Tračna žaga - vodoravna

MEP SHARK 282 CCS

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, vrsta vhodnega toka: Enosmerni tok, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, največja višina reza: 285 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Isdpfxexyywmo Agpea Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control Ijdsifk Rbepfx Agpoa For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Stanje: novo, Model designation: Shark 282 CCS Iodpfogvkbcox Agpoa

Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring * Robust, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles * Quick-adjusting vice * Carbide band guides for highest cutting precision * Hydraulic unit for saw blade tensioning and monitoring, with display on manometer * Clearly arranged control panel with all operating elements * Machine base, coolant tray, coolant pump, and swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw blade dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm Iodjftmxvepfx Agpsa * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm * Cutting capacity at 45 degrees: square left 200 mm / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Iedpfx Aofg E H Tsgpsa Tool kit and operating instructions.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Iodpfxjxabpwo Agpea Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Iedpfxjxaarkj Agpja Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Features: - Rugged electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides with carbide inserts - 1x saw band - 1x angle stop - Integrated chip removal brush - Control panel – front right - Hydraulic pressure cylinder for saw band tensioning * With analog pressure gauge (manometer) - Machine base with forklift slots - Coolant system - Operating manual in German

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2,480 mm Maximum cutting width: 245 x 150 mm Voltage: 230 V Drive power: 1.5 kW Saw band dimensions: 2,480 x 27 x 0.9 mm Mitre cuts: 0 – 60° Cutting speed: 20 – 90 m/min Machine weight: approx. 185 kg Space requirement: approx. 1.4 x 0.69 x 1.7 m NEW MACHINE PRICE: €2,459.00 + VAT - Infinitely variable speed control - Infinitely variable feed rate - Mitre cutting function Iedpfxjnlbmzs Agpoa - Bi-metal saw band - Material stop - Machine base - Coolant system

Stanje: novo, Table diameter 315 mm Horizontal table load 50 kg Vertical table load 25 kg Chuck diameter 200 mm Speed 0 - 5 rpm, steplessly adjustable Swivel range 90 degrees Isdpfx Agei Hg I Depsa Tilt adjustment: manual/motorized manual Connection voltage 230 V Machine weight approx. 45 kg Space requirement approx. 800 x 600 x 600 mm Welding turntable with - Integrated stand and universal torch holder - Quick-action chuck 200 mm - Foot switch - Manually tiltable/swivable - Stepless speed adjustment

Stanje: novo, Length 2000 mm Width 700 mm Working height 900 mm Iedpfxegvqzvj Agpsa Space requirement approx. 2.0 x 0.7 x 0.9 m Weight 160 kg Workbench – Made in Germany Industrial quality, especially robust and durable design for the highest demands! Workbench top 45 mm thick, made from high-quality multiplex beech 3 drawers on the left On the right, 1 drawer with 1 large compartment Open compartment in the center Finish: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite grey