Vodoravne tračne žage - ročne - obseg rezanja okrogel od 300 mm

MEP Shark 332-1 CCS

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Nedpfx Asfg E H Tsb Ujdd Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Ndsdpfxorn Riqj Ab Uod Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Equipment: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Large, mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw frame lowering * Infinitely variable feed rate * Automatic cut-off at end of cut - Manual cutting mode selectable - 2 saw band speeds - Saw blade guide made from carbide plates - 1x saw blade - 1x angle stop - Swarf removal brush (rotating with blade) - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets Nsdpoxaaqtjfx Ab Usdd - Coolant system - Operating manual in German

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Ndsdpfx Aocgbt Reb Ujd Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Nodpoifk Rbsfx Ab Uodd Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Leto izdelave: 2024, Stanje: novo, Working chamber 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-proof negative pressure cabin in a robust sheet steel construction Work gloves Special rubber, wear-resistant, cotton lining on the inside, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight seal, double-walled, noise-insulated foam filling, lockable, with electrical safety interlock Abrasive recovery Via coordinated MHG recovery system Ndjdeh Hxubopfx Ab Uod Operation ON/OFF switch for extraction and lighting, pressure regulator, manometer, and foot switch Viewing windows

Stanje: novo, Leto izdelave: 2025, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cut unit (Random System): Saw cut optic 2. Brush: Metal, diameter 220 mm Nodpfx Abohwrp Rs Uodd 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Motor power, saw roughing unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2,800 mm Machine width: 1,500 mm Machine height: 1,600 mm Weight: 1,500 kg

Stanje: novo, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Njdogvkmropfx Ab Usdd Max. pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a universal hydraulic press specifically designed for bending, profiling, and straightening operations. The machine's applications vary depending on the accessories installed on the worktable, tool holder, or in the punch and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending work. The press can also be supplied with tools (e.g., block punches) that can be mounted on the tool holder, as well as tools that can be fitted into the punch and pin holes for a range of different operations. • The hydraulic system can be adjusted via pressure and flow control valves, which influence the pressing force and speed of the press. The press features a built-in pressure gauge. • The control panel is used for operating the press, displaying the piston stroke, and selecting between manual or automatic operation. The HB-28 model also comes with a built-in memory capable of storing up to 4 different programs. • Operation is carried out via electric foot pedals.

Stanje: novo, Typ: R-RP1300 Arbeitsbreite: 1300 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe (Dicke): 3–200 mm Vorschubgeschwindigkeit: 0–30 m/min Gesamtmotorleistung: 30,37 kW Motorleistung erste Einheit: 15 kW Motorleistung zweite Einheit: 11 kW Staubreinigungsbürste: 0,37 kW Vorschubmotor: 4 kW Hubmotor: 0,37 kW Walzendurchmesser erste Einheit: 240 mm Walzendurchmesser zweite Einheit: 210 mm Schleifbandabmessung: 1330 x 2200 mm Ndjdpfx Abjdflqas Uod Betriebsdruck (Luft): 0,6 MPa Absaugleistung: 9.600 m³/h Transportabmessungen: 2.700 x 2.100 x 2.400 mm Gewicht: 3.300 kg

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment Nedpfoqy E Rlex Ab Uodd electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg