Rezkanje Posnetkov nakup rabljenega (2.977)

Stanje: rabljeno, Boring head, spindle head, drilling head, parting-off boring head, parting-off head, spindle drilling head, boring-out head, spindle tool - Mount: SK50 - Tool holder: M20 - Price: for both holders - Weight: 16 kg Gksdsb A Hvaopfx Ah Dec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 18.179 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B151707, stružna dolžina: 620 mm, premer struženja: 190 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 345 mm, razdalja med vreteni: 970 mm, TECHNICAL SPECIFICATIONS Maximum turning diameter: 190 mm Maximum turning length: 620 mm Maximum swing diameter over bed: 190 mm Swing diameter over cross-slide: 190 mm Standard turning diameter: 170 mm Maximum distance between spindles: 970 mm Axis travels X-axis 1: 345 mm X-axis 2: 167.5 mm Y-axis: +/- 45 mm Z-axis 1: 1,240 mm Z-axis 2: 685 mm B-axis: +/- 91° Gkedpoxgpclefx Ah Djc C-axis 1+2: 360° Main spindle Maximum spindle speed: 4,500 rpm Main spindle power rating: 18.5 / 15 kW Spindle bearing diameter: 110 mm Spindle bore: 80 mm Maximum bar capacity: 65 mm Spindle nose: A2-6 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle Maximum spindle speed: 5,000 rpm Sub spindle power rating: 11 / 7.5 kW Spindle bearing diameter: 90 mm Spindle bore: 63 mm Maximum bar capacity: 51 mm Spindle nose: A2-5 Maximum chuck diameter: 165 mm C-axis: 0.001° Sub spindle travel: 760 mm Upper turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Boring bar diameter: 32 mm Indexing time: 0.2 – 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm B-axis: 182° Y-axis: 90 mm Lower turret Number of tool stations: 24 Number of driven tool stations: 12 Shank diameter: 25 mm Boring bar diameter: 32 mm Indexing time: 0.2 – 0.7 s Chip-to-chip time: 3.0 s Maximum tool diameter: 80 mm Turret live tooling drive Spindle speed at driven stations: 6,000 rpm Power rating – driven tool stations: 5.5 / 3.7 kW Number of driven tool stations: 24 Maximum shank diameter – pins: 25 mm / 32 mm Feeds Rapid traverse (X / Y / Z): 16 / 6 / 40 m/min Rapid traverse B-axis: 180°/s Rapid traverse C-axis: 600 rpm Feed rate X: max. 16,000 mm/min Feed rate Y: max. 6,000 mm/min Feed rate Z: max. 40,000 mm/min Tip feed: 0 – 1,260 mm/min Feed rate C: 1 – 4,800°/min MACHINE DETAILS Control: Fanuc 18 iTB Weight: 12,500 kg Electrical Data Frequency: 50 Hz Voltage: AC 200/220 V Maximum load: 198/180 A Main circuit breaker: 225 A Transformer rating: 68.6 kVA Control voltage: DC 24 V Total power requirement: 77 kVA Operating hours Spindle hours: 18,179 h Operating hours: 53,242 h Power-on hours: 99,999 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Gsdpfx Aexf A Edjh Dskc Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 720052, stružna dolžina: 600 mm, premer struženja: 140 mm, prehod palice: 65 mm, model krmilnika: Siemens 840 D PowerLine, razdalja med vreteni: 615 mm, DÉTAILS TECHNIQUES Diamètre de tournage : 140 mm Longueur de tournage : 600 mm Diamètre de barre max. : 65 mm Distance entre broches : 615 mm Vitesse de broche max. : 5 000 tr/min Puissance de la broche principale : 20/27 kW Nez de broche : ISO 702/1 140 mm Diamètre du palier de broche : 110 mm Couple max. : 105/145 Nm Axe C : 0,001 Diamètre de mandrin : 140 - 160 mm Tourelle porte-outils : 3 Axes Y : 2 à 3 axes +/- 35 mm Axes de correction B : 2 axes +/-1 Positions d’outils entraînés : 3 x 12 Prise d'outil : VDI 25 x 48 DIN 69880 Puissance entraînée outils : 8 kW DÉTAILS MACHINE Commande : Siemens 840 D PowerLine Gkodpfxsxg Im Ae Ah Doc Dimensions & Poids Encombrement : env. 8,0 x 3,5 x 2,5 m Poids de la machine : env. 6 500 kg Données électriques Tension nominale : 400 V AC Courant nominal : 101 A Puissance nominale : 59 kW Nombre de phases : 3 Fréquence : 50 Hz Tension de commande : 24 V DC Demande totale de puissance : 53 kVA ÉQUIPEMENT Alimentation automatique de barres Index MBL

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.520 mm, premer struženja: 540 mm, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 550 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.595 mm, največja hitrost vrtenja: 3.500 obr/min, število mest v zalogovniku orodij: 40, kot vrtenja osi B (min.): −120 °, kot vrtenja osi B (max.): 120 °, TECHNICAL DETAILS CNC Control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar capacity: 76 mm Turn-Mill Spindle X-axis travel: 555 mm Y-axis travel: ±80 mm (160 mm total) Z-axis travel: 1,595 mm B-axis indexing: ±120° (240° total) Tool system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 1.5 s Number of tools in magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous): 15 / 11 kW Lower Turret X-axis travel: 185 mm Y-axis travel: 1,640 mm Number of tool stations: 12 Max. speed of driven tools: 4,000 rpm Main Spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle nose: ASA A2-8 Spindle bore: Ø86 mm Gedpfx Ajxf Hrneh Djkc Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous): 26 / 22 kW Sub-Spindle Max. spindle speed: 3,500 rpm Sub-spindle travel: 1,565 mm Travel Distances and Rapid Traverse X1-axis travel: 555 mm X2-axis travel: 185 mm Z1-axis travel: 1,595 mm Z2-axis travel: 1,640 mm Y-axis travel: ±80 mm (160 mm total) A-axis travel: 1,565 mm C1-, C2-axis travel: 360° (0.001° increment) B-axis travel: ±120° (240° total) B-axis coupling angle: 15° X1-, Z1-, Z2-axis: 24 m/min Y-axis: 16 m/min A-axis: 24 m/min C1-, C2-axis: 200 rpm B-axis: 27 rpm MACHINE DETAILS Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - CNC control Fanuc 18iT-B - Tool system Capto C6 - Tool magazine with 40 stations - Lower turret with 12 tool stations

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 750 mm, premer struženja nad prečnim suportom: 250 mm, potovalna razdalja osi X: 140 mm, pomik osi Y: 40 mm, pomik po osi Z: 410 mm, TECHNICAL DETAILS Travel X-axis: 140 mm Travel Y-axis: +/- 40 mm Travel Z-axis (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle travel B: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Gedexgglkjpfx Ah Dskc Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2 x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret index time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6,500 x 3,000 x 2,500 mm Machine weight: approx. 5.1 t Total connected load: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, premer struženja: 500 mm, izvrtina vretena: 80 mm, pomik osi Y: 260 mm, • Fanuc 31i-B5 CNC control • 15" color LCD display • Y-axis travel: 260 mm (+/- 130 mm) • B-axis swivel range: 230° (+/- 115°) • Milling spindle drive power: 15/22 kW • Maximum milling spindle speed: 12,000 rpm • Main spindle drive power: 22/26 kW • Main spindle speed: 4,000 rpm • Spindle nose: A2-8 • Main spindle bar capacity: 80 mm • Counter spindle drive power: 15/22 kW • Counter spindle speed: 4,000 rpm • Spindle nose: A2-8 • Direct encoder feedback on X1, Y1, Z1-axis • 12-station turret • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Foot switch for chuck • Coolant system with 4 pumps • Automatic central lubrication • Automatic machine shut-off • Right-side hinge conveyor • LED work area lighting • 1 set of machine documentation • CE specification FANUC 19" HMI Touch Panel iH Pro (instead of standard 15" touch panel) Tool holder: Capto C6 Tool positions: 80 Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Bore: 81 mm • Jaw stroke (diameter): 8.8 mm • Base jaw serration: 1.5 mm x 60° • Max. speed: 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K • Bore: 81 mm • Piston stroke: 25 mm • Max. speed: 4,800 rpm SMW power chuck Hydraulic solid clamping cylinder SIN-S 125 • Max. pressure: 70 bar • Pulling force at 40 bar: 41 kN • Max. speed: 6,000 rpm Bar feeder interface incl. "Optional block skip" Three-color signal lamp Manual tool setter Integrated parts unloader for counter spindle • Max. diameter: 80 mm • Max. length: 200 mm • Max. weight: 3 kg Automatic work area door Band switch for automatic work area door 120 kVA transformer TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance system Gedpfx Ajwpkp Ieh Dokc KNOLL KF300/1800 70 bar with alpha 9-E inline cooler - Clean water tank: 1,800 l capacity - 1 x LP pump: 150 l/min / 3.1 bar - 2 x MP pumps: 40 l/min / 7 bar - 1 x HP pump: 20 l/min / 70 bar - 1 x frequency converter for HP pump - 1 x dual switching filter - 1 x alpha 9-E inline cooler - 7 pressure stages KNOLL scraper conveyor 500 K-1 Conveying height: 1,700 mm Discharge height above floor: 1,150 mm

Stanje: rabljeno, Leto izdelave: 1971, obratovalne ure: 4.348 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 462-1717, Rabljeni profilirni stroj Weinig PFA 17N, proizvajalec: Michael Weinig KG, Tauberbischofsheim (Nemčija), tip: PFA 17N, letnik 1971, serijska številka: 462-1717, 7 vreten (med drugim univerzalno vreteno), premer vretena: 40 mm, moč motorjev cca 3–5,5 kW na vreteno, maks. širina skobljanja: cca 170 mm, maks. višina skobljanja: cca 120–140 mm, podajanje nastavljivo, masa cca 3.500–4.000 kg. Stroj je rabljen in v skladu s starostjo. Gkjdpfx Ahexlacme Doc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.597 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 424 mm, premer struženja: 370 mm, Premer palice (maks.): 65 mm, premer struženja nad ležiščem sani: 370 mm, največja hitrost rezkalne vretena: 12.000 obr/min, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1 axis: 380 mm X2 axis: 155 mm Z1 axis: 460 + 155 mm Z2 axis: 610 mm y-axis: ±105 mm B-axis: ±120° Bar capacity: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding change) Spindle nose: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Front bearing spindle diameter: 100 mm Max. torque (40% DC/continuous operation): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle nose: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Gksdpexf A Apofx Ah Dsc Front bearing spindle diameter: 70 mm Max. torque (15% DC/continuous operation): 49/22 Nm Tool spindle Number of tool stations: 1 Tool shank type: C5 Front bearing spindle diameter: 65 mm Tool change time (tool to tool): 1.2 s Max. tool diameter with adjacent stations occupied: 70 mm Max. tool diameter with adjacent stations empty: 130 mm Max. tool length: 250 mm Max. tool length (over 70 mm): 210 mm Max. tool weight: 5 kg Minimum indexing of B-axis: 0.0001° Max. spindle speed: 12,000 rpm Max. torque (15% DC/continuous operation): 49/22 Nm Turret 2 Number of tool stations: 10 Max. shank diameter for boring bars: max. 32 mm Feed drives Rapid traverse speed X-axis tool spindle: 40,000 mm/min Rapid traverse speed Y-axis tool spindle: 40,000 mm/min Rapid traverse speed Z1-axis tool spindle: 50,000 mm/min Rapid traverse speed X2-axis lower turret: 30,000 mm/min Rapid traverse speed Z2-axis lower turret: 30,000 mm/min Rapid traverse speed A-axis workpiece unloading unit: 36,000 mm/min Rapid traverse speed B-axis: 100 min⁻¹ Rapid traverse speed C-axis: 250 min⁻¹ Tool magazine Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power on hours: 75,992 h Total power requirement: 45 kW Weight and dimensions Machine weight: approx. 10.5 t Space requirements: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2: Operating time: 48,382 h Machining time: 2,664 h EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll belt filter KF10/500 / high-pressure coolant through milling spindle, 7-stage, up to 70 bar Chip conveyor ConSep 2000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Glavno vreteno 7.000 min⁻¹ + os C Protipredek 7.000 min⁻¹ + os C + E Revolver za orodja 3 x 12 postaj s 30 barov visoko tlaka Gsdpexl Aq Hjfx Ah Djkc VDI 25 enojni pogon, S 6.000 min⁻¹ Osi 2 x X/Y/Z, 1 x X/Z Prehod vretena 42 mm Krmiljenje FANUC Vključno z avtomatskim podajalnikom palic LNS Hydrobar Sprint 555 Vključno s transporterjem ostružkov Knoll

Stanje: zelo dobro (rabljeno), HSS saw beveling machine PERUZZI model SAUT 550, completely overhauled and newly painted, like new Gkodohzcctopfx Ah Djc

Stanje: rabljeno, Ročni rezkalni stroj za lesene sedeže ali podobne elemente Gkjdpsqaqtvofx Ah Doc

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, širina kolesa: 800 mm, module 1-6 Gkjdpfx Aoxhck Sjh Doc diameter max 600mm digital reading Complete machine with documentation, tool holders, change gears,...

Stanje: rabljeno, Leto izdelave: 2001, Ta vodoravni CNC stružnica Gildemeister CTX-400 S2, model: CTX 400 Serija 2, je na spletnem dražbenem industrijskem dogodku / dražbi strojev podjetja za strojništvo – čiščenje parka strojev in reorganizacija. Gksdpfx Aoxlhrioh Dec

Stanje: rabljeno, Leto izdelave: 1990, Rabljeni stroj za hladno oblikovanje 20 mm Proizvajalec: Asahi-Okuma (Japonska) Leto izdelave: 1990 Model: AF-2020-5 Št. postaj: 5 Premer rezanja: maks. 20 mm (vlečna trdnost pod 70 kg/mm²) Dolžina rezanja: 210-15 mm Dolžina izstopa: Izstop na strani prebijala: maks. 52 mm Glavna matrica x globina: 115 mm premer x 250 mm Prebijalna matrica x globina: 85 mm premer x 150 mm Rezovalna matrica x globina: 80 mm premer x 80 mm Premer izmetalne matrice: 30 mm premer Premer x debelina rezalne matrice: 80 mm x 40 mm Gkodpfexlac Hex Ah Djc Medosna razdalja matric: 140 mm Hod ročice: 380 mm Dolžina transfer stopnje: 210 mm Neto premer glave: 45 mm premer Neto premer prebijala: 100 mm premer Sila: 250 ton Proizvodna zmogljivost: do 100 enot/min Glavni motor: 75 kW (6/8/12 polov) Teža stroja: 75 ton Dimenzije stroja: 9,1 x 3,45 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Premer struženja maks. 185 mm Dolžina struženja maks. 186 mm Vrtina vretena 73 mm Gsdpfx Ajxl Amnsh Dekc Maks. teža obdelovanca 30 kg Krmiljenje SIEMENS SINUMERIK 840 C Vključuje dokumentacijo Vključuje transporter ostružkov Vključuje podajalnik palic LNS Quick Load

Stanje: zelo dobro (rabljeno), Beveling machine for HSS saws Pedrielli model PGS Gkedpfx Ahoul Tylo Dsc

Stanje: rabljeno, Wigo Double-End Tenoner with 3 units per side, complete with inverters. - Circular Saw (right and left) - Spindle Moulder (right and left) - Spindle Moulder (right and left) Maximum working width: 1500 mm Motor power: Circular saws: 3 kW x 2 Gedpfeummldex Ah Djkc Spindle moulders: 5.5 kW x 2 Rotary sanders: 5.5 kW x 2 Feed motor: 4 kW Shoulder width adjustment motor: 3 kW

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840 Dsl, Description: General: Year of Manufacture: 2013 Gjdpfx Aoxl Nfqsh Dekc Control: Siemens 840 Dsl Turning length: 1,185 mm Swing diameter: 540 mm Bar capacity: 75 mm Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing Sub Spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing + through spindle cooling Tool Carrier I (X/Y/Z/B): Technology: Milling spindle on moving column Milling spindle speed: 12,000 rpm Max. power: 22 kW Tool interface: Capto C6 X-axis: 450 mm Y-axis: 200 mm Z-axis: 1,200 mm B-axis: +/- 110° Position measuring systems: Direct (glass scales) Tool Carrier II (/X/Y/Z): Technology: Tool turret on cross-slide Tool drive: Direct drive Speed: 10,000 rpm Power: 14 kW Torque: 34 Nm X-axis: 195 mm Y-axis: 80 mm Z-axis: 1,200 mm Tool interface: VDI 40 Number of tool stations: 12 pcs Automation: Technology: Gantry loader with stacking magazine Workpiece diameter: 50 – 200 mm Max. workpiece height: 230 mm Max. workpiece weight: 15 kg Number of stack adapters: 20 pcs Max. load per stack adapter: 40 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ), 80 bar Tool magazine: Chain magazine, 120 stations Workpiece measurement: Renishaw measuring probe Tool breakage monitoring: Swing wire Automation: Gantry loader with stacking magazine Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Work area door: Automatic Chucks: 2x SMW KNCS 260 Tool holders: Various Capto C6 holders

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Gkodoxm Tv Aopfx Ah Djc Z-axis: approx. 1,000 mm A-axis: ± 110° C-axis: ± 360° Control: Heidenhain TNC 640 with HR 520 handwheel Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum, with cross T-slots spaced every 250 mm Max load: 1,000 kg evenly distributed 2-Axis Milling Head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blow-off air: external Linear Axis Drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Color Enclosure, portal, control cabinet: light grey Z-slide and milling head: blue Additional Equipment - 15-position tool changer - Oriented milling spindle, e.g. for threading - Direct measuring system in all 5 axes - 2-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Condition of the Machine Fully functional, available immediately, and still powered until November 2025

Stanje: zelo dobro (rabljeno), HSS saw beveling machine EYAN Gkodpfx Ashzcd Uoh Dsc

Stanje: rabljeno, Ročni rezkalni stroj za lesene sedeže ali podobne elemente Gsdpfx Ahspk Ta Aj Dekc

Leto izdelave: 2000, Stanje: rabljeno, Horizontalna rezkalna stroj BL Snc, letnik 2000 (CE), s podajalnikom Gsdpeq Rkt Ssfx Ah Dskc

Stanje: rabljeno, Camam znamka, rezkalni stroj model FT2A Gkedpfx Asiy Ellsh Dec

Stanje: rabljeno, Special pantograph for milling baby cot legs. Godpfx Ahspwt D Ee Djkc Head movement controlled by foot pedal; workpiece movement pneumatic.