Oblikovanje in rezkanje

WEINIG Hydromat 22 B

Stanje: dober (rabljeno), Leto izdelave: 1985, WEINIG HYDROMAT 22B Weinig avtomatska naprava za podajanje, tip: EM2 Maksimalna delovna širina: 220 x 140 mm Laedpfx Abexbn T Ejhei Premer vretena: 50 mm Pogonski motor za podajanje: 7,5 kW Konfiguracija vreten: 1. Spodaj – 7,5 kW 2. Desno – 7,5 kW 3. Levo – 7,5 kW 4. Zgoraj – 18,5 kW 5. Spodaj – 30 kW 6. Spodaj – 11 kW 7. Zgoraj – 11 kW Hitrost podajanja: 5 – 60 m/min (frekvenčno krmiljeno) Podajanje: kardanska gred, s 5 pogonskimi valji vgrajenimi v mizi Vključenih veliko glav/ orodij

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 1025, doseg roke: 13.300 mm, nosilnost: 2.300 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Leto izdelave: 1989 (tovarniška obnova 2007) Laedpsv Ddtkjfx Abhoi Številka stroja: 1025 Širina tira, m: 3,0 Tip žerjava: OBX IV (leto izdelave 2007) Doseg: 13,3 m Nosilnost brez grabe: 2.300 kg / 13,0 m Grabež: vključen Postavitev žerjava: za kabino Stran kabine: leva Žaga: 1,3 m Alpha Merilni sistem: Enodelna pomoč z dvojnim merjenjem, leto izdelave 2007 !! Prodaja v imenu stranke !! Na voljo od aprila 2025

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete Weinig planing line consisting of: Bundle feeder. Automatic tilt destacking. Cross conveyor with reject separation. Conveyor to twin band saw. Twin band saw with diagonal cut. Singulation before planing infeed. Through-feed crosscut saw. Infeed to the planer. Laedswvqt Tepfx Abhji Weinig 22 B planing machine with 8 spindles. Frequency-controlled electronic feed up to 80 m/min. In 2023, the planer was equipped with a new frequency-controlled feed, new table, and new wear plates. Planer outfeed. Almab stacking system with 9-stick batten magazine, plus additional Almab stacker. The planing line is fully mechanized. Specifications: - Wood length: 2 – 6.10 m - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm - Bundle size input: 1.20 x 1.30 m - Output: 1.20 x 1.20 m (W x H) Well-maintained line. Regularly serviced.

Stanje: dober (rabljeno), Leto izdelave: 1989, Serijska številka: 220-1198 Sestavljeno iz: Prečni dovajalnik Weinig, največja dolžina: 2200 mm Osem-vreteni skobeljni stroj Weinig 22B Največja delovna širina: 220 x 140 mm Premer vretena: 50 mm Podajalni motor: 7,5 kW Konfiguracija vreten: 1. Spodaj 11 kW 2. Desno 11 kW 3. Levo 11 kW 4. Desno 7,5 kW 5. Levo 7,5 kW 6. Zgoraj 18,5 kW 7. Spodaj 11 kW 8. Zgoraj 11 kW Ljdpexbn Rqjfx Abheai Prečni izhodni transporter, največja dolžina: 2200 mm Priloženih več glav/orodij

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-78-13, Connected load: 3 kW Lajdpfxoh U A Rae Abhei Planing width: 410 mm 2-knife cutterblock with strip planing knives Extraction connection: 140 mm Infeed table length: 1,430 mm Outfeed table length: 1,070 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete Weinig planing line consisting of: - Package infeed, automatic tilt destacking, baton separator. - Cross conveyor with reject separation. - Conveyor feed to twin band saw, singulation before planing machine infeed. - Throughfeed cross-cut saw, infeed to the planing machine. - Weinig 22 B planing machine with 8 spindles; electronic frequency-controlled feed up to 80 m/min. - In 2023, the planing machine was equipped with a new frequency-controlled feed unit, new table, and new wear plates. - Outfeed from the planing machine; Weinig stacking unit with lath magazine, as well as Almab stacking system. Ledpfswvqvbex Abhoai The entire planing line is fully mechanized. Specifications: - Wood length: 2.0 – 6.10 m - Wood thickness: 10 – 120 mm - Wood width: 40 – 220 mm - Package size input: 1.20 x 1.30 m; output: 1.20 x 1.20 m (W x H) Well-maintained system with regular servicing.

Stanje: novo,

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW Lajdotynpxopfx Abhoi • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following machining operations: Ledpfx Abeirmyqehsai Tenoning / Finger jointing / Drilling Mortising / Milling / 4/5-axis profiling. Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Clamping table length: 1,400 / 1,800 mm One axis - unlimited C-axis: +/- 180°

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) Laedpfx Asvnv Uzsbhoi 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)