Mep Cobra 350 Sx nakup rabljenega (144)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
MEP
Mali oglas
Wiesbaden
667 km
Rollconveyor
MEPK 250
Pokliči
Stanje: skoraj kot novo (rabljeno), Overall length: 1500 mm
Width: 500 mm
Height adjustable with leveling feet: +/- 900 mm
6 rollers, diameter: 60 mm
Roller width: 430 mm
Fjdpjfn Thhefx Abtogc
Mali oglas
Velen
867 km
Hladna krožna žaga
MEPFALCON 352
Pokliči
Stanje: novo, Saw blade diameter: 350 mm
Cutting capacity at 90°: round 115 mm
Cutting capacity at 90°: square 100 mm
Cutting capacity at 90°: flat 130 x 80 mm
Cutting capacity at 45°: round 100 mm
Cutting capacity at 45°: square 85 mm
Cutting capacity at 60°: flat 90 x 80 mm
Clamping range: 130 mm
Speed: 30 / 60 rpm
Saw blade dimensions: 350 x 32 x 2.5 mm
Total power requirement: 1.1 / 2.2 kW
Machine weight: approx. 0.22 t
Space requirement: approx. 1200 x 860 x 900 mm
Special offer 2026 including base frame!
Manual cross-cut saw for miter cuts from 45° left to 45° right.
Steel worm gear, double ball bearing mounted
Fjdefmck Hspfx Abtjgc
Saw blade shaft mounted on eccentric made of spheroidal cast iron
Bronze wheel with key and tapered clutch to ensure maximum power transmission
to the steel worm gear
Vise with adjustable guide rails
Adjustable burr-free cutting device (enables burr-free cutting)
Length stop
Double return springs
Main safety switch
Emergency stop button
Speed selector switch
Electric coolant pump for lubrication and cooling of the saw blade (optionally
possible to install micro-spray device)
Motor 1.5/1.8 kW - 400 Volt
Mali oglas
Nemčija
867 km
Tračne žage - vodoravno
MEPSHARK 332-1 CCS
Pokliči
Stanje: novo, Cutting diameter: 300 mm
Saw band length: 3320 x 27 x 0.9 mm
Band speed: 40/80 m/min
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 670 kg
Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding.
Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system).
Electronic tension converter for the saw band with on-screen display.
Fjdpefg E H Tsfx Abtjgc
Manual vice with quick-release lock.
Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory).
Electric coolant pump for cooling and lubricating the saw band.
Chip removal brush.
Adjustable precision stops for making identical length cuts.
Machine is designed for pallet truck transport.
Bimetal saw band for solid and profile material.
Tool kit and operating instructions included.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Ratingen
829 km
Hladna krožna žaga
MEPTiger 300
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1998, premer žaginega lista: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was manufactured in 1998 but is in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution.
Machine features:
Manufacturer: MEP (Mecchia Eredi Pio)
Model: Tiger 300
Year of manufacture: 1998
Saw type: Semi-automatic/manual circular saw
Blade diameter: 300 mm
Cutting capacity: Suitable for round stock, square profiles, and mitre cuts
Cutting angles: 90° and 45°, with mitre cutting in both directions
Fodpfxjv Tlcrs Abtogc
Materials: Ideal for cutting iron, steel, and other metals
Condition: Good condition
Coolant supply: Integrated cooling system ensuring better cutting quality and extended saw blade life
Mali oglas
Nemčija
650 km
Tračna žaga - vodoravna
MEPSHARK 282 CCS
Pokliči
Stanje: novo, Premer reza 250 mm
Dolžina tračnega lista 2950x27x0,9 mm
Hitrost tračnega lista 36/72 m/min
Skupna priključna moč 1,8 kW
Teža stroja pribl. 440 kg
Absolutna posebna cena!! 7170,-EUR
(Aktualna cena od 2024 je 9425,-EUR)
Osnovna oprema:
Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili
Hidravlična naprava za napenjanje traku z indikatorjem napetosti
Podnožje s snemljivo kadjo za hladilno tekočino
Krtača za odstranjevanje ostružkov
Nastavljeni precizni prisloni za reze pod:
0°, 45° in 60° levo ter 45° desno
Obračevalna plošča za dvojne poševne reze
Električna naprava za dovod hladilne tekočine 48 V
(Možna dodatna namestitev mikro-razpršilne enote)
Fsdpfxsfg E H Nj Abtogc
Mali oglas
Lemmer
1.004 km
Hladna krožna žaga ø275 mm
MepFalcon 275
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 275 mm, Razpon rezanja okroglega jekla pri 45°: 70 mm, Obseg rezanja okroglega jekla pri 90°: 80 mm, hitrost rezanja: 4.590 mm/min, skupna masa: 110 kg, Obseg rezanja kvadratnega jekla pri 45°: 6.060 mm, Območje rezanja kvadratnega jekla pri 90°: 7.070 mm, vrtljajska hitrost (min.): 45 obr/min, največja hitrost vrtenja: 90 obr/min, Premer žaginega lista: ø275 mm
2 hitrosti: 45 in 90 obr./min
Primerno za: jeklo, aluminij in barvne kovine
Razpon mitre: -45° do +45°
Kapaciteta reza pri 90° okroglo: ø80 mm
Kapaciteta reza pri 90° kvadrat: 70 x 70 mm
Kapaciteta reza pri 90° pravokotno: 100 x 60 mm
Fgedoyplwlspfx Abtjc
Kapaciteta reza pri 45° okroglo: ø70 mm
Kapaciteta reza pri 45° kvadrat: 60 x 60 mm
Kapaciteta reza pri 45° pravokotno: 70 x 60 mm
Komplet z: sistemom za hlajenje
Država izvora: Italija
Moč motorja: 1,9 kW
Dimenzije stroja (D׊×V): 900 x 700 x 1650 mm
Teža stroja: 110 kg
Mali oglas
Madrid
1.639 km
MEP večnamenski center Syntax 25
MEPMultifunction Center Syntax 25
Pokliči
Stanje: rabljeno, Večnamenski center Syntax 25
Delovne ure: 4900 h.
Premeri palic: 8 – 25 mm
2 palici hkrati: 8 – 16 mm
Največja dolžina paketa: 12000 mm
Hitrost podajanja: 3,2 m/s
Hitrost upogibanja: 1000 º/s
Fjdjy Uhwmspfx Abtsgc
Čas rezanja: 4/10 s
Vgrajena moč: 31 kW
Mali oglas
Parma
392 km
Tračna žaga
MEPSHARK 330 CNC FE
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Tračna žaga MEP
Model: SHARK 330 CNC FE
Leto: 1996
Stanje: Prenovljeno
Kapaciteta rezanja pri 0 stopinjah: okroglo: 260 mm – kvadrat: 230 mm – pravokotnik: 330x230 mm
Fodpfxsyk Unvo Abtegc
Kapaciteta rezanja pri 45 stopinjah levo: okroglo: 240 mm – kvadrat: 200 mm – pravokotnik: 230x200 mm
Dimenzije rezila: 3150x25,4x0,9 mm
Hitrost rezanja: Počasna: 36 m/min – Hitra: 72 m/min
Višina delovne mize: 690 mm
Moč motorja rezila: 1,5 kW
Moč motorja elektropumpe: 0,13 kW
Moč motorja hidravlične enote: 0,22 kW
Dimenzije stroja: 2460x2020x1790H mm
Teža: 1220 kg
PREVERJENO
TAKOJŠNJA DOSTAVA
Mali oglas
Rödermark
625 km
Stroj za navzkrižno žaganje kovin
MEPFALCON 250
Pokliči
Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 080024-38 U, Offer 23332
Technical Specifications:
- Saw blade dimensions: 250 x 2 x 40 mm
- Saw blade spindle speed: 52 rpm
- Cutting capacity at 90° round: 80 mm
flat: 95 x 60 mm
- Mitre adjustable up to: 45°
- Material vice
Fodpfx Ajp Ebn Sebtegc
- Drive: 400 V / 0.5 kW
- Space requirement approx.: W 650 x H 1500 x D 750 mm
- Weight approx.: 100 kg
Mali oglas
Rödermark
625 km
Tračna žaga za kovino
MEPShark 200
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318
Tehnični podatki:
- Ročni tračni žagalni stroj
- Dimenzija žaginega traku: 2375 x 20 x 0,9 mm
- 2 hitrosti rezanja: N 33 / 66 o/min
- Največja vpenjalna zmogljivost: 205 mm
- Nastavljiv kot rezanja levo + desno: 30°
- Rezni razpon:
Fgodpexta N Asfx Abtsc
- 90° okroglo: 160 mm
- 90° kvadratno: 160 mm
- 90° ploščato: 200 x 100 mm
- 45° levo + desno okroglo: 140 mm
- 45° ploščato: 140 x 60 mm
- Pogon: 400 V / 1,5 / 1,8 kW
- Opremljenost s hladilnim sredstvom
- Odvodni valjčni transporter z omejevalom: 3000 mm
- Dovodni valjčni transporter: 1500 mm
- Teža: pribl. 350 kg
- Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm
Mali oglas
Rödermark
625 km
ALU - Krožna žaga stroj
MEPCondor 90 CNC - LR
Pokliči
Leto izdelave: 2001, stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data:
- Saw blade dimensions: 300 x 3.4 x 32 mm
- Saw blade speed: rpm
- Cutting capacity - at 90° round: 90 mm
- or square: 80 mm
- Pneumatic vices
- Automatic material feed with position control
- Single stroke up to approx. 1000 mm
- Multiple stroke
Fodpfxed Aai Tj Abtegc
- Swiveling operator panel with CNC control MEP
- Motorized dust extraction + mobile chip extraction
- Drive: 400 V / 1.1 kW
- Required space: approx. W 2750 x H 1800 x D 2000 mm
- Weight: approx. 600 kg
Mali oglas
Niederlangen
930 km
Tračna žaga
MEPTHOR 450
Pokliči
Stanje: rabljeno, Leto izdelave: 2023, Premer reza 450 mm
Dolžina tračnega lista 6600 x 41 x 1,3 mm
Višina mize 800 mm
Širina reza 450 mm
Območje reza pri 90 stopinjah: okroglo 450 mm
Območje reza pri 90 stopinjah: ploščato 450 x 270 mm
Hitrost reza 15 - 95 m/min
Skupna potrebna moč 7,5 kW
Fgodpfx Ajytx Sqebtec
Teža stroja pribl. 3000 kg
Potrebna površina pribl. 3750 x 1400 x 2100 mm
NOVA CENA ~ 40.700 EVRO
Zelo dobro stanje
Polavtomatska tračna žaga, vodenje z dvema stebroma
Oprema:
- hidravlični primež
- brezstopenjska hitrost reza
- transporter ostružkov
- linijski laser
- pogonjena krtača za ostružke
- naprava za hlajenje
- navodila za uporabo
Mali oglas
Ahaus
881 km
Tračna žaga
MEPSHARK 282 CCS
Pokliči
Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle
* Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring
Fgodpeftmxvefx Abtoc
* Robust, torsion-resistant and low-vibration saw frame made of cast steel
* Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles
* Quick-adjusting vice
* Carbide band guides for highest cutting precision
* Hydraulic unit for saw blade tensioning and monitoring, with display on manometer
* Clearly arranged control panel with all operating elements
* Machine base, coolant tray, coolant pump, and swarf brush
* Cutting diameter: 250 mm
* Cutting width: 280 mm
* Saw blade dimensions: 2950 x 27 x 0.9 mm
* Maximum vice opening: 285 mm
* Band speed: 36 / 72 m/min
* Cutting capacity at 90 degrees: round 250 mm
* Cutting capacity at 90 degrees: square 220 mm
* Cutting capacity at 90 degrees: flat 280 x 220 mm
* Cutting capacity at 60 degrees: round 120 mm
* Cutting capacity at 60 degrees: flat 140 x 80 mm
* Cutting capacity at 60 degrees: square 80 mm
* Cutting capacity at 45 degrees: round 200 mm
* Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm
* Cutting capacity at 45 degrees: square left 200 mm / right 170 mm
* Machine weight approx. 0.4 t
* Space requirement approx. 1.8 x 1.3 x 1.8 m
Mali oglas
Remseck am Neckar
527 km
Hladno krožne žage - avtomatski
MEPTIGER 352 NC 5.0
Pokliči
Stanje: novo, Saw blade diameter: 350 mm
Cutting range at 90 degrees, round: 115 mm
Cutting range at 90 degrees, square: 95 mm
Cutting range at 90 degrees, rectangular: 180 x 95 mm
Working height: 925 mm
Saw blade speeds: 15 - 90 rpm
Fgjdpsfg Rlcefx Abtjc
Total power requirement: 3.0 kW
Machine weight approx.: 0.68 t
Space requirements approx.: 0.8 x 1.0 x 1.85 m
Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel.
The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.
Mali oglas
Ahaus
878 km
Tračna žaga
MEPSHARK 282 CCS
Pokliči
Stanje: novo, Cutting diameter: 250 mm
Cutting range at 90°: flat 280 x 220 mm
Cutting range at 90°: square 220 x 220 mm
Cutting range at 45°: round 230 mm
Cutting range at 45°: flat 220 x 200 mm
Cutting range at 45°: square 200 x 200 mm
Cutting range at 60°: flat 140 x 100 mm
Cutting range at 60°: square 100 x 100 mm
Cutting range at 60°: round 110 mm
Vice width: 285 mm
Cutting speed range: 36/72 m/min
Fsdpfxexaarks Abtsgc
Saw blade dimensions: 2,950 x 27 x 0.9 mm
Total connected load: 1.5/1.8 kW
Machine weight approx. 440 kg
Space requirement approx. 1,620 x 1,360 mm
Features:
- Rugged electro-hydraulic bandsaw (INDUSTRIAL)
- Large, bearing-mounted rotating table
* For mitre cuts from 45° right to 60° left
- Automatic saw bow lowering
* Continuously adjustable feed rate
* End stop at end of cut
- Manual cutting function selectable
- 2x saw band speeds
- Saw band guides with carbide inserts
- 1x saw band
- 1x angle stop
- Integrated chip removal brush
- Control panel – front right
- Hydraulic pressure cylinder for saw band tensioning
* With analog pressure gauge (manometer)
- Machine base with forklift slots
- Coolant system
- Operating manual in German
Mali oglas
Nemčija
650 km
Stroj za upogibanje železa
MEP Macchine Elettroniche PiegatriciSystem N
Pokliči
Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible.
Fgodpfeuwrv Dsx Abtec
Mali oglas
Nemčija
650 km
Avtomatska tračna žaga - vodoravna
MEP - VOLLAUTOMATSHARK 331-1 SPIDER 5.0
Pokliči
Stanje: novo, Cutting diameter: 280 mm
Bandsaw blade length: 3320 x 27 x 0.9 mm
Cutting width: 330 mm
Control: NC
Cutting range at 90 degrees, flat: 330 x 260 mm
Cutting range at 90 degrees, square: 260 x 260 mm
Band speed: 15 – 100 m/min
Total power requirement: 2.2 kW
Machine weight: approx. 1.24 t
Space requirement: approx. 3.3 x 2.83 x 2.23 m
Attention: Special offer price!
• Hydraulic fully automatic bandsaw
• Mitre cuts up to 60° to the left possible
Fodpjfg E H Djfx Abtegc
• Saw blade length: 3650 x 27 x 0.9 mm
• Single stroke: 600 mm (programmable up to 10 m)
• Simple touch screen operation
• Saw arm made of spheroidal graphite cast iron – robust and stable
• Required footprint: 3.4 m²
• Installation dimensions: 1900 mm wide x 1800 mm deep
Mali oglas
Ahaus
878 km
Tračna žaga
MEPSHARK 281 CCS / MDE
Pokliči
Stanje: novo, Cutting diameter: 250 mm
Cutting range at 90° (flat): 280 x 200 mm
Cutting range at 90° (square): 230 x 230 mm
Cutting range at 45° (round): 190 mm
Cutting range at 45° (flat): 180 x 180 mm
Cutting range at 45° (square): 180 x 180 mm
Cutting range at 60° (flat): 110 x 110 mm
Cutting range at 60° (square): 110 x 110 mm
Cutting range at 60° (round): 120 mm
Vice opening: 285 mm
Blade speed range: 36 / 72 m/min
Saw blade dimensions: 2,950 x 27 x 0.9 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 370 kg
Space requirement: approx. 1620 x 1360 mm
Equipment/features:
- Heavy-duty electro-hydraulic band saw (INDUSTRIAL)
- Single-sided mitre cut up to 60°
- Automatic lowering of the saw bow
* With infinitely adjustable feed
* End stop at end of cut
- Manual cutting function selectable
- 2x band saw speeds
- Carbide blade guides
- 1x saw blade
- 1x angle stop
- Integrated chip cleaning brush
Fsdpfexaa H Ijx Abtegc
- Operator panel - front right
- Hydraulic tensioning device for saw blade
* With analogue pressure gauge (manometer)
- Machine base
- Operating manual in German
SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro dosing unit
Mali oglas
Ahaus
879 km
Tračna žaga
MEPSHARK 332-1 CCS
Pokliči
Stanje: novo, Cutting diameter: 300 mm
Cutting capacity at 90° (flat): 330 x 260 mm
Cutting capacity at 90° (square): 260 x 260 mm
Cutting capacity at 45° (flat): 270 x 200 mm
Cutting capacity at 45° (round): 250 mm
Cutting capacity at 45° (square): 250 x 250 mm
Cutting capacity at 60° (flat): 170 x 170 mm
Fodpfxexaaqte Abtsgc
Cutting capacity at 60° (square): 170 x 170 mm
Cutting capacity at 60° (round): 180 mm
Blade speed range: 40 / 80 m/min
Saw blade dimensions: 3650 x 27 x 0.9 mm
Machine weight: approx. 640 kg
Equipment:
- Heavy-duty electro-hydraulic band saw (INDUSTRIAL)
- Large, mounted rotary table
* For miter cuts from 45° right to 60° left
- Automatic saw frame lowering
* Infinitely variable feed rate
* Automatic cut-off at end of cut
- Manual cutting mode selectable
- 2 saw band speeds
- Saw blade guide made from carbide plates
- 1x saw blade
- 1x angle stop
- Swarf removal brush (rotating with blade)
- Control panel - front right
- Hydraulic tensioner for saw blade
* With analogue pressure gauge (manometer)
- Machine base with forklift pockets
- Coolant system
- Operating manual in German
Mali oglas
Ahaus
879 km
Tračna žaga
MEP - VollautomatSHARK 332-1 NC 5.0 MDE
Pokliči
Stanje: novo, Cutting diameter 300 mm
Cutting capacity at 90 degrees: flat 330 x 260 mm
Cutting capacity at 90 degrees: square 260 x 260 mm
Cutting capacity at 45 degrees: round 260 mm
Cutting capacity at 45 degrees: flat 270 x 200 mm
Cutting capacity at 60 degrees: round 180 mm
Cutting capacity at 60 degrees: flat 170 x 170 mm
Material support height 600 mm
Feed min/max 50,000 mm
Vise opening 335 mm
Blade speed 15 - 100 m/min
Automatic feed 600 mm
Saw blade dimensions 3650 x 27 x 0.9 mm
Total power requirement 2.2 kW
Weight 1,105 kg
Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m
electro-hydraulic fully automatic band saw, additionally equipped with:
* semi-automatic
* semi-automatic dynamic
* manual operation modes
Description:
- Robust electro-hydraulic fully automatic band saw (INDUSTRIAL)
* MEP - WINDOWS CNC control unit
* User interface with 7” touchscreen display
* Mechanical keys for machine operation functions
* Ensures reliable operation, simple and intuitive
* Real-time monitoring of all cutting parameters
* Swivel arm for convenient and safe operation
* Display and recording of alarm and error messages
- Mitre cuts in automatic cycle from 0° to 60° left
- Semi-automatic, semi-automatic dynamic and manual cycles
Fgjdpfx Aexab S Eobtjc
* Mitre cuts from 45° right to 60° left
- Manual or semi-automatic dynamic cycles selectable
* For non-programmed cutting operations
- Safety enclosure for operator protection
- Infinitely variable cutting speed adjustment from 15 to 100 m/min
* Via frequency inverter
- Latest generation hydraulic unit
* Highly efficient with low energy consumption
- Material feed via stepper motor and ball screw
* Mounted on counter-rotating ball bearings
* Single stroke 600 mm, repeatable for any required length
- Saw head positioning and feeder movement via joystick
- Automatic detection of cutting start position
- Manual blade tension control with display indicator
* Electronic converter
- Automatic monitoring of cutting force
* Servo valve mounted directly on the cylinder
- Coolant tray integrated into machine base
- Chip removal brush
- Bimetal saw blade for solid and profile materials
- Tool kit and operating manual with spare parts list
* Mitre accuracy = 2/12 degrees
* Length accuracy = plus/minus 0.1 mm per feed stroke
SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro-dosing system
Mali oglas
Ahaus
879 km
Tračna žaga
MEPPH 211-1 HB
Pokliči
Stanje: novo, Cutting diameter: 180 mm
Cutting capacity at 90°: square 180 x 180 mm
Cutting capacity at 90°: flat 200 x 150 mm
Cutting capacity at 45°: round 115 mm
Cutting capacity at 45°: square 110 x 110 mm
Cutting capacity at 45°: flat 125 x 110 mm
Cutting capacity at 60°: flat 70 x 70 mm
Cutting capacity at 60°: square 70 x 70 mm
Cutting capacity at 60°: round 70 mm
Blade speed range: 40 / 80 m/min
Saw blade length: 2,130 x 20 x 0.9 mm
Total power requirement: 0.75 kW
Machine weight approx. 190 kg
Equipment:
- compact / robust manual band saw
- with single-sided mitre device up to 60° to the left
- hydraulic lowering of the saw bow
* infinitely variable feed adjustment
* automatic cut-off at end of cut
- 2x saw blade speeds
- saw blade guide with carbide plates
- manual vice with quick-release
- machine base
- coolant system
- manual saw blade tension (star grip at front)
- 1x angle stop
- 1x metal saw blade
- operating manual
Fsdpfjxaa Tnsx Abtjgc
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Ahaus
879 km
Tračna žaga
MEPPH 261-1 HB
Pokliči
Stanje: novo, Cutting diameter: 225 mm
Cutting capacity at 90° (flat): 245 x 150 mm
Cutting capacity at 90° (square): 200 x 200 mm
Cutting capacity at 45° (flat): 160 x 140 mm
Cutting capacity at 45° (round): 160 mm
Cutting capacity at 45° (square): 140 x 140 mm
Cutting capacity at 60° (flat): 110 x 80 mm
Cutting capacity at 60° (square): 90 x 90 mm
Cutting capacity at 60° (round): 90 mm
Vice opening: 245 mm
Blade speed range: 46/92 m/min
Saw blade dimensions: 2450 x 27 x 0.9 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 240 kg
Space requirement: approx. 1,530 x 900 x 1,720 mm
Equipment:
- Compact, robust manual bandsaw
- Single-sided mitre device up to 60° to the left
Fgedpfx Aboxaa Dyjtsc
- Hydraulic lowering of the saw bow
* Infinitely variable feed adjustment
* Automatic shut-off at end of cut
- 2x bandsaw speeds
- Carbide-tipped blade guides
- Manual vice with quick-release
- Machine stand
- Coolant system
- Manual blade tensioning (star knob at the front)
- 1x angle stop
- 1x metal bandsaw blade
- Operating manual
Mali oglas
Ahaus
879 km
Tračna žaga
MEPSHARK 282 CCS / MDE
Pokliči
Stanje: novo, Cutting diameter: 250 mm
Cutting capacity at 90° (flat): 280 x 220 mm
Cutting capacity at 90° (square): 220 x 220 mm
Cutting capacity at 45° (round): 230 mm
Cutting capacity at 45° (flat): 220 x 200 mm
Cutting capacity at 45° (square): 200 x 200 mm
Fgedpfx Ajxabpwobtec
Cutting capacity at 60° (flat): 140 x 100 mm
Cutting capacity at 60° (square): 100 x 100 mm
Cutting capacity at 60° (round): 110 mm
Vice opening: 285 mm
Blade speed range: 36/72 m/min
Saw blade dimensions: 2,950 x 27 x 0.9 mm
Total power requirement: 1.5/1.8 kW
Machine weight: approx. 440 kg
Space requirement: approx. 1620 x 1360 mm
Equipment:
- Robust electro-hydraulic bandsaw (industrial)
- Large, bearing-mounted turntable
* For mitre cuts from 45° right to 60° left
- Automatic saw bow descent
* With stepless, adjustable feed
* Limit switch at end of cut
- Manual cutting operation selectable
- Two blade speeds
- Carbide blade guides
- 1x saw blade
- 1x mitre stop
- Integrated chip brush
- Control panel – front right
- Hydraulic tensioning device for saw blade
* With analogue pressure gauge (manometer)
- Machine base with forklift pockets
- Operating manual in German
SPECIAL ACCESSORIES INCLUDED:
- MEP LubeCut micro-dosing system
Mali oglas
Ahaus
879 km
Tračna žaga
MEP - VollautomatSHARK 230-1 NC 5.0
Pokliči
Stanje: novo, Cutting diameter: 230 mm
Cutting range at 90 degrees, flat: 230 x 230 mm
Cutting range at 90 degrees, square: 230 x 230 mm
Vice opening: 235 mm
Cutting speed range: 15 - 100 m/min
Saw blade dimensions: 2950 x 27 x 0.9 mm
Control: MEP CNC
Total power requirement: 3.18 kW
Machine weight: approx. 1,175 kg
Space requirement: approx. 1980 x 1105 mm
* Automatic double-column bandsaw with a footprint of only 2.5 square meters *
* Maximum performance in the smallest space *
Fedpfjxabq Usx Abtsgc
Equipment:
- Powerful CNC automatic bandsaw in double-column design
* for 0° cuts
- Windows CE-based touch screen control
* Swiveling control panel, 5.0 - 180°
* Up to 100 cutting programs with different quantities and lengths
* Minimizes programming time for recurring jobs
- 2 operating modes (semi-automatic and automatic)
* Enables efficient cutting under all conditions
- Saw head feed via hydraulic cylinders
. Driven linear guides with preloaded ball bearings
* Reduces mechanical vibrations during cutting
- Automatic alignment of the front saw blade guide head
* Reduces processing time
- Feed system with 600 mm stroke, repeatable, allows cutting of all lengths
- Vertical roller pairs for any type of bar or bundle material
- Infinitely variable blade speed from 15 to 100 m/min
- Robust cast iron (G25) structure to compensate for vibrations
- Safety enclosure complying with the latest safety regulations
. according to Machinery Directive EN 13898/2007
Mali oglas
Ahaus
879 km
Hladna krožna žaga
MEPFALCON 352
Pokliči
Stanje: novo, Saw blade diameter: 350 x 32 mm
Cutting capacity at 90 degrees: round 115 mm
Cutting capacity at 90 degrees: square 100 mm
Cutting capacity at 90 degrees: flat 130 x 80 mm
Cutting capacity at 45 degrees: round 100 mm (left)
Cutting capacity at 45 degrees: round 75 mm (right)
Speed: 30 / 60 rpm
Saw blade dimensions: 350 x 32 mm
Machine weight: approx. 220 kg
Features:
- Robust cast iron construction
- Gearbox with bronze gear and ground/hardened steel worm, running in special oil bath
- Vise with counter-tension device for double workpiece clamping
- Electric coolant pump for blade cooling and lubrication
Fsdsxabnmspfx Abtsgc
Scope of delivery:
- Adjustable length stop, 600 mm
- Tool kit
- Detailed operating instructions, maintenance manual
- Circuit diagrams and exploded drawings
- Crane lugs for transport
* Machine is supplied without saw blade
Special accessories included:
- Base cabinet with door (steel stand)
Olajšamo vam iskanje: "mep cobra 350 sx"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Mep Cobra 350 Sx (144)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































