Mep Shark 282 Ccs nakup rabljenega (121)

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Hnedjfg E H Djpfx Ah Deu Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Model designation: Shark 281 SXI evo Hnodpsgvkglsfx Ah Dsu

Stanje: novo, Length: 1500 mm 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 – 1030 mm Required space: 1500 x 250 x 650/1030 mm Hjdpfx Ajfxu Tksh Djnu

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Hnsdpefm T Hbsfx Ah Dju Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: novo, Model designation Hodpfx Ael Sva Ijh Denu SHARK 331-1 NC 5.0 SPIDER

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Hedpfx Ahefg E Hzj Denu Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, Model designation Shark 332-1 SXI evo Hjdpfxsgvkafe Ah Djnu

Stanje: rabljeno, Leto izdelave: 2001, Premer rezanja 210 mm Območje rezanja pri 90 stopinjah: ploščato 270 x 200 mm Območje rezanja pri 90 stopinjah: kvadratno 200 mm Območje rezanja pri 60 stopinjah: okroglo 90 mm Območje hitrosti: 36 / 72 m/min Moč motorja 0,7 / 0,81 kW Hedpfxsxlufij Ah Denu Dimenzije tračne žage 2750 x 27 x 0,9 mm Teža stroja pribl. 0,4 t Dimenzije DxŠxV 0,8 x 1,4 x 1,5 m Tračna žaga z Autocut - Naprava za poševno rezanje max. 60° - Naprava za hlajenje

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. Hnsdpolf Tu Uofx Ah Dju With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Hjdpfx Ahsfg E Iao Donu Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Hnodpfx Ajxab S Esh Dsu Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Hnodpfxefg E Ibo Ah Deu Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display Hnsdpfx Ahoxabwhs Dou * Easy and fast setting of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Hnedpjfg E H Rsfx Ah Dsu Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vice opening: 235 mm Cutting speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 3.18 kW Machine weight: approx. 1,175 kg Space requirement: approx. 1980 x 1105 mm * Automatic double-column bandsaw with a footprint of only 2.5 square meters * * Maximum performance in the smallest space * Equipment: - Powerful CNC automatic bandsaw in double-column design * for 0° cuts - Windows CE-based touch screen control * Swiveling control panel, 5.0 - 180° * Up to 100 cutting programs with different quantities and lengths * Minimizes programming time for recurring jobs Hodpfx Ahexabq Ue Dsnu - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Driven linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable, allows cutting of all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed from 15 to 100 m/min - Robust cast iron (G25) structure to compensate for vibrations - Safety enclosure complying with the latest safety regulations . according to Machinery Directive EN 13898/2007

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). Hodpfefg E H Uex Ah Dsnu - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Cutting range at 45° (round): 260 mm Cutting range at 45° (flat): 270 x 200 mm Cutting range at 60° (round): 180 mm Cutting range at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise jaw opening: 335 mm Blade speed: 15 – 100 m/min Automatic feed: 600 mm Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (LxWxH): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic bandsaw, including additional: * Semi-automatic Hnjdpfxsxabavo Ah Dju * Semi-automatic-dynamic * Manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for saw operation functions * Ensures reliable operation, easy and intuitive to use * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarms and error messages - Mitre cuts in automatic cycle from 0° to 60° on the left - Semi-automatic, semi-automatic-dynamic, and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For performing cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High performance with low energy consumption - Material feed via stepper motor and ball screw spindle * Mounted on opposite ball bearings * Single stroke of 600 mm, repeatable for any length - Positioning of saw head and feeder movement via joystick - Automatic detection of cut start position - Manual blade tension control with display feedback * Via electronic converter - Automatic monitoring of cutting load * Through servo valve mounted directly on the cylinder - Coolant tray integrated in machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter: 210 mm Cutting capacity at 90° (flat): 270 x 200 mm Cutting capacity at 90° (square): 200 mm Cutting capacity at 45° (round): 180 mm Cutting capacity at 45° (flat): 180 x 190 mm Cutting capacity at 45° (square): 180 mm Vice width: 200 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2750 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.35 t Hnsdswkvqtepfx Ah Dou Space requirement: approx. 0.95 x 1.7 x 1.9 m Bandsaw machine equipped with: - Cut-control system - Double mitre facility, 45° right and left - Mitre facility adjustable via turntable - Coolant system

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display Hjdpfjxaa Tzjx Ah Djnu - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting range 300 mm Cutting range at 90°: flat 330 x 260 mm Cutting range at 90°: square 260 x 260 mm Cutting range at 45°: round 260 mm Cutting range at 45°: flat 270 x 200 mm Cutting range at 45°: square 250 mm Cutting range at 60°: round 180 mm Cutting range at 60°: flat 170 x 170 mm Cutting range at 60°: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Hedpfx Ajxaa Ewoh Dsnu Minimum cutting diameter 5 mm Blade speed 15 – 100 m/min Vise opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - Includes additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control unit with 7” touch-screen display * Easy and fast adjustment of all machine parameters * Additional soft keys and backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm length - Material feed via stepper motor and ball screw spindle * Single stroke 600 mm, repeatable to reach any cutting length * Accuracy of ±0.1/600 mm - Infeed unit with safety cover and safety limit switch - Precise adjustment of cutting feed, indicated in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start point - Large, dimensionally stable cast steel band wheels, adjustable - Saw band tensioning with monitoring and display on the screen - Carbide band guides for maximum cutting precision - Automatic monitoring of cutting load - Quick-adjust vise * With interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw band - Operating manual in German Manufacturer's note: If installing this saw in a network with a residual current circuit breaker (RCD), this should be all-current sensitive and set at no less than 300 mA.

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Cutting capacity at 45 degrees, flat: 300 x 200 mm Cutting capacity at 45 degrees, round: 260 mm Cutting capacity at 45 degrees, square: 250 x 250 mm Cutting capacity at 60 degrees, flat: 200 x 170 mm Cutting capacity at 60 degrees, square: 170 x 170 mm Cutting capacity at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Space requirement approx. 1647 x 2157 mm Weight: 720 kg Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotating table - MEP EVO microprocessor control for monitoring all machine functions * Swivels, mounted front right - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering speed - Carbide blade guides - Hydraulic blade tensioning, incl. digital value display - 2 blade speeds - 1 BI-Metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow Hsdpfoxaax Dox Ah Djnu - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Cutting range at 45 degrees, flat: 270 x 200 mm Hsdpfjxaav Aox Ah Donu Cutting range at 45 degrees, round: 260 mm Cutting range at 45 degrees, square: 250 x 250 mm Cutting range at 60 degrees, flat: 170 x 170 mm Cutting range at 60 degrees, square: 170 x 170 mm Cutting range at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Heavy-duty electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for all functions * Mounted at the front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable bow-feed rate adjustment - Carbide blade guides - Hydraulic blade tensioning incl. digital value display - 2 blade speeds - 1 bi-metal band saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling Hedexaagbspfx Ah Denu - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 225 mm Cutting capacity at 90°: flat 245 x 150 mm Cutting capacity at 90°: square 200 x 200 mm Cutting capacity at 45°: flat 160 x 140 mm Hodpfexaaciex Ah Denu Cutting capacity at 45°: round 160 mm Cutting capacity at 45°: square 140 x 140 mm Cutting capacity at 60°: flat 110 x 80 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 60°: round 90 mm Vice width: 245 mm Blade speed range: 46/92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Total power requirement: 0.7 / 0.81 kW Machine weight approx. 265 kg Features: - Compact / robust manual bandsaw - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Hydraulic lowering of the saw bow * Stepless feed adjustment * Automatic cut-off at stroke end - 2x saw blade speeds - Carbide blade guides - Manual vice with quick-action clamping - Machine base - Coolant system - Manual blade tensioning (star grip at the front) - 1x angle stop - 1x metal saw blade - Operating manual

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Hedow U U Uwspfx Ah Djnu Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice