Oblikovanje in rezkanje

WEINIG Hydromat 25

Stanje: zelo dobro (rabljeno), delovna širina: 250 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 30.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: hidravlični, vrsta vhodnega toka: trifazni, število vreten: 9, vhodna frekvenca: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Kjdoq Au Tljpfx Adksww Feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-Bottom (11 kW) – with hydraulic clamping 2-Right (9 kW) 3-Left (11 kW) 4-Right (9 kW) 5-Top (15 kW) – with hydraulic clamping 6-Bottom (7.5 kW) – with hydraulic clamping 7-Top (7.5 kW) – with hydraulic clamping and straight jointer 8-Top (11 kW) – with hydraulic clamping and straight jointer 9-Bottom (11 kW) – with hydraulic clamping and straight jointer 11 powered rollers in the table

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame Kwedpfx Aded Szf Nokjw High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: rabljeno, Anzahl der Spindeln 5 St. Arbeitsbreite 250 mm Hobelhöhe 160 mm Hochgeschwindigkeits-Hobel- und Kehlautomat Weinig H25 zum vierseitigen hobeln und profilieren von nassem Holz (sägefrisch) Die Bilder zeigen den aktuellen Zustand der Maschine. Es wurden unter anderem einige original Weinig Neuteile verbaut und die Tische/Anschläge wurde überschliffen und neu beschichtet. Kwsdpfx Adsw R S T Ajksw Zur Fertigstellung werden weitere Neuteile benötigt. Diese werden nach Auftrag, unter Berücksichtigung der Kundenwünsche bestellt. Das Bedienpanel dient Testzwecken und ist provisorisch Spindel 1: Unten (7,5 kW) Spindel 2: Rechts (11 kW) Spindel 3: Links (11 kW) Spindel 4: Oben (15 kW) Spindel 5: Unten (tba) Angetriebene Tischwalzen: Ja Tischplatten: Überschliffen und neu beschichtet (gehärtet) Vorschub: 15 kW, hydraulisch

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 190 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, skupna masa: 10.000 kg, Four-Sided Planer Weinig Hydromat H25N with feeder 100 m/min - Made in Germany - Hydraulic feed up to 100 m/min - Suitable for wet wood - Infeed table TECHNICAL SPECIFICATIONS: Planing width: 250 mm Planing height: 190 mm Spindle diameter: 50 mm Electric height adjustment 1st lower spindle: 15 kW Kodpfx Aden Slk Ujkjww 2nd right spindle: 7.5 kW 3rd left spindle: 15 kW 4th right spindle: 7.5 kW 5th upper spindle: 7.5 kW 6th upper spindle: 15 kW 7th lower spindle: 7.5 kW 8th universal spindle 1800: 7.5 kW Feed infinitely variable up to 100 m/min Feed pump motor power: 22 kW Nine feed rollers on the table, including three before the first head Seven upper steel feed rollers Four upper rubber feed rollers Pneumatic pressure hold-down Jointer on spindles 1-6-7 Automatic table lubrication Infeed table: 3000 mm Infinitely variable feed speed up to 100 m/min Two upper pneumatic rollers Six lower feed rollers Minimum material length: 650 mm Transport dimensions: 11000 x 2400 x 2000 mm Weight: 10 t

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Ksdpfx Aow H Iv Tedkoww Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, working width 250 mm working height 140 mm 8 heads 3 toothed feed rollers on the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom variable feed speed up to 100 m/min Kedpfx Adex Sw T Sjkjww spindle diameter 50 mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron body

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, working width 250 mm working height 140 mm 8 heads Kwedpfjww H Rwsx Adkew 3 toothed feed rollers on the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom variable feed speed up to 100 m/min spindle diameter 50 mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron body

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Kodpfsv Uq Tljx Adksww Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: zelo dobro (rabljeno), Planing width: 250 mm Planing height: 120 mm 1. Bottom spindle Kjdpfxewlk E Ie Adkjww 2. Right spindle 3. Left spindle 4. Right spindle 5. Top spindle 6. Bottom spindle 7. Bottom spindle 8. Universal spindle 360° - Hydraulic feed: 6–60 m/min - 10 driven table rollers - Spindle diameter: 50 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981, with walk-in KASCHWIG soundproof cabin – ALMOST NEW, year 2017 - Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW - Hydraulic feed 6–60 m/min - Feed motor 22.0 kW - 4 driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindles 1 + 4 + 5 + 6 with outboard bearing - Spindles 1 + 4 with straight jointer - Feed rollers 170 mm - Approx. 10 hydro planing heads included - Extraction hood above the machine Kwjdpfx Ajtkt Tpedksw

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni. Kwedpfx Adegwqk Sskew