Tračna žaga - vodoravna

MEP SHARK 282 SXI - Evo

Stanje: novo, Model designation: Shark 282 SXI evo Gjdpfx Asgvkctsh Deuh

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. Gujdpfx Ahocgbq Is Deh • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice Gsdpfx Ajxaa S Roh Djuh SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: Gusdoxaatbepfx Ah Deh - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice