Faltschachtel). Im momentanen Betrieb der gebrauchten Abfülllinie sind drei Bediener erforderlich, zuzüglich einer Aushilfe für den Gabelstapler beim Be- und Entladen. Zusätzlich wird auch diverses gebrauchtes Zubehör für die Weinabfüllung mitgeliefert. Die Linie ist für 0,75-Liter-Bordeauxflaschen ausgelegt. Zur Reinigung der gebrauchten Linie wird Einwegdampf eingesetzt, der eine effektive Innen- und Hahnreinigung sicherstellt. Dienstleistungen für die gebrauchte Weinabfülllinie: Lodjvguphepfx Ahujac Für diese komplette Wein-Abfülllinie bieten wir Demontage- und Verpackungsservice sowie auf Wunsch Wiederaufbau am Zielort. Gern erstellen wir auch ein Projekt für zusätzliche Formatteile für neue Flaschenformen. Ein Wartungsservice für diese komplette Abfülllinie kann vereinbart und innerhalb von ca. 75 Werktagen ab Auftragseingang umgesetzt werden. Alle ersetzten Teile sind garantiert, ausgenommen Filter, Sicherungen, Schmierstoffe sowie Verbrauchsmaterialien; diese unterliegen der regulären oder geplanten Wartung. Die elektrischen Komponenten können bei Stromstößen im Schaltschrank oder durch Unterbrechung der Gesamtspannung beschädigt werden. Schäden durch den Einsatz nicht originaler Ersatzteile. Die gebrauchte komplette Abfülllinie für Wein ist freibleibend und Zwischenverkauf vorbehalten.

Stanje: rabljeno, obratovalne ure: 52.428 h, Uporabljena linija za polnjenje penečih pijač do 9000 steklenic na uro Uporabljena linija za polnjenje penečih pijač s kapaciteto do 9000 steklenic na uro je zasnovana za učinkovito proizvodnjo negazirane in gazirane vode ter brezalkoholnih pijač v PET embalaži. Linijo sestavljajo medsebojno povezani stroji, ki zagotavljajo neprekinjen in učinkovit potek dela. Vsak stroj v liniji deluje v izobaričnem načinu, s čimer je optimirano polnjenje gaziranih napitkov. Sistem tako dosega proizvodnjo do 9000 steklenic na uro ter predstavlja zmogljivo rešitev za podjetja z visokimi izpusti. Vrste embalaže in izdelkov — linija za peneče pijače Sistem je posebej zasnovan za polnjenje PET embalaže, ki je trpežna in lahka ter zato idealna za gazirane in negazirane pijače. Linija je specializirana za obdelavo gazirane in negazirane vode ter drugih brezalkoholnih napitkov. Z uporabo izobarične tehnologije se med procesom polnjenja učinkovito ohranja ogljikov dioksid, kar zagotavlja obstojnost pijače in izboljšuje okus. Stroj za pihanje PET steklenic – SMI EBS 2016 Stroj za pihanje PET plastenk SMI EBS, model 2016, omogoča proizvodnjo PET embalaže neposredno na lokaciji. Predforme se v stroju oblikujejo v plastenke, kar zagotavlja enakomerno velikost in trdnost embalaže. S tem integriranim sistemom za pihanje se izboljša učinkovitost, saj je odvisnost od zunanjih dobav embalaže minimalna, kakovost proizvodnje pa konstantna v okviru linije CFT za peneče pijače. Polnilni monoblok – CFT Master EW 32/32/8 2012 Polnilni monoblok CFT Master EW 32/32/8 iz leta 2012 je osrednji stroj v liniji za polnjenje penečih pijač do 9000 steklenic na uro. Združuje izpiranje, polnjenje in zapiranje v eni kompaktni enoti. Sistem uporablja izobarično polnjenje, ki ohranja enakomeren pritisk v embalaži, kar je posebej pomembno za gazirane napitke. Ta pristop zmanjšuje odpad in optimalno ščiti kakovost izdelka. Laodpsvgvbrofx Ahuec Etiketirni stroj – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 Etiketirka P.E. Labellers Universal M/S 15T/960/3S – 4E iz leta 2009 omogoča precizno nanašanje etiket na PET embalažo. Etiketiranje omogoča identifikacijo izdelka in skladnost s predpisi. Ta model zagotavlja fleksibilnost in natančnost, še posebej pri različnih oblikah in velikostih embalaže za linijo CFT za peneče pijače. Stroj za rokave (sleevering) – Nortan NORTAN 50 2008 Stroj Nortan NORTAN 50 iz leta 2008 za linijo CFT za peneče pijače namešča zaščitne rokave na embalažo, kar izboljšuje vizualno privlačnost in varuje izdelek pred kontaminacijo. Ta postopek je ključnega pomena za napitke, ki se skladiščijo oziroma transportirajo daljši čas. Uporabljena linija za polnjenje penečih pijač do 9000 steklenic na uro tako z dodatkom te funkcionalnosti izboljša vzdržljivost izdelkov na prodajnih policah.

Stanje: rabljeno, Uporabljena polnilna linija za penina PROCOMAC do 6000 steklenic/uro Stanje in kapaciteta Polnilna linija dosega zmogljivost do 6000 steklenic na uro (BPH) in predstavlja učinkovito rešitev za podjetja, ki želijo optimizirati svoje postopke stekleničenja. Trenutno je v skladišču; linija omogoča prilagodljivo obdelavo različnih formatov steklenih posod, in sicer 0,375 L, 0,75 L ter 1,5 L, primerna tako za penine kot tudi za mirna vina. Izobarična tehnologija polnjenja zagotavlja obstojnost in celovitost izdelka skozi celoten proces. Ključne komponente uporabljene polnilne linije za penino PROCOMAC do 9000 steklenic/uro Sistem vključuje več ključnih strojev. Na začetku poskrbi TMG depaletizator, model VEGA 60 iz leta 2004, za ravnanje s praznimi steklenicami. Nato sledi Procomac monoblok polnilni stroj, model 56 8 8 141 iz leta 2004, ki združuje faze polnjenja v kompaktni rešitvi. Bertolaso pokrovčni stroj, model EMN 550/350 iz leta 1995, pa zagotavlja, da je vsaka steklenica pravilno zatesnjena. Čiščenje in vzdrževanje Za ohranjanje kakovosti in higiene je pomemben Procomac CIP (Cleaning-In-Place) sistem, model 92.003.657 iz leta 2004, ki omogoča učinkovito in avtomatsko čiščenje opreme brez razstavljanja. Ta funkcionalnost je ključna za dolgo življenjsko dobo in zanesljivost polnilne linije. Avtomatizacija in etiketiranje Ljdpfx Ajvgt I Aohujac Avtomatizacija ima ključno vlogo pri učinkovitosti linije. Transportni trakovi premikajo steklenice od depaletizatorja do izhoda tribloka, kar zagotavlja neprekinjen potek dela. Nato stroj za etiketiranje Kosme, model EXTRA ADHESIVE 720 12T S3 E3 CE iz leta 2006, natančno prilepi etikete in tako poskrbi za profesionalno in dosledno predstavitev končnega izdelka. Pakiranje Končno pakiranje upravljajo stroji TMG: sestavljalec kartonov ORION iz leta 2008 pripravi kartonske zaboje, TM90S lepilni stroj iz leta 2004 pa zalepi in zapre zaboje, ki so pripravljeni za distribucijo. Ta koraka zagotavljata ustrezno zaščito izdelka med transportom. Zmogljivost uporabljene polnilne linije za penino PROCOMAC do 9000 steklenic/uro Linija nudi raznovrstnost v zmogljivosti: nazivna hitrost je 6.000 steklenic/uro za penino v 0,75 L steklenicah in 9.000 steklenic/uro za mirno vino v enakem formatu. Ta prilagodljivost dokazuje, da je uporabljena linija PROCOMAC optimalna rešitev za različne potrebe vinskih kleti.

Stanje: rabljeno, obratovalne ure: 1.800 h, Rabljena linija za punjenje boca za šampanjac, pjenušava i mirna vina, 4000 boca na sat Kompatibilnost s proizvodima i tehnologija punjenja Ova linija za punjenje omogućuje učinkovitu obradu mirnih vina, pjenušavih vina i šampanjca. Dizajnirana je isključivo za staklene boce i koristi izobarični sustav punjenja, koji osigurava preciznu kontrolu kod punjenja tekućina pod tlakom, poput pjenušavih proizvoda. Zahvaljujući tome, vinarije koje proizvode više vrsta vina različitih fizikalnih i kemijskih svojstava mogu se pouzdati u dosljedan i prilagodljiv rad linije, bez kompromisa u kvaliteti proizvoda. Izlazna učinkovitost prema formatu boce Lasdpfewgw Dgox Ahuoc Ovisno o formatu boce, linija ostvaruje različite kapacitete. Za boce od 0,20 l i 0,375 l postiže do 4.500 boca na sat. Za boce od 0,75 l kapacitet je 4.000 boca na sat, dok za boce od 1,5 l iznosi 2.000 boca na sat. Ova proizvodna brzina posebno je pogodna za vinarije srednjeg kapaciteta koje zahtijevaju fleksibilnost uz industrijsku učinkovitost. Pustanje u rad, radne sati i odmah raspoloživo Linija je instalirana 2022. godine i od tada je radila 1.800 sati, s proizvodnjom od približno 2.400.000 boca. Sustav je još uvijek u pogonu, što jamči dobro funkcionalno stanje. Dodatno, brzina isporuke predstavlja veliku prednost za vinarije kojima je potrebna brza implementacija, bez značajnih zastoja pri integraciji opreme. Glavni blok za punjenje: depaletizacija, ispiranje, punjenje i zatvaranje boca Proces započinje depaletizatorom Duetti Packaging, model M, koji automatizirano unosi prazne boce u sustav. Slijedi monoblok GAI, model 4033RES-HP-A01, koji objedinjuje ispiranje, punjenje i zatvaranje boca u jednom integriranom uređaju. Dvostupanjski ispirač (voda + plin) koristi 16 hvataljki za sanitaciju boca. Izobarično punjenje provodi elektropneumatski punjač pod visokim tlakom s 24 ventila. Rotaciona glava za zatvaranje s 3 pozicije omogućuje zatvaranje cilindričnim i šampanjskim (gljivastim) čepovima, plastičnim zatvaračima te aluminijskim navojnim čepovima. Uz to, monoblok ima multifunkcionalne puževe, motorizirano podešavanje vodilica, lažne boce za internu sterilizaciju ispirača te komplet elektromagnetskih ventila za izmjenu između dovoda plina i sredstva za čišćenje. Cjelokupna konfiguracija omogućuje visoku preciznost, minimalno vrijeme preinake i izvrsno rukovanje bocama. CIP i kontrola kvalitete: sustavi čišćenja i inspekcije Za održavanje higijene koristi se CIP jedinica WIN&TECH, model Win&Guard C 23.05, koja omogućuje automatsko čišćenje putem izmjenjivača topline za paru i vodu te trostupanjske filtracije preko dva neovisna kruga. Sustav također omogućava sanitarno održavanje internog mehanizma između proizvodnih ciklusa, bez potrebe za demontažom. Istodobno, inspekcijska jedinica CMP, model CV-MUF108, kontinuirano nadzire kvalitetu proizvodnje.

Stanje: rabljeno, obratovalne ure: 3.000 h, Rabljena popolna izobarometrijska polnilna linija za CSD 6400 steklenic/uro Tehnični pregled linije Ta rabljena popolna izobarometrijska polnilna linija za CSD s kapaciteto 6400 steklenic na uro proizvaja gazirane brezalkoholne pijače. Linija je zasnovana za polnjenje PET-posod prostornine 0,5 litra z izobarometričnim polnilnim sistemom, ki ohranja konstanten notranji tlak med procesom polnjenja. S tem se prepreči izguba ogljikovega dioksida in zagotovi, da izdelek od tanka do zamaška ohrani kakovost in karbonizacijo. Združljivost posod in specifikacije Linija podpira PET-steklenice z vratovi tipa 18-10 in 18-81 PCO, ki sta standardna formata v industriji pijač. To pomeni, da se sistem lahko integrira v obstoječe linije brez sprememb na končnem kapperju. Takšna združljivost zagotavlja lažjo nabavo steklenic in prilagodljivost pri embalaži, hkrati pa omogoča nemoten in učinkovit prehod med posameznimi serijami proizvodnje. Laodpfxswahdqs Ahusc Delovne ure in stanje linije Naprave v tej rabljeni popolni izobarometrijski polnilni liniji za CSD 6400 steklenic/uro imajo za sabo le 3000 obratovalnih ur. V primerjavi s podobnimi rabljenimi sistemi je to zelo nizka uporaba, kar pomeni minimalno obrabo mehanskih delov. Zato je pričakovati odlično delovanje ob nizkih stroških vzdrževanja. Zaradi teh lastnosti je linija primerna za uporabnike, ki potrebujejo takojšnjo uporabo s kratkimi časovnimi zamiki. Sestava linije Proces se začne s strojom za pihanje PET-plastenk Sidel SBO4 COMPACT, letnik 2006, ki oblikuje steklenice neposredno iz preform. Nato se v mešalcu Simonazzi-Sidel Starblend, letnik 2007, pod pritiskom premeša voda, sirup in ogljikov dioksid. Sledi enota Simonazzi-Sidel Bluestar, prav tako letnik 2007, ki vključuje 32 griberjev, 32 izobarometrijskih polnilnih ventilov ter 8 glav za zapiranje. Ta konfiguracija omogoča hitro in zanesljivo polnjenje ter zapiranje steklenic ob ohranjanju kakovosti pijače. Postavitev strojev omogoča optimalno avtomatizacijo in dostop operaterjev. Vsak modul je povezan z vnaprej usklajenimi vmesniki, kar poenostavi montažo in skrajša čas zagona. Vse te lastnosti skupaj zagotavljajo visoko proizvodno učinkovitost in preprosto vzdrževanje. Kontrola kakovosti in zaključek Za zagotavljanje kakovosti embalaže linija vključuje kontrolno enoto Heuft, ki pregleduje vratove in zamaške steklenic. Po kontroli grejo steklenice skozi etiketirko Sidel RollQUATTRO F15 (2007), ki z visoko hitrostjo in natančnostjo nanese ovijalne etikete. Nato paker Cermex CP 18 AAE (2006) steklenice združi v večpakete s pomočjo skrčne folije. Skozi celoten proces transportni trakovi Sidel prenašajo steklenice med postajami, ne da bi povzročali trenja ali mehanske zamude.

Stanje: rabljeno, številka stroja/vozila: LC426, Used KRONES bottling line for glass bottles up to 20,000 bph (bottles per hour) Lsdpjvgvwmsfx Ahusac Introduction to the KRONES bottling line The used KRONES bottling line for glass bottles is in high demand in industrial settings thanks to its reliability and efficiency. Comprising a series of premium components, the complete KRONES bottling line ensures smooth operation and effectively meets the rigorous demands of high-volume production. Main Components At the forefront is the KRONES K-131-669 filling monoblock, built in 2016, which forms the core of the entire line. With an impressive output of 20,000 bottles per hour, it is complemented by the KRONES 472-072 depalletizer from 1998 and the Gronemeyer RINSER 8983-400-4 from 2000. This setup enables smooth and continuous workflows from bottle unloading through to the filling process in the complete KRONES bottling line. Quality Control of the Used KRONES Bottling Line Ensuring product quality is a top priority in any bottling facility. Accordingly, the KRONES CHECKMAT inspector from 1999 plays a key role within the line. Equipped with advanced features for both fill level control and meticulous label inspection, it ensures that every product meets required standards. Additionally, the ACI TA20 2 AE bottle dryer from 2000 guarantees bottles are impeccably prepared for subsequent labelling and packaging stages while effectively eliminating moisture-related issues. Labelling and Packaging Efficient labelling and packaging are essential parts of the KRONES bottling line. The KRONES STARTMATIC K-080-669 from 1999 performs exceptionally in these areas, delivering precise label application and the capability to print directly onto glass bottles, thereby streamlining workflows and enhancing brand presentation for glass bottles up to 20,000 bph. This is further supported by the SMI SMI/7507 case packer from 1999 and the FRANPACK Type 121971214 pallet wrapper from 1997, both ensuring products are safely packaged and ready for shipment. Operational Condition and Specifications The KRONES bottling line is in excellent operating condition and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the system promises to boost operational efficiency while maintaining product quality. It is specifically designed for glass containers and mainly geared towards beer production, ensuring precise and consistent fills which result in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a solid investment for companies seeking to optimize their filling processes. With robust construction, state-of-the-art features, and proven performance, it is ready to deliver outstanding results and take production standards to the next level.

Stanje: rabljeno, Leto izdelave: 2020, Monoblok za ispiranje, punjenje i zatvaranje staklenih flaša. 1. Ispralica: Toranj za ispiranje sa 6 hvataljki za jednofazno ispiranje praznih flaša. 2. Punilica: Toranj za punjenje sa 6 elektropneumatskih ventil-ventila sa protutlakom. 3. Zatvarač: Rezervoar za zatvarače od nerdjajućeg čelika sa transportom zatvarača i glavom za zatvaranje. 4. Spoljašnja peračica flaša. Dodaci mašine: Punilica sa protutlakom sa 6 ventila za punjenje, zatvarač sa jednom glavom za zatvaranje. Kapacitet: 1100 flaša/h u odnosu na flaše od 0,33 l. Temperatura punjenja: 2 °C. Dužina: 2,20 m. Širina: 1,90 m. Visina: 2,10 m. Formati: Euro boce 0,5 l i 0,33 l; 26 mm krunski čepovi. Smer kretanja: u smeru kazaljke na satu. Upravljanje/kontrola: Schneider Electric. Osnovna konstrukcija: Monoblok; kućište od nerdjajućeg čelika na nogarama sa pleksiglas vratima. Oprema: ispralica sa 6 hvataljki, punilica sa 6 ventila za punjenje, zatvarač sa jednom glavom za zatvaranje, spoljašnja peračica flaša, pumpa za pivo, slobodan transport flaša. Ljdpfew Tbgdox Ahuoac

Stanje: rabljeno, Glass bottle filling line, consisting of the following components: 1. Bottle cleaning machine (standalone, Silmo, 1982) with a nominal capacity of 2,880 bottles per hour 2. Rinsing, filling, capping, and labeling line (IC Filling Systems, 2020) with: - Bottle infeed table - Rinser - Counterpressure filler - Capper - Bottle exterior washer - Cold glue labeller - Bottle outfeed table - Free bottle conveyor Machine (additional): Rinsing, filling, capping, and labeling line with separate bottle cleaning Laedpfx Asw Ta Ndehuec Output approx.: 1,100 bottles/hour (based on 0.33 l bottles) Length: approx. 7 m Width: approx. 4 m Formats: Euro 0.5 l and 0.33 l; crown corks; wrap-around and Bauche labels Direction of operation: Clockwise Basic design: Rinser, filler and capper in monoblock Equipment: Bottle cleaning machine, bottle infeed table, rinser, filler, capper, bottle exterior washer, labeller, bottle outfeed table, beer pump

Stanje: rabljeno, prevoženi kilometri: 1.001 km, moč: 16 kW (21,75 KM), vrsta prenosa: drugo, barva: modra, lastna masa: 1.380 kg, prva registracija: 01/1953, Leto izdelave: 1953, voznikova kabina: drugo, Oprema: spojka prikolice, Vehicle location: Bovenden Manufacturer/Brand: Heinrich Lanz Model series: Halbdiesel Model: D 2206 Design: Monoblock construction Production period: 1952–1955 Units produced: 6,298 Own weight: 1,380 kg Length: 2,860 mm Width: 1,525–1,760 mm Lsdpfovhlkfex Ahueac Height: 1,950 mm Wheelbase: 1,770 mm Ground clearance: 460 mm Track width: front: 1,240–1,565 mm; rear: 1,200–1,550 mm Turning radius with steering brake: 2,950 mm Turning radius without steering brake: 3,550 mm Standard tyres: front: 5.50-16; rear: 8.00-36 Rated power: 16.1 kW / 22 hp Rated speed: 1,050 rpm Number of cylinders: 1 Engine displacement: 2,256 cm³ Torque rise: 1.5 % Fuel: Petrol/Diesel Cooling system: Water circulation cooling Drive type: Rear-wheel drive Transmission: 6 forward / 2 reverse gears Maximum speed: 20 km/h ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, Leto izdelave: 2025, Overview This rotary counter-pressure filling and seaming machine was manufactured in 2025 by the Italian company Framax. The Cantastic 6000-EP is designed for filling and seaming cans for beer, soft drinks, and alcoholic RTDs. The machine is currently still in operation and can be inspected upon request. Technical data Output: approx. 70 cans/min (500 ml) | approx. 100 cans/min (250 / 330 ml) Formats: 250 ml / 330 ml / 500 ml (standard, slim, and sleek cans) Application: filling and seaming of cans (beer, soft drinks, RTDs) Configuration: 10 filling valves / 2 seaming heads Filling system: counter-pressure filling Filling pressure: approx. 0.15 – 0.4 MPa Filling temperature: approx. 1 – 4°C CO₂ management: pre-cleaning and pre-gassing, oxygen reduction system Seaming system: lid size 202 (200 optional), manual lid feed Control system: Siemens S7-1200 PLC with HMI touchscreen Drive system: frequency converter (Danfoss), unified drive Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa Laodpezbhi Iofx Ahuoc - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h Dimensions: approx. 3,153 × 1,980 × 2,350 mm Weight: approx. 5,500 kg Scope of delivery Filling and seaming monoblock | Framax | Cantastic 6000-EP | Not included | Rotary counter-pressure filler with integrated seamer Control system | Siemens | S7-1200 | Not included | PLC with touchscreen HMI Drive system | Danfoss | Not included | Not included | Frequency converter Filling valve cores | Not included | Not included | Not included | 1 set Seaming rollers | Not included | Not included | Not included | 1 set (No. 1 and No. 2) Seaming chucks | Not included | Not included | Not included | 1 unit Can rim seals | Not included | Not included | Not included | 10 pieces Filling valve seals | Not included | Not included | Not included | 10 sets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 64.269 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.000 mm, dolžina mize: 2.300 mm, širina mize: 1.600 mm, največja hitrost vretena: 20.000 obr/min, skupna masa: 30.000 kg, For sale is a well-maintained Parpas Diamond Linear – C-axis (milling head): (degrees) +/- 370 Laedpfx Ahexxvp Neuec – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance from table surface to spindle nose with milling head mounted (max.): (mm) 1,220 – X and Y-axis rapid traverse: (m/min) 60 – Z-axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (IKZ): (bar) 20 – Max. spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool stations: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – Distance between T-slots: (mm) 200 – T-slot size: (mm) 22 – Max. workpiece weight: (kg/sqm) 6,000 FEATURES + Heidenhain iTNC 530 control system + Portal (gantry) design: U-shaped “monoblock” construction with a single crossbeam and stationary workpiece + Milling head (A and C-axis), A-axis with torque motor and hydraulic clamping, A-axis arranged perpendicular to C-axis + No foundation required for the machine + Glass scale measurement on linear axes X, Y, and Z + C-axis with Heidenhain angular encoder, 0.001° resolution + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and one at the rear of the table) + Internal cooling (IKZ) 20 bar + Paper filter system + Sliding roof with opening for loading and unloading

Stanje: rabljeno, številka stroja/vozila: LC608, Used glass bottle filling line for cider 32,000 BPH Technical specifications & performance data: This complete used filling line for glass bottles is designed for the production of beverages with crown cap closures and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust used solution for beverage production. Depalletizer: Kettner Pressant Universal (1N), 5 layers/min Empty bottle inspector (EBI): Krones Linatronic 731 M2, 700 bottles/min Bottle washer: CBI JetMatic, 72 heads, 670 bottles/min Filler/capper monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 heads Bottle inspector 1: Heuft Spectrum TX Bottle warmer: CBI MCC 2000 Labeling machine: Krones (Renner) Topmatic Type 071, 850 bottles/min Bottle inspector 2: Heuft Spectrum TX Shrink-wrapper (over-wrapper): SMI SK 800F, 160 packs/min Wrap around packer: SMI WP 450, 45 crates/min Crate divider: CBI Palletizer: Berchi Dinamatic PTF/2 Pallet wrapper: Robopac Helix HS 30, 30 pallets/hour Pallet coder: Logopak LOGO Conveyors + controls: CBI bottle conveyors and controls; CBI crate conveyors; CBI pallet conveyors Crate scales: John White & Son Cartomat 2 Carton coder: Videojet Excel 100 Bottle dryer/blower: Jetair Jet-2; Sonic 150 Laodpfx Ahoy Ef Tteuoc Cooler: Geoclima 2 x TMA 2A450A EC-34 Container type: Designed for glass bottle handling Line speed (filling): up to 850 bottles/min (limited by downstream configuration) Advanced automation & control systems: The line integrates central controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subassemblies support stable speeds from 160 packs/min on the shrink-wrapper to 850 bottles/min on labeling, with efficient changeovers between process steps. Safety interlocks, emergency stop switches, and protective devices around rotating and moving systems increase operator safety and ensure reliable beverage production. Coordinated conveyor logic and accumulation for smooth product flow Automated inspection (EBI and post-labeling checks) for quality assurance Controlled thermal management via bottle warmer to suppress condensation Pallet and carton coding integrated for end-of-line traceability Production line integration capabilities: This used bottling line is designed for inline operation from depalletizer to pallet wrapper, with modular stations for easy adaptation.

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it achieves up to 13,000 bottles per hour and supports scalable outputs for medium- to high-speed lines. The machine is optimized for PET containers and is suitable for a range of beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones’ engineering ensures outstanding reliability, consistent bottle quality, and smooth changeovers. Designed as a versatile component for a used bottling line or as a stand-alone blow molder, this pre-owned system delivers precise preform handling, stable heating, and efficient blow performance. It features an Alaska neck finish, an 8-cavity configuration, and a clockwise operating direction, making it a proven choice for beverage manufacturing and industrial packaging applications where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Year of Manufacture: 2004 Configuration: Rotary Maximum Speed: 13,000 bph Container Material: PET Current Bottle Format: 0.5L No. of Cavities: 8 Thread/Neck Finish: Alaska Maximum Container Height: 350 mm No. of Grippers (infeed/outfeed): 6 No. of Mandrels: 180 Operating Direction: Clockwise Operating Height: 1470 mm Power Supply: 400 V, 3-phase, 50 Hz Operating Current: 331 A Operating Pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation and Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and rapid diagnostics. The control architecture supports stable preform heating profiles, precise blow cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are built into safeguard and access points to support consistent production with minimal downtime. Lodpex H Tf Tefx Ahujac Production Line Integration Capabilities This blow molding machine can be operated as a stand-alone unit or seamlessly integrated into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Changeovers are streamlined around the 8-cavity rotary platform, while the Alaska neck finish provides compatibility with a wide range of closures and filling monoblocks throughout the beverage production process.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 245 mm, pomik po osi Z: 210 mm, moč vretenovega motorja: 7.500 W, število osi: 6, This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin-spindle turning cell with two turrets, a maximum spindle speed of 4,000 rpm, and an 8" chuck size. The machine is designed for high-volume production with automatic loading and unloading. If you are looking for a high-quality lathe, consider the AMADA Wasino JJ3 horizontal lathe we have for sale. Contact us for more information. • Axes: X1, Z1, C1, X2, Z2, C2 • Travel paths: X1/X2 245 mm; Z1/Z2 210 mm • Spindles: 2 (front twin spindle), max. speed 4,000 rpm, power 7.5 kW (option: 11 kW), high-speed spindle • Turrets: 2 × 12 stations • Chuck size: 8" (3-jaw, both spindles) • Bed: High-rigidity monoblock construction • Cutting performance: • Turning (S45C): Cutting depth 1.6 mm; feed 0.22 mm/rev; cutting speed 160 m/min • Drilling: Ø22 mm; feed 0.56 mm/rev • Thread cutting: M16 Lasdpfx Aoy Ndu Dohujc • Parting: up to 8 mm • Precision: Positioning accuracy ±2 μm; repeatability ±2 μm • Coolant/system: 290-liter tank; filtration; high-pressure coolant pump • Cell concept/capability: automatic loading/unloading; fully automated; designed for unmanned high-volume production • Driven tools: Yes, on both spindles • Condition: Good, fully operational; regularly maintained since 2008 Additional Equipment • Gantry loader with re-turning unit • Workpiece storage: 2 units (expandable to 4) • Chip conveyor • Transformer • Integrated measuring unit (optional concept) • Cleaning unit (optional concept) Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: novo, Leto izdelave: 2025, Úhlové rezanie pre jednotlivé dosky a balíky dosiek: Efektívnosť a presnosť bez kompromisov TRGSI, rovnako ako TRSI, je monoblokový systém navrhnutý na zaistenie vynikajúcej rýchlosti inštalácie a efektívneho tlmenia vibrácií. Skutočná inovácia na dosiahnutie dokonalých výsledkov v rekordnom čase! Programované rezanie pre jednotlivé dosky a balíky dosiek Fixné rozmery a prispôsobené sekvencie: Vďaka schopnosti spravovať rôzne plány rezania je ľahké nastaviť ako fixné, tak aj sekvenčné rezy, čím sa optimalizuje každý proces. Priemyselná CNC technológia: Pokročilý systém, ktorý umožňuje rýchle ukladanie rôznych plánov rezania. Až 25 rôznych rozmerov môže byť spravovaných súčasne, s naklonenými hlavami a nezávislými možnosťami pre každú konkrétnu potrebu. Prispôsobiteľné rezacie programy: Parametre práce (ako množstvo a odpad) sú ľahko nastaviteľné a môžu byť prispôsobené individuálnym preferenciám. Každý rezací plán môže byť uložený pre rýchly prístup. Rýchle načítanie programov cez USB: Rezacie programy môžu byť rýchlo načítané cez USB v niekoľkých krokoch, využívajúc súbory .txt pre rýchlu a praktickú správu. Pokročilá optimalizácia: Dve verzie rezania na maximalizáciu efektívnosti: verzia OL optimalizuje dĺžku, zatiaľ čo verzia E poskytuje úplnú optimalizáciu a minimalizuje odpad. Dynamika fungovania Rýchly a presný pohyb: Oceľový vodič s guľôčkovými ložiskami a dvojitý sklzový vozík poháňaný bezkartáčovými motormi zaručujú vynikajúcu rýchlosť a presnosť. Zvýšená odolnosť a dokonalý sklz: Posilnená konštrukcia zaručuje optimálny sklz, čo zvyšuje trvanlivosť a spoľahlivosť systému. Pneumatický posúvač: S plne chráneným a dobre viditeľným pohybom zaisťuje maximálnu kontrolu a presnosť. Dokonalé uhly a presnosť: Synchronizovaná činnosť bočného ramena pred nožom a pneumatických lisov zaručuje dokonalý rez, ako v kvalite, tak aj v uhle. Ljdsv Iqd Rjpfx Ahujac Pokročilé príslušenstvo pre nakladanie a vykladanie S dedikovaným príslušenstvom môže byť systém nastavený na manuálne alebo úplne automatizované nakladanie a vykladanie, čím sa zabezpečuje plynulý pracovný tok.

Stanje: novo, Leto izdelave: 2025, Optimizacijska žaga s potisnim sistemom TRSI – Najboljša v Evropi Če iščete inovativno, hitro in zanesljivo avtomatsko optimizacijsko žago, je TRSI prava izbira. Prilagodljiv vašim potrebam, je popolna za programirane ali optimizirane reze in se prilagodi različnim proizvodnim panogam. Popolna za različna področja: • Pakiranje – Natančno rezanje posameznih plošč ali paketov, idealno tudi za rezanje zamaškov. • Okvirji – Napredna optimizacija za izbiro kakovosti in napak, zmanjšanje odpadkov. • Pohištvo – Milimetrska natančnost za rezanje dokončanih polizdelkov z vrhunsko kakovostjo. • Talne obloge in parket Ledpfjv Iqcmjx Ahujac Tehnologija, ki naredi razliko TRSI je opremljen z naprednim programskim sistemom, ki poenostavi delo in optimizira procese: • Rezače po programu: Zaporedja fiksnih dimenzij za ponovljive in natančne operacije. • Optimizirani rezi: OL različica: Optimizacija po dolžini za zmanjšanje odpadkov. E različica: Celovita optimizacija z odpravo napak za maksimiranje donosa. • Prilagodljive prioritete optimizacije: Izberite med komercialno vrednostjo, odpadki, količino, dolžino ali mešano strategijo. • Takojšnja integracija z obstoječimi proizvodnimi sistemi, brez dodatnih vmesnikov. • Spletna tehnična podpora na voljo kadarkoli. • Intuitivni HD zaslon na dotik z uvozom podatkov prek USB-ja. • Industrijski CNC računalnik za neprekinjeno proizvodnjo. Ultra-natančno in hitro gibanje • Hitro pomikanje po jeklenih vodilih z krogličnimi ležaji in dvojnim vozičkom za gladke in natančne premike. • Brezkrtačni motorji visoke zmogljivosti za večjo hitrost in zanesljivost. • Ojačana struktura za popolno drsenje, brez vibracij in zdrsov. • Zaščitene poti z vidno pnevmatsko dvigalko za popoln nadzor v vsaki fazi rezanja. Močan in zanesljiv rezalni sklop • Trden poravnalnik s tihim pihanjem za udobnejše delovno okolje. • Pnevmatski pritisk na linearnih vodilih z krogličnimi ležaji za popoln oprijem. • Gumijasta kolesa z amortizacijo in sklopko v oljni kopeli, da zagotavljajo stabilnost in preprečijo zdrs. Oprema za maksimizacijo produktivnosti • Po meri izdelani nakladalniki za odpravo mrtvih časov in povečanje učinkovitosti. • Ročne in avtomatske tiskalnike za jasno in natančno označevanje polizdelkov. • Optimizirani razkladalni sistemi za vsak proizvodni proces. Zaupajte Cursal za proizvodnjo brez kompromisov S TRSI lahko vaše podjetje doseže nivoje učinkovitosti in natančnosti, ki jih še niste izkusili. Odkrijte opremo, nakladalnike in razkladalnike, ki bodo prilagodili vašo proizvodno linijo in optimizirali vsak proizvodni korak. Kontaktirajte nas še danes za svetovanje po meri in dvignite svojo proizvodnjo na naslednjo raven.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: TRV 2000 Ø700R, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Discover the TRV 2000 – the perfect optimizer for both planed and unplaned boards, offering exceptional precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill’s workflow! Advanced Technology for Outstanding Results The TRV 2000 is equipped with the proven CURSAL software, which also powers other optimizer series. This software is the ideal solution to accelerate the production process by optimizing logs and recovering side boards that cannot be efficiently utilized with traditional machines. It works perfectly in conjunction with the multi-blade system to ensure an efficient cycle. With a feed speed of 150 m/min (automatically limited) and a brushless motor, the TRV 2000 eliminates the risk of blockages and ensures a continuous flow, seamlessly integrating into the fastest circular saw lines. Precision Without Compromise Lajdpfx Asv Ip U Iohujc The TRV 2000 offers such high accuracy that post-processing after multi-blade cutting is not required. Thanks to its innovative technology, it is ideal for optimizing mid-sized, valuable timber, making it the perfect choice for those seeking flawless results. Excellent Design and Functionality The machine body features a reliable feed system that enables right-to-left movement via 8 profiled rollers. The pneumatic pressure wheels are specifically designed for unplaned boards, and in-line optimization within the monoblock of the saw unit allows processing of bowed and warped boards. Experience Incredible Performance Watch the video and see how the TRV 2000 can optimize your production with outstanding performance. Ideal for: - Semi-finished wood products for furniture - Packaging industry - Recovery of side boards from logs - Windows, construction, and flooring - Glulam, boards, structural timber TRV 2000: The Ultimate Solution for Modern Sawmills.

Stanje: novo, Leto izdelave: 2025, TRSI Automatic Saws: Performance, Precision and Optimization TRSI Ø600 Push-Feed Saw – 90° Cut: Perfect for Beech Sawmills The TRSI Ø600 is an automatic optimization saw with push-feed, developed for cutting beech timber with a consistent thickness and variable width. Its modular monoblock design and Ø600 blade make it ideal for precise applications. Key Features: - Programmed and Optimized Cutting: Precise, repeatable operations or optimization to reduce waste and maximize yield. TRSI Ø700 Push-Feed Saw – 90° Cut: For Beam and Packaging Cutting The TRSI Ø700 is designed for powerful cutting of beams and packaging materials. Featuring a Ø700 blade and a robust structure, it offers high productivity both in sawmills and packaging industries. Key Features: - Programmed and Optimized Cutting: Maximizes material usage while minimizing waste. TRSI: The Customizable Solution for Every Sector TRSI is the ideal automatic saw for companies seeking speed, reliability and precision. It can be customized to your needs and is perfectly suited for various production sectors. Advanced Technology: - Advanced Software: Simple programming and process optimization. - Complete Integration: Compatible with your enterprise systems. - Remote Maintenance: Technical support available at any time. Superior Performance: - Ultra-precise Motion: Fast push-feed on ball screw guides for smooth and accurate cuts. Lsdpfx Ahjv Iqddeuoac - Brushless Motors: Maximum performance and reliability. - Reinforced Structure: Guarantees flawless movement without vibrations. Accessories for Maximum Productivity: - Custom Feeders: Minimize downtime. - Manual and Automatic Printers: Clear marking of semi-finished products. - Optimized Discharge Systems: For all types of processing. Rely on Cursal for Innovation and Performance With the TRSI, you achieve maximum efficiency and precision by adapting every aspect of the machine to optimize your production flow. Contact us for tailored advice and take your production to a new level of quality.

Stanje: rabljeno, Leto izdelave: 2003, Overview This rinser-filler-capper monoblock was manufactured by Kosme in 2003. The unit is designed for filling carbonated and non-carbonated beverages into PET bottles. It consists of a rinser with 2 channels, an isobaric pressure filler, and a capper for plastic screw caps. The machine is currently available for immediate delivery. Technical Specifications - Capacity: 10,000 bottles per hour - Formats: 1.0 l PET bottles, 0.5 l PET bottles, 0.33 l PET bottles - Running direction: Clockwise Rinser Features: - 36 rinsing stations - 2-channel rinser - Stainless steel rinsing lines Filling System: - Isobaric system - 36 filling valves Capping System: - Manufacturer: Arol - 9 capping heads - 2 cap chutes, 1 for 28 mm plastic caps, 1 for sports caps Ljdpfjwiy Tvex Ahusac Dimensions (approx.): 4,100 x 3,000 x 4,000 mm Scope of Delivery - Rinser, filler, capper in triblock configuration - Vacuum barrier system - Stainless steel CIP sleeves - Cap feeding system

Stanje: rabljeno, Leto izdelave: 2011, Overview This bottling line for non-carbonated beverages in PET bottles was manufactured in 2011 and includes a filtration unit, filling and capping machine, labelling machine, and a pallet wrapper. It is designed for bottle sizes ranging from 1.5L to 5L. The equipment is being sold due to factory closure. All machines have been stored professionally and can be inspected on site. Technical details Filtration Unit | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration by housing system Automatic Filling Monoblock | GYM Internacional | Grupo 9-1.PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, Max. 300 mm Bottle height: 250–400 mm Rotation direction: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary Labelling Machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet Wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Output: 35 pallets/hour Type: turntable Control: PLC Lsdov E Haijpfx Ahuoac Max. pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm