Oblikovanje in rezkanje

WEINIG EM 820 120 m/ min

Stanje: rabljeno, Število vreten: 5 kosov Delovna širina: 230 mm Višina skobljanja: 120 mm Avtomatski štiristranski skobeljni in profilirni stroj Weinig Profimat 23 E za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom. Iedpfxjx Ecgus Abxeau Vreteno 1: Spodaj / 5,5 kW / 40 mm Vreteno 2: Desno / 5,5 kW / 40 mm Vreteno 3: Levo / skupen motor z #2 / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 4 kW / 40 mm

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers Isdpfowvqklex Abxoau • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Weinig Powermat 700 Letnik: 2018 Širina skobljanja: 230 mm Višina skobljanja: 160 mm Vstopna miza: 2.500 mm Hitrost podajanja: 40 m/min Podajalni motor: 7 kW Obdelava mize: Marathon premaz (kaljeno, brez vstopne mize in posebnih plošč) Pogonski valj v mizi s širino 200 mm Sistem Memory Plus za 500 profilov Razporeditev vreten: Spodaj: 11 kW Iasdjyg Hfljpfx Abxju Desno: 7,5 kW Levo: 7,5 kW Zgoraj: 15 kW Zgoraj: 15 kW Spodaj: 11 kW Stroj je v zelo dobrem stanju

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Ijdpfx Abeu Agh Sexeau Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Iajdpfx Aopbvqvobxeu Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg

Stanje: rabljeno, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm, Width: approx. 80 – 240 mm, Finger joint length: 400 – 1,500 mm, Finished length: 2.50 m – 13.50 m stepless. Consisting of the following components: - SMB vacuum destacking unit (longitudinal) with 2 lift tables and 2 package roller conveyors, year 2013, max. package dimensions 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system; singling and feeding onto roller conveyor for scanner, board turner, diverter for too wet/too dry, diverter for B-quality, marking station or automatic mode - Bidac end-grain scanner for detecting cupping, year 2013 - Brookhuis moisture measurement FMI 5, year 2019 - Microtec scanner Goldeneye 502, year 2012, with X-ray, 4 colour cameras, and new optimization software - Dimter Opticut 350-2, year 2003 with paddle ejector (retrofit 2009) and associated sorting belts, pneumatic ejector for 2 additional qualities - NKT packaging unit - NKT finger jointing system with rotary table Special Pack AH 1050, year 2005, consisting of: milling machine, tilt station, feed track length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 manual stacking blades, infinitely adjustable stop electro/hydraulic, package width max. 1200 mm, package height max. 600 mm, hydraulic package pusher Ijdpfx Abovvi Tyexsau Location: at customer site

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Number of spindles: 4 pcs Working width: 230 mm Planing height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min Control: Memory Plus Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of wood, including infeed mechanisation Weinig High Mech E 1 and outfeed mechanisation with Sicko paternoster stacker. The machine is equipped with a Memory Plus system with electronic (radial) positioning of spindles 3 & 4 and MarathonPowerCoating PLUS on the table plates. Last service by manufacturer: December 2025. Iedpfx Abjyhfhnsxoau The plant is still in operation and can be inspected at any time. Expected availability: from September 2026. Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm

Stanje: rabljeno, številka stroja/vozila: 007649, Maks. obdelovalna širina: 600 mm Lepilni sistem: EVA Iasdsu Eviqspfx Abxsu

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) Iasdpsu Udd Sefx Abxsu 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) 6 powered rollers in the table

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, hitrost podajanja os Z: 80 m/min, skupna višina: 2.300 mm, širina folije: 250 mm, delovna višina: 900 mm, trajanje garancije: 3 meseci, Oprema: dokumentacija / priročnik, Stroj za oplemenitenje profilov ima delovno širino 250 mm. Izdelan je bil leta 2010 in je bil leta 2025 generalno obnovljen. Gre za zelo dober stroj za prekrivanje profilov. Proizvodnja se lahko izvaja z EVA-poliolefin ali PUR lepilom. Po potrebi je mogoče proizvodnjo prilagoditi tudi za okenske profile. Iajdpfxsyifplj Abxeu