Stroj za izdelavo čepov

Scheer DB 150

Stanje: rabljeno, Leto izdelave: 2024, STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. Fedpfx Acjxnlflodjgf - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vrst lukenj. - Vpenjalne roke za nosilec vpenjala, zasnovane za pozicijo vrst lukenj do največ 300 mm. - Idealen tristopenjski sistem orodij. - 1 komplet svedrov za vrtanje lukenj za moznike: - 5 karbidnih svedrov za moznike, Ø 8x77 mm, desno - 4 karbidnih svedrov za moznike, Ø 8x77 mm, levo. Osnovni stroj: STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. - Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vr

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Fodpfxecdrmme Acdsgf Brez krmiljenja

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Fgodpfx Acow A A E Isdsf Maximum length: 2500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, model krmilnika: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-scoring saws, and a patented central angle retracing system which reduces cycle times by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor rated at 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller elements 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Quality-related advantages • CE-certified, GS-certified, FPH wood-dust certified • Divisions: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the clamp • Possibility to mount 2 additional two-finger clamps • 4 manual alignment fences on clamps • Possibility to mount 1 additional single-finger clamp • Air cushion table nozzle spacing: 70 x 70 mm Technical advantages • Scoring saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value at HS motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material transport, permanent positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table retained, easy and cost-effective replacement of phenolic resin plates, minimal cylinder wear, uniform pressure application, minimal trim cut, significantly reduced cycle times, top cut quality, minimal setup times, cycle time reduction, electronically adjustable pressure force Fodpfxeyaiiyo Acdegf • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Clamps: 7 units (first 3 are two-finger, remaining are single-finger) Additional Information Machine still under power.

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Fgedpfevxlq Hjx Acdef Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Waelzkolbenpumpe (Roots blower) Manufacturer: Pfeiffer Model: Okta WKP 2000 A M Pumping speed: approx. 2065 m³/h Fodpfxsdiwcce Acdsgf Warranty: 12 months

Stanje: novo, Leto izdelave: 2025, Rotary vane dry vacuum pump. Available in stock. Brand new pump. Comes with a 12-month warranty. Fedpfxsftzpve Acdegf Nominal flow rate: 25 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. For any questions, please contact us.

Stanje: delavnici obnovljeno (rabljeno), Working width: 3,500 mm Working height: 2,550 mm Number of pressing cylinders: 6 pcs. Loading dimensions (L x W x H): 4,500 x 950 x 2,900 mm Hess Speedy frame press ----- Will be overhauled Max. insertion dimension / pressing length: 3,500 mm Max. insertion dimension / pressing height: 2,550 mm Sliding carriage for width adjustment, locking in 50 mm increments Double-hole raster system Electric height adjustment of long-stroke cylinders (hydraulic) Fodpjxnqw Tjfx Acdogf Support plate insertion height can be preselected in 4 positions 3 vertical pressing cylinders, stroke 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 3 horizontal pressing cylinders, stroke 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Press plate depth: 100 mm, width: 140 mm Raster cylinder fixing / support: 50 mm Central pressure beam with shut-off valve End-of-stroke pressure shutdown and post-pressurization control Control and pressing sequence via push-button operation Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400V 3 pcs. tilting pressure plates for angled windows 1 pc. tilting pressure plate for pointed windows 1 pc. extension for tilting pressure plate 1 pc. small parts kit Image and video are not original, but show an identical model ----- (Technical data as per manufacturer – no liability assumed!)

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Height: 1000 mm Flow rate: 1.5 m³/min Fjdsinur Aopfx Acdsgf Power: 11 kW

Stanje: novo, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Edging length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Main motor output (S1 100%): 5.5 kW (7.5 HP) Main motor power consumption (S6 40%): 7.5 kW (10.0 HP) Scoring motor output: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre gauge • Eccentric clamp • Table widening • Extendable telescopic fence • Rip fence flaps Fgedpfx Aed N S T Docdof • Support table with roller • Push stick • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double-roller carriage with central and end position locking for precise cuts • Maximum saw blade diameter of 400 mm for cutting heights up to 125 mm • Support table with roller for easy handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Equipped as standard with independently driven scoring unit (motor output 0.75 kW) • Robust saw unit with dual-sided, cast-iron guided swivelling elements • Table widening for cutting widths up to 1300 mm included • All aluminium parts (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously adjustable from 90° to 45°