Mep Shark 282 Ccs nakup rabljenega (120)

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950x27x0.9 mm Table height: mm (not specified) Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Space requirement: approx. m (not specified) Absolute special price!! 7,170 EUR (Current price as of 2024 is 9,425 EUR) Standard equipment: - Vice with quick adjustment and adjustable guide rails - Hydraulic blade tensioning device with tension pressure gauge - Base frame with removable coolant tray - Chip removal brush - Precision stops set for cuts at: 0°, 45° and 60° to the left and 45° to the right - Rotary table for double miter cuts Guodsfg E H Njpfx Ah Dsh - Electric coolant system 48 V (Option to install a micro-spray device)

Stanje: novo, Model designation: Shark 282 CCS Gusdpfxogvkbcs Ah Deh

Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring * Robust, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles * Quick-adjusting vice * Carbide band guides for highest cutting precision * Hydraulic unit for saw blade tensioning and monitoring, with display on manometer * Clearly arranged control panel with all operating elements * Machine base, coolant tray, coolant pump, and swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw blade dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm * Cutting capacity at 45 degrees: square left 200 mm / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m Gedpfx Ajftmxvoh Douh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, vrsta vhodnega toka: Enosmerni tok, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, največja višina reza: 285 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections Gusdpfx Ahow N N Ale Dsh - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: rabljeno, Leto izdelave: 2007, Premer reza 250 mm Dolžina tračne žage 2950 x 27 x 0,9 mm Hitrost traku 36/72 m/min Gusdpoxfwbyofx Ah Dsh Skupna potrebna moč 1,8 kW Teža stroja cca 320 kg Dimenzije DxŠxV 1,5 x 0,9 x 1,4 m

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: Gujdpfoxabpwex Ah Dsh - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Guodexaarkopfx Ah Djh Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Features: - Rugged electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides with carbide inserts - 1x saw band - 1x angle stop - Integrated chip removal brush - Control panel – front right - Hydraulic pressure cylinder for saw band tensioning * With analog pressure gauge (manometer) - Machine base with forklift slots - Coolant system - Operating manual in German

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Guodpfx Asfg E H Ijh Dsh Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Model designation Guodjgvkchspfx Ah Dsh Shark 281 CCS

Stanje: dober (rabljeno), Leto izdelave: 2014, Metal band saw, bandsaw machine, bandsaw, mitre bandsaw machine - Manufacturer: MEP, mitre bandsaw machine for cuts from 45° right to 60° left - Model: Shark 332 CCS - Drive power: 1.8 kW - Cutting capacity, flat: 90° 330 x 270 mm / 45° 270 x 200 mm Godswtly Nepfx Ah Dsuh - Cutting capacity, round: 90°/45° 300 mm / 260 mm - Maximum cutting height: 300 mm - Maximum cutting width: 270 mm - Saw band speed: adjustable, 20 - 90 m/min - Saw band: 3320 x 27 x 0.9 mm - Coolant system - Dimensions: 2070/1190/H1620 mm - Total weight: 697 kg

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. Gujdecgbq Iopfx Ah Djh • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Gusdpjfg E H Tjfx Ah Djh Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: novo, Model designation Shark 332-1 CCS Gedpfogvquwox Ah Douh

Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 375 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description: - Saw bow, vise unit, and base made from robust cast iron - Precision angle indicator integrated into the cast iron frame Guodpfocgbp Isx Ah Dsh - Electrical system (with fully identifiable wiring and low-voltage system 24 V) - IP 55 selector handle for manual operation (where applicable) - Rotating chip brush for the saw blade - Quick-closing device with vise for rapid approach - Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts list in the user’s language - SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed - CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines - Quick-set vise - Hydraulic converter for blade tension display - Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame - MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item Number SH281SXI Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 435 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description Semi-automatic function: The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically. Key Features: - New, centralized control panel mounted on an articulating arm - Latest generation hydraulic control unit, highly efficient with low energy consumption - Base frame with removable coolant tank The machine complies fully with all CE regulations! Please refer to the attached PDF document for further technical specifications.

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Vice: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual operation, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At the start of the cycle: – Vice closes, motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position, then starting the cycle via hand button). Some features: - New centralised control panel on an articulated arm for easy operation from any working position. - Low-voltage operating panel: Gsdsfg E H Sopfx Ah Deuh - Polyester membrane keypad with thermoformed, raised buttons and actuation control signal. - Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time used for completed cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position - IP55 manual 24 V cycle switch lever - Complete program for all special cutting cycles - Possibility to define other special cutting cycles for specific applications - New, latest-generation hydraulic control unit, highly efficient and energy-saving - Large work surface with turntable on roller bearings (265 mm), fitted with preloaded thrust bearing - Dual band speed (36/72 m/min.) with control panel - Prepared for installation of an electronic inverter for stepless band speed regulation from 20 to 90 m/min. - Adjustable saw head stroke controlled directly from the panel to adapt to the workpiece height - Clamping device can be shifted laterally left and right, featuring quick-action vice - Manual blade tension control, display on screen via electronic converter - Machine base with pull-out coolant tray - Electric coolant pump for saw blade cooling and lubrication - Prepared for installation of optional minimum-quantity lubrication system, in addition to the standard emulsion oil lubrication - Swarf removal brush - Machine suitable for pallet truck transport - Length stop for repetitive cuts - Material support arm with roller, to attach loading table - Bimetal saw blade for solid and profile material - Tools and user manual in the language of the operator

Stanje: novo, Model designation: Shark 282 SXI evo Guodpfx Ahogvkcte Deh

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Guedpfscgbt Rjx Ah Deh Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Gjdpfxoxaa S Rs Ah Douh Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90° (flat): 280 x 200 mm Gsdexaa H Iopfx Ah Djuh Cutting range at 90° (square): 230 x 230 mm Cutting range at 45° (round): 190 mm Cutting range at 45° (flat): 180 x 180 mm Cutting range at 45° (square): 180 x 180 mm Cutting range at 60° (flat): 110 x 110 mm Cutting range at 60° (square): 110 x 110 mm Cutting range at 60° (round): 120 mm Vice opening: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic lowering of the saw bow * With infinitely adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x band saw speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Operator panel - front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system Gsdpfx Ajxaatbsh Deuh - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Equipment: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Large, mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw frame lowering * Infinitely variable feed rate Gjdexaaqtopfx Ah Djuh * Automatic cut-off at end of cut - Manual cutting mode selectable - 2 saw band speeds - Saw blade guide made from carbide plates - 1x saw blade - 1x angle stop - Swarf removal brush (rotating with blade) - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle Gedpfx Ahoppgdds Deuh -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade

Stanje: nepreverjeno (rabljeno), MEP Shark 330 CNC FE avtomatski tračni žagalni stroj za kovino, popolnoma hidravličen, netestiran. Velikosti rezov – glejte slike. Približne dimenzije: dolžina: 2200 mm, globina: 1850 mm, višina: 2000 mm. Podrobnosti in stanje – glejte slike. Prejmete račun z uporabo diferencirane obdavčitve po paragrafu 25a. DDV ni odbiten. Pošiljanje je možno po dogovoru in za doplačilo. Gedpfx Ahoxmti As Douh

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Godpfx Ajfg E H Ejh Deuh Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter round: 230 mm Gedpjfg E Hyefx Ah Dsuh Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.