Tračne žage - vodoravno

MEP SHARK 332-1 SXI EVO

Cutting diameter: 300 mm
Cutting capacity at 90° flat: 330 x 260 mm
Cutting capacity at 90° square: 260 x 260 mm
Cutting capacity at 45° flat: 270 x 200 mm
Cutting capacity at 45° round: 260 mm
Cutting capacity at 45° square: 250 x 250 mm
Cutting capacity at 60° flat: 170 x 170 mm
Cutting capacity at 60° square: 170 x 170 mm
Cutting capacity at 60° round: 180 mm
Blade speed range: 40 / 80 m/min
Saw blade dimensions: 3320 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left.
Some features:
- New centralized control panel mounted on an articulated arm.
- Low voltage operating unit:
- Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal.
- Display shows:
* Diagnostics (messages in user language)
* Alarms (description of alarm causes)
* Status of inputs and outputs
* Cut counter
* Cutting time per cycle
* Saw band motor current draw
* Saw band tension
Gbsdpjfg E H Uofx Anfjl
* Saw band speed
* Numeric display of head position.
- Manual 24V IP55 cycle selector switch.
- Complete cycle program for all special cutting operations.
- Identification of additional special cutting cycles for specific applications.
- Latest generation, high-performance hydraulic control unit with low energy consumption.
- Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing).
- Two band speeds (40/80 m/min.) with control system.
- Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min.
- Bow stroke programmable directly from the control panel for adaptation to the material being cut.
- Sliding clamping device, adjustable left and right, with quick-release vice.
- Manual blade tensioning control with display via electronic converter.
- Base frame designed for complete coolant recovery, even during maximum angle cuts.
- Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame.
- Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil).
- Swarf removing brush.
- Machine is suitable for pallet truck transport.
- Adjustable length stop for repeat cuts of the same length.
- Material support arm with roller for securing the loading table.
- Bimetal saw blade suitable for solid and profile materials.
- Tool kit and operating manual in the respective user language.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.