Tračna žaga
MEP SHARK 382-1 SXI EVO

Stanje

Novo

Lokacija

Wien

Prikaži karto

Podatki o stroju

Oznaka stroja:: Tračna žaga

Proizvajalec:: MEP

Model:: SHARK 382-1 SXI EVO

Stanje:: novo

Cena in lokacija

Lokacija:: Werk

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21556718

Referenčna številka:: 1123-5010818

Posodobitev:: nazadnje dne 20.03.2026

Opis

Cutting capacity at 90°: round 300 mm
Cutting capacity at 90°: square 250 mm
Cutting capacity at 90°: flat 380x250 mm
Cutting capacity at 45° left: round 260 mm
Cutting capacity at 45° left: square 250 mm
Cutting capacity at 45° left: flat 300x200 mm
Cutting capacity at 60° left: round 180 mm
Cutting capacity at 60° left: square 170 mm
Cutting capacity at 60° left: flat 200x170 mm
Cutting capacity at 45° right: round 240 mm
Cutting capacity at 45° right: square 210 mm
Cutting capacity at 45° right: flat 280x160 mm
Saw blade dimensions 3770x27x0.9 mm
Vice opening 385 mm
Blade speed 40/80 m/min
Total power 1.5/1.8 kW
Weight 695 kg
Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic and manual functions. Equipped with MEP-30 control for mitre cuts from 45° right up to 60° left. The MEP 30 is the latest generation controller.

Semi-automatic function:
- Vice closes and motor starts
- Saw head descends for cutting
- Motor switches off
- Saw head lifts
- Vice opens

Semi-automatic dynamic system:
- Manual lowering of the saw bow to the desired position
- Cycle start via push-button
- Upper position is automatically stored

Main features:
- Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar)
- Electronic machine control with next-generation micro-controller
- Electrical system centralised in the main control cabinet
- Alarms, diagnostics and machine function display (cutting time, number of pieces cut, saw band motor load, saw head position, band speed, band tension)
- Manual/semi-automatic/dynamic operation as standard

Additional features:
- Low-voltage control panel: polyester membrane keypad with thermoformed, raised buttons and confirmation control signal
Cjdpfsyv Ntrex Ahxerb
- Manual 24 V cycle selector handle, IP55
- Complete program with all special cutting cycles
- New low-energy hydraulic control unit. Stand-by operation
- 420 mm turntable mounted on roller bearings with preloaded thrust bearing, equipped with replaceable steel worktable
- Saw bow stroke can be programmed directly from the control panel for adapting to the workpiece material
- Clamping device laterally adjustable left and right, with quick-release vice
- Manual blade tension control with on-screen display via electronic transducer

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2026

169 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 8221 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Tračna žaga - vodoravna MEP SHARK 382-1 SXI EVO

Velen

867 km

Tračna žaga - vodoravna
MEPSHARK 382-1 SXI EVO

Pokliči

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Codpfxefg E Ias Ahxerb Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Poglej podrobnosti

Mali oglas

Teleskopski nakladalnik Manitou MT 1840 Teleskoplader 17,55m

Holzheim

411 km

Teleskopski nakladalnik
ManitouMT 1840 Teleskoplader 17,55m

38.900 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), vrsta goriva: dizel, dvižna višina: 17.600 mm, konfiguracija osi: 4x4, Leto izdelave: 2012, obratovalne ure: 3.785 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Unladen weight: 11,010 kg Engine make: Perkins Lifting capacity: 4,000 kg CE marking: yes Technical condition: good Visual condition: good Transport dimensions (L x W x H): 6.30 m / 2.42 m / 2.50 m Contact Tobias Mayr for further information. = Additional options and equipment = - Pallet fork - Additional hydraulics = Notes = Manitou 17.55 m telescopic handler from German rental fleet Manufacturer: Manitou Model: MT1840 E3 Year of manufacture: 2012 Operating hours (read): 3,785 hours Net weight: approx. 11,010 kg Max. lifting height: approx. 17.55 m Max. side reach: 13.08 m Max. load capacity: 4,000 kg Perkins diesel engine All-wheel steering with 3 steering modes Joystick control with pallet fork Road registration: 20 km/h Cedpfeynrmdex Ahxsrb Dimensions (L x W x H): 6.30 m / 2.42 m / 2.50 m Other: Affordable Europe-wide delivery possible. Viewings by appointment only. Trade-in of your equipment / construction machinery possible. We are happy to offer you a customized finance or leasing solution (for business customers only). If you have any questions, please contact us. All prices ex location 86684 Holzheim. All information is subject to change. Alterations, printing and transmission errors, and prior sale are reserved. All details regarding color, equipment, condition, features, etc. of the vehicles offered are non-binding. Subject to typing errors/mistakes/prior sale.

Poglej podrobnosti

Mali oglas

Tračna žaga MEP - Halbautomat SHARK 382-1 SXI evo

Ahaus

879 km

Tračna žaga
MEP - HalbautomatSHARK 382-1 SXI evo

Pokliči

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Cutting capacity at 45 degrees, flat: 300 x 200 mm Cutting capacity at 45 degrees, round: 260 mm Cutting capacity at 45 degrees, square: 250 x 250 mm Cutting capacity at 60 degrees, flat: 200 x 170 mm Cutting capacity at 60 degrees, square: 170 x 170 mm Cutting capacity at 60 degrees, round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Space requirement approx. 1647 x 2157 mm Weight: 720 kg Credpsxaax Dofx Ahxsb Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotating table - MEP EVO microprocessor control for monitoring all machine functions * Swivels, mounted front right - Optional manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering speed - Carbide blade guides - Hydraulic blade tensioning, incl. digital value display - 2 blade speeds - 1 BI-Metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Poglej podrobnosti

Mali oglas

Günzburg

439 km

Tračna žaga
MEPShark 320 AXI

Pokliči

Stanje: rabljeno, Leto izdelave: 1997, Dimenzije tračne žage: 3150 x 25,4 x 0,9 mm 2 hitrosti: 20/40 m/min Rezanje pri 90 stopinjah: okroglo 260 mm Crjdpfoyyc A Iox Ahxeb Rezanje pri 90 stopinjah: kvadratno 250 mm Rezanje pri 90 stopinjah: ploščato 320 x 200 mm Rezanje pri 45 stopinjah: okroglo 230 mm Rezanje pri 45 stopinjah: kvadratno 210 mm Rezanje pri 45 stopinjah: ploščato 240 x 200 mm Dodatki: -Set tračnih žag

Poglej podrobnosti

Mali oglas

Tračna žaga MEP - Halbautomat SHARK 332-1 SXI EVO / MDE

Ahaus

879 km

Tračna žaga
MEP - HalbautomatSHARK 332-1 SXI EVO / MDE

Pokliči

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: Crjdpfoxaagbex Ahxob - MEP LubeCut micro-dosing unit

Poglej podrobnosti

Mali oglas

Cantù

455 km

Odrezovalna žaga
CIMAN - ITALYMATA 450

Pokliči

Stanje: dober (rabljeno), Koda: 0340 Znamka: CIMAN - ITALIJA Model: MATA 450 - CE standard Avtomatska enoglava prečna žaga z dvojnim kotnim rezanjem za aluminij, v kompletu z valjčnimi transportnimi trakovi na desni in levi strani – CE standard. Tehnični podatki: Premer žaginega lista: 450 mm, luknja 32 mm Motor: 3 Hp – 2800 obr/min Dimenzije reza: pri 90° – 90 x 190 mm, pri 45° – 90 x 125 mm Pritrditev profila, mazanje žaginega lista in podajanje so pnevmatski Crsdjyv Il Hepfx Ahxeb Dvojna rotacija glave +/- 22,5°–45°–90° preko pnevmatskega cilindra Hitrost podajanja pri rezanju je nastavljiva preko oljne zavore Komplet vsebuje podstavek in 2 stranski mizi – 3 metre na levi in 4 metre na desni z nastavljivim naletom Opremljena tudi s posebnim kotomerom za rezanje vmesnih kotov Premer priključka za odsesavanje: 100 mm Pritisk komprimiranega zraka: 6–7 bar Skupne dimenzije: Stroj 1200 x 1500 x 1500 mm, levi valjčni transporter 3000 x 200 mm, desni valjčni transporter 4000 x 200 mm Dimenzije za transport: Stroj 1200 x 1500 x 1500 mm, 2 valjčna transporterja 4000 x 200 x 300 mm (h) Teža: 530 kg

Poglej podrobnosti

Mali oglas

Wien

254 km

Tračna žaga
MEPShark 512 SXI EVO

Pokliči

Stanje: novo, Bandsaw blade dimensions: 4640x34x1.1 mm Credpfxjyv Nkks Ahxob 2 speeds: 15-100 m/min Vice opening: 515 mm Cutting capacity at 90°: square 320 mm Cutting capacity at 90°: round 330 mm Cutting capacity at 90°: flat 510x320 mm Cutting capacity at 45° left: round 320 mm Cutting capacity at 45° left: square 320 mm Cutting capacity at 45° left: flat 350x320 mm Cutting capacity at 60° left: round 230 mm Cutting capacity at 60° left: square 230 mm Cutting capacity at 60° left: flat 230x310 mm Cutting capacity at 45° right: round 320 mm Cutting capacity at 45° right: square 320 mm Cutting capacity at 45° right: flat 380x320 mm Cutting capacity at 60° right: round 250 mm Cutting capacity at 60° right: square 250 mm Cutting capacity at 60° right: flat 250x320 mm Total power requirement: 4 kW Weight: 1,190 kg Machine dimensions: 2000x1200x1800 mm Electrohydraulic, semi-automatic bandsaw with MEP 30 control for miter cuts from 0° to 60° left. MEP 30 represents the latest generation of control systems. Semi-automatic operation: - Vice closes and motor starts - Saw head descends to perform the cut - Motor stops - Saw head rises – vice opens Key features: - Hydraulic unit with high-efficiency solenoid valve and high-pressure hydraulic pump (200 bar) - Electronic control of the machine with new generation microcontroller - Electrical system centralized in main control cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, bandsaw motor load, saw head position, blade speed, blade tension)

Poglej podrobnosti

Mali oglas

Wien

254 km

Tračna žaga
ZIMMERZ 185-1/R

Pokliči

Stanje: novo, Band saw blade dimensions: 2085x20x0.9 mm Cutting capacity at 90°: round 185 mm Cutting capacity at 90°: square 150x150 mm Cutting capacity at 90°: flat 220x150 mm Cutting capacity at 45° right: round 110 mm Cutting capacity at 45° right: square 100x100 mm Cutting capacity at 45° right: flat 110x90 mm Cutting capacity at 60°: round 70 mm Cutting capacity at 60°: square 70x70 mm Cutting capacity at 60°: flat 70x70 mm Voltage: 230 V Band saw speed: 30–75 m/min Vice opening: 230 mm Total power requirement: 2.35 kW Machine weight approx. 200 kg Space requirement approx. 1280x550x1480 mm The Zimmer Z185/R is a semi-automatic lowering saw designed for mitre cuts from 0° to 60° left. After the cut, the machine stops automatically via a safety limit switch. The feed rate is continuously adjustable via a hydraulic system. Manual lifting of the saw arm after the cut can be performed at any position; the saw arm will stay in the desired position. Csdpfx Ahsyv Nfzjxorb Equipment features: - Optional hydraulically controlled or manual saw arm feed - Saw arm swivels up to 60° to the right - Quick-release vice - Saw blade guide with 8 ball bearings - Hydraulic band tensioning, tension indicator, and blade breakage cut-off - Including coolant system - Including machine base cabinet

Poglej podrobnosti

Oglašujte tukaj