Tračna žaga

MEP SHARK 282 CCS

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, vrsta aktuacije: ročni, skupna masa: 440 kg, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Oprema: dokumentacija / priročnik, Prodaja iz skladišča Albert-Proeller-Straße 9a, 86675 Buchdorf MEP ročni tračni žagalni stroj TIP: SHARK 282 CCS Moč motorja: 1,5/1,8 kW Odpiranje mize: 285 mm Mere tračnega lista: 2950x27x0,9 mm Teža: 440 kg Hitrost: 36/72 m/min. Rezno območje 0°: 250 / 220x220 / 280x220 mm Rezno območje 45° desno: 230 / 200x200 / 220x200 mm Rezno območje 45° levo: 200 / 170x170 / 200x140 mm Rezno območje 60° desno: 120 / 80x80 / 140x80 mm Rezno območje 60° levo: Iisdpfx Absy Uwuusxsc Dodatki: - Mikrodozirna naprava MD 12 MINI-GF - EL-1/2-2L - Odtokovna transportna valjčna proga tipa K 110

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm Iijdjg U Uv Repfx Abxec -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system Iiodpfx Aboy T N I Rsxsc - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: novo, Dimenzije tračne testere 2950x27x0,9 mm 2 brzine 36/72 m/min Otvor stege 285 mm Opseg sečenja pod 90 stepeni: okruglo 250 mm Opseg sečenja pod 90 stepeni: kvadrat 220 mm Opseg sečenja pod 90 stepeni: pločasto 280x220 mm Opseg sečenja pod 45 stepeni: okruglo 230/200 mm Opseg sečenja pod 45 stepeni: kvadrat 200/170 mm Opseg sečenja pod 45 stepeni: pločasto 220x200/200x140 mm Opseg sečenja pod 60 stepeni: okruglo 120 mm Opseg sečenja pod 60 stepeni: kvadrat 80 mm Opseg sečenja pod 60 stepeni: pločasto 140x100 mm Snaga 1,5 / 1,8 kW Težina 440 kg Dimenzije 1700x1000x1650 mm Iedpfx Ajyv Nptjbxeic - sa poluautomatskim spuštanjem - CUT CONTROL SYSTEM omogućava poluautomatsko spuštanje luka testere težinom glave testere - Brzina spuštanja se bezstupanjski podešava. Pojedinačni rezovi mogu se izvoditi sa ravnomernim napredovanjem - SHARK 282 CCS poseduje obrtni sto za obostrano sečenje pod uglom. Rez se uvek odvija u istoj brazdi

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Iijdpfx Aofg Rlcobxoc Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Premer reza 250 mm Dolžina tračnega lista 2950x27x0,9 mm Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Iisdpofg E H Njfx Abxsc Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Iisdpfx Ajxaarkobxjc Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Features: - Rugged electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides with carbide inserts - 1x saw band - 1x angle stop - Integrated chip removal brush - Control panel – front right - Hydraulic pressure cylinder for saw band tensioning * With analog pressure gauge (manometer) - Machine base with forklift slots - Coolant system - Operating manual in German

Stanje: novo, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 Ijdopk Iv Uepfx Abxeic The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 to 890 mm Underside reinforced with ribbing. Including floor bearing Optional accessories available! Surface flatness: 0.2 - 0.4 mm per 1000 mm. Table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: novo, Model designation: Shark 282 CCS Iedpfsgvkbcsx Abxsic

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: Iijdpfx Aoxabpwobxoc - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Iiodpoilg Hdjfx Abxoc Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual