Scm T130 nakup rabljenega (576)

Stanje: zelo dobro (rabljeno), premer trna: 30 mm, Oprema: motorna zavora, SCM spindle moulder, model T130, with four-roller power feed unit, table size 1200x730 mm, maximum speed 10,000 rpm, spindle diameter 30 mm. Motor: 5.5 kW. For an additional charge, a spindle with 40 mm diameter can also be supplied. Kodpfxjt Rfn Ej Ah Aofa

Stanje: zelo dobro (rabljeno), Spodnjevretenasta rezkarka SCM T130 Dolgi mizni ploskvi z izvlekom 4-valjni podajalnik Vreteno premera 30 mm Motor 5,5 kW 5 hitrosti vretena Nožna zavora Vrtljaji levo-desno Kedoxw U N Ejpfx Ah Aofa Stanje stroja zelo dobro,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer vretena: 30 mm, – Italijanska proizvodnja – CE oznaka – Dolgi delovni pulti TEHNIČNI PARAMETRI: – Premer vretena: 30 mm – Višina vretena: 150 mm – Največji premer orodja: 350 mm – Pet vrst hitrosti vrtenja: 3000 / 4500 / 6000 / 7000 / 10.000 obr/min – Nastavitev višine – Električna zavora – Moč motorja: 5,5 kW – Dimenzije mize: 730 x 1200 mm Kfedpow Ip R Hsfx Ah Asa – Dve pomožni mizi: 410 x 670 mm – Višina mize od podnožja: 925 mm – Premer izhoda: 2 x 120 mm – Dimenzije stroja (d/š/v): 261 / 100 / 120 cm – Teža: 800 kg

Stanje: rabljeno, Namizni rezkar SCM T130 NPS - rabljena - natančno nastavljiv rezkalni prislon, miza za čepkanje in utorjenje, vrtenje v desno/levo ----- Tehnični podatki ----- Velikost mize: 1.080 x 750 mm, Premer vretena: 30 mm, Hitrosti: 3.000/4.500/6.000/7.000/10.000 vrt./min., Premer priključka za odsesavanje: 120 mm, Kfsdpfxsw Nv Nfo Ah Aea Premer spodnjega priključka za odsesavanje: 120 mm

Stanje: rabljeno, Leto izdelave: 1999, 1 kos namiznega rezkalnega stroja SCM T130N z napeljavo in razno dodatno opremo, skladno s slikami in ogledom, demontaža v lastni režiji. Barva: siva. Leto izdelave: 1999. Stanje: rabljeno. Način plačila: predplačilo z bančnim nakazilom. Skladišče blaga: mizarna/hala 2. Dostava: Samo osebni prevzem – dostava za to postavko ni možna! Kjdpfsx Iffuex Ah Ajfa

Stanje: rabljeno, Leto izdelave: 1999, Table size 1200x730 mm Motor power 5.5 kW Spindle diameter 30 mm Speeds 3000-4500-6000-7000-10000 rpm Weight 810 kg SCM Spindle Moulder T 130 N - Year of manufacture: 1999 - Serial No.: AB125014 - Function tested - Worktable 1200 x 730 mm - Table height 920 mm - Spindle diameter 30 mm - Spindle clamping length 180 mm - Spindle stroke 260 mm - Speeds 3000/4500/6000/7000/10000 rpm - Motor 5.5 kW / 380 V - CE conformity Kfedpfsxq Hiwjx Ah Aea - Mechanical digital display of spindle height (SICO counter) - Interchangeable milling arbor MK 5 - Milling fence, fine adjustable, max. 250 mm tool diameter - Extraction hood for milling fence 120 mm - Curved work safety device with extraction nozzle 120 mm - Forward/reverse rotation - Spindle lock with foot pedal - Speed display - Star-delta switch - Motor protection switch, undervoltage release - Main switch, lockable - Automatic motor brake - Manual tenoning sliding table - Infeed table extension - Extendable support rail for wide workpieces - Adjustable mitre fence with telescopic extension, rotatable from -45° to +45°, with position stops and anti-splinter wood - Eccentric clamp - Tenoning guard hood with extraction nozzle - Safety devices - Additional emergency stop switch - 3-roller power feeder with stand - Operating manual - Weight 810 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer vretena: 30 mm, dolžina vretena za rezkanje: 140 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 3.000 obr/min, največja hitrost vrtenja: 10.000 obr/min, Spodnji vretenasti rezkar SCM T130E Premer vretena: 30 mm Dolžina vretena: 140 mm Spremenljiva hitrost vretena: 3000/4500/6000/7000/10000 obr/min Moč glavnega motorja: 7,5 kW Elektronska nastavitev višine vretena preko stikala 4-valjni podajalnik Regulacija hitrosti podajanja z variatorjem CE certifikat Tehnična dokumentacija (DTR) Kfjdpoxzyltjfx Ah Aja

Stanje: rabljeno, Leto izdelave: 2001, Price: On request What are Presale items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have any additional details, such as precise dimensions or machine specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. These machines are offered at favorable prices, meaning the prices are lower than usual; however, the risk rests entirely with the buyer. Please carefully review the information in the listing before making a purchase. If you have any questions, feel free to contact us! - Features: - Description: The advertisement placement is not working properly. Price AS-IS - Year of manufacture: 2001 Kedpfx Ahex Ad A So Aefa - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AB/143039 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: rabljeno, Leto izdelave: 1997, številka stroja/vozila: AB/109677, SCM FIXED SPINDLE MOULDER MODEL T130N – CE CERTIFIED – USED - Serial no. AB/109677 Kfsdpfxjwrh Nkj Ah Aoa - Year 1997 - Spindle diameter: 50 mm - Supplied with manual and CE declaration

Stanje: zelo dobro (rabljeno), SCM T 130 N Spodnji vretenasti rezkar Stroj v odličnem tehničnem in vizualnem stanju. Stroj po celovitem pregledu. Italijanski proizvajalec. TEHNIČNI PODATKI: - moč motorja 7,5 kW - premer vretena 30 mm - višina vretena 150 mm - največji premer orodja 350 mm - mehanska nastavitev višine - električna zavora - dimenzije mize 730 x 1200 mm - dve pomožni mizi 410 x 670 mm - višina mize od tal 925 mm Dimenzije stroja: - dolžina 260 cm - širina 110 cm - višina 120 cm - teža 800 kg Kje si lahko ogledate naše stroje? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE VOJV. LUBELSKIE Možnost financiranja stroja preko lizinga ali na obroke. Obiščite našo spletno stran: jbsmaszyny.pl Vabimo vas k preizkusu stroja. Kje si lahko ogledate naše stroje? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport strojev po vsej državi! Kedpfxoxl Dqbe Ah Ajfa Tel: 663 495 647 Deutsch Tel: 664 335 475 English Tel: 530 632 386 English

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkar SCM T130E z agregatom za letev pri steklu Premer vretena: 35 mm Skupna dolžina vretena: 140 mm Kodpfjxbnyrsx Ah Aofa Hitrost vretena nastavljiva preko frekvenčnega pretvornika do 10.000 vrt/min Moč glavnega motorja: 5,5 kW Agregat za izrezovanje steklene letve Moč agregata: 2,2 kW Elektronska nastavitev višine vretena Elektronska nastavitev prislonskih elementov Štirivaljni podajalnik Masterwood Regulacija hitrosti podajanja z variatorjem CE certifikat DTR dokumentacija Leto proizvodnje: 2005

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences Kfedpfxjiiynnj Ah Aoa - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Kjdpexqggcofx Ah Asfa Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. Kjdpstwzyfsfx Ah Ajfa • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Kfjdpfx Aeitvkush Aea Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Kedpfxohtuvre Ah Aefa Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Kfodpfxocrnm Ns Ah Aea Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Kjdpfxod Akygj Ah Ajfa Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, SCM gabbiani p90 Panel Sizing Saw - Demonstration Model - Special Offer! Technical Specifications: Saw blade projection: 90 mm Working table height: 950 mm Number of standard clamps: 5 CUTTING DIMENSIONS: 3300 x 3200 mm Variable saw carriage speed: 6 - 60 m/min Variable pusher speed: 0 - 60 m/min Saw blade motor power: 7.0 kW Speed: 4650 rpm Saw blade diameter: 340 mm Saw shaft diameter (main blade): 80 mm Scoring unit motor power: 1.5 kW Speed: 5850 rpm Scoring blade diameter: 200 mm Scoring blade shaft diameter: 80 mm Compressed air requirement: 300 NL/min Operating pressure: 7.0 bar Ksdpsiz A Amefx Ah Aofa Extraction air requirement: 2440 m³/h Extraction air velocity: 20 m/sec Extraction port diameter: 4 x 120 mm Including the following options: 590134 Cutting depth 3200 mm (Version 33) OF0263 eye-M operator console with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation (without gateway) for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with rollers, located on the longitudinal fence side 590246 Fixed air cushion table 2500x800 mm with rollers and reinforced fan 590239 2 x Movable air cushion tables 1500x600 mm with rollers and reinforced fan 590244 Saw carriage with independent lift control for saw and scoring blades 590245 Optimized vertical lift for the saw blade in 2 stages (medium/maximum) 590143 Grooving unit with manual blade height adjustment 590241 Grooving function (forward/backward movement of the saw carriage) 590164 Double automatic side aligner 301230 Foot switch for cycle start and stop 590044 Compact labeling unit - Label printing with barcode 590144 4 x Additional clamps 900088 Magnetic tape monitoring for pusher position 102015 European safety regulations (CE marking) 109993 MACHINE LANGUAGE: German

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Kfedpfehvan Isx Ah Aoa Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. Kfedpfx Aedd Hi Eeh Asa (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Ksdpfx Aher A Eq Rs Asfa Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Kodjiknp Rspfx Ah Aofa Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. Kfjdpfx Ascuwptsh Asa – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Kfedpfx Asd Akyzoh Aja Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces