Mep Tiger 350 Sx nakup rabljenega (115)

Stanje: rabljeno, Leto izdelave: 1990, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Cutting range at 90°: square 95 mm Cutting range at 90°: flat 180 x 95 mm Cutting range at 45°: round right & left 110 mm Cutting range at 45°: square right & left 95 mm Cutting range at 45°: flat right & left 125 x 95 mm Cutting range at 60°: round 90 mm Pedjwvl E Ropfx Agpord Cutting range at 60°: square 80 mm Cutting range at 60°: flat 90 x 95 mm Cutting speed: 15 - 90 m/min Total power requirement: 2.5 kW Machine weight: approx. 400 kg Space requirement: approx. 1000 x 950 x 1800 mm Features: - with mitre adjustment 60° left / 45° right - machine base frame

Leto izdelave: 1989, Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Psdoi Df D Aepfx Agpjrd Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.6 kW Machine weight: approx. 0.41 t Space requirement: approx. 0.8 x 1.0 x 1.85 m Semi-automatic cold circular saw

Stanje: rabljeno, Leto izdelave: 2000, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Stroke: 100 mm Cutting capacity at 90° (square): 95 mm Cutting capacity at 90° (flat): 180 x 95 mm Cutting capacity at 45° (round, right & left): 110 mm Cutting capacity at 45° (square, right & left): 95 mm Cutting capacity at 45° (flat, right & left): 125 x 95 mm Cutting capacity at 60° (round): 90 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (flat): 90 x 95 mm Cutting speed: 15 / 30 / 45 / 90 m/min Total power requirement: 2.6 kW Machine weight approx.: 375 kg Space requirement approx.: 1,000 x 950 x 1,800 mm Equipment: - Mitre adjustment 60° left / 45° right - Coolant system - 2 speeds - Machine base - Operating manual Psdpov Rrrusfx Agpjrd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO Prjdpexdr Rtjfx Agpsd - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Predsfg Rlbopfx Agpjd Total power requirement: 1.8 / 2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with vertically guided head sliding on linear guides with ball recirculating rails in the front. - Double gearbox for high transmission power - 4 speeds: 15 / 30 / 45 / 90 rpm - Vice opening: 190 mm - Stroke movement of the saw head programmable directly from the control panel to adjust for cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material - Vice with counterhold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical cuts - Material support arm, also suitable for connection to roller conveyor / loading side - Turntable with additional central axis

Stanje: rabljeno, Leto izdelave: 1995, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Cutting diameter: 115 mm Stroke: 100 mm Cutting capacity at 90° (square): 95 mm Cutting capacity at 90° (flat): 180 x 95 mm Cutting capacity at 45° (round, right & left): 110 mm Cutting capacity at 45° (square, right & left): 95 mm Cutting capacity at 45° (flat, right & left): 125 x 95 mm Cutting capacity at 60° (round): 90 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (flat): 90 x 95 mm Cutting speed: 15 – 90 m/min Total power requirement: 2.6 kW Machine weight approx.: 375 kg Space required approx.: 1000 x 950 x 1800 mm Pedpevxlpvjfx Agpord Equipment: - mitre adjustment 60° left / 45° right - coolant system - two speeds - machine base - operating manual

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush Podpfxofg Rldo Agpord • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: rabljeno, Leto izdelave: 2004, Cutting diameter: 120 mm Saw blade diameter: 370 mm Vice width: 190 mm Cutting capacity at 90 degrees, flat: 180 x 95 mm Cutting capacity at 45 degrees, round: 110 mm Cutting capacity at 45 degrees, flat: 125 x 95 mm Cutting capacity at 60 degrees, round: 90.0 mm Cutting capacity at 60 degrees, flat: 90 x 95 mm Saw blade dimensions: 370 x 32 x 2.5 mm Cutting speed: 15 - 150 m/min Motor power: 3.0 kW Weight: 640 kg Dimensions (L x W x H): 900 x 1500 x 1910 mm Pjdpoxabrxjfx Agpjrd Original price approx. €16,000 - Machine in checked/inspected condition - machine video available - ?v=gxj5GWtTcDE Equipment: - Semi-automatic vertical metal circular saw - Mitre adjustment: 60° left / 45° right - Swiveling operator panel, front left - Saw head runs on linear double guideways - Pneumatic vice clamping - Stepless pneumatic saw blade feed - Infinitely variable saw blade speed adjustment - 2x spare saw blades - Machine base with coolant system - Operating manual

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90.0 mm Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control system: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Equipment / Description: - NC electro-pneumatic semi-automatic (INDUSTRIAL) * suitable for cuts from 45° right to 60° left - MEP NC control with soft-touch keyboard * backlit display - Saw head guided on preloaded linear guides on a robust cast steel column - Powerful 2-speed gearbox designed specifically for solid material cutting - Four blade rotation speeds available for optimal adaptation to the material - Large, ball-bearing rotary table with internal table clamping & precision stops at 0/45/60° for fast adjustment for miter cuts - Pneumatic vice equipped with bolted jaws, providing optimum workpiece clamping thanks to the ribbed surface - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual Prjdpsxabd Isfx Agpod - Wiring diagrams and exploded drawings - Lifting eyes for transport * Machine is supplied without saw blade

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, lightly used Prodpexnpggofx Agpsd Operating hours: 2128 h Cutting time: 1738 h Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 x saw blades

Stanje: novo, Saw blade diameter 350 mm Pedpfxjfgpdls Agpjrd Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. Prodpfxolf Tu Us Agpjd With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw Article number: MEP SHARK 350 NC HS 5.0 Motor power: 4.0 kW Table opening: 355 mm Blade dimensions: 4640 x 34 x 1.1 mm Weight: 2,800 kg Speed: 15 – 115 m/min, stepless Cutting capacity 0°: 350 / 350 x 350 mm Cutting capacity 45° right: Cutting capacity 45° left: Cutting capacity 60° right: Cutting capacity 60° left: Description: Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Psdoi Hmcdspfx Agpjrd Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology. Standard features include: - Powered swarf conveyor, installable on the right or left side of the machine - Vise clamping pressure regulation - Feeder with vertical rollers for lateral material support - Clamping pressure regulation - Storage for 100 programs - Machine available with 34 mm or 41 mm blade—no extra charge

Stanje: novo, Cutting diameter: 350 mm Saw blade length: 4640 x 34 x 1.1 mm Cutting width: 350 mm Prsdpfxjwu Hhde Agpjd Control: NC 5.0 Band speed: 15 - 100 m/min Cutting range at 0 degrees, round: 350 mm Cutting range at 0 degrees, square: 350 x 350 mm Table height: 860 mm Total power requirement: 4 kW Machine weight approx. 2.8 t Shark 350 NC 5.0, automatic hydraulic band saw in double-column design for 0° cuts up to maximum 350x350 mm. Standard equipment includes: - Driven chip conveyor, can be installed on either side of the machine - Clamping pressure regulation for the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated semi-automatically, featuring the new MEP 50 control system, developed by MEP specifically for automatic machines, Windows "CE" based - "Clean Cut" cycle: the feeder pushes the workpiece back to avoid scoring at the cut surface when the blade rises again at the end of the cut - Fieldbus communication system with dual microprocessor and serial connection - User interface with 7” touchscreen and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters Scope of supply: - Shark 350 NC/CNC HS comes as standard with swarf conveyor - Bi-metal saw band, tool kit - Mounting adapter for infeed roller conveyor - Material chute for removal of short offcuts - Forklift/pallet truck access Machine available from stock, subject to prior sale

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw Year of manufacture: 2019 Condition: used, very good, tested and cleaned Operating hours: 1750h Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Prodpfx Aexnpf Asgpjd Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable cutting speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Pjdpfx Agsfg Rlcepord Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Predpfxjxaa Hns Agpjd Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1700 / 3400 rpm Controller: MEP NC Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1240 x 1360 x 1800 mm Features: - NC semi-automatic high-performance circular saw * for cuts from 45° right to 45° left * suitable for aluminium and light metal alloys - MEP microprocessor control * user-friendly interface with display and mechanical buttons * saw head start and end positions can be stored - Manually operated safety guard - Mechanical stops at -45°, +0°, +45° * enable rapid positioning of the saw head - Pneumatic quick-release vice * pneumatic clamping system allows adjustment of clamping pressure * pressure depends on the hardness of material being cut * optional pneumatic vertical vice available - Heavy cast iron construction ensures vibration-free operation and high precision - Saw head can be tilted up to 45° additionally - 2 saw blade speeds - Machine base with lockable door - Pneumatic coolant-lubrication system - Machine base Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Adapter for feed roller conveyor, incl. 1 support roller - Tool kit - Comprehensive operating instructions, maintenance manual, etc. - Machine is supplied without saw blade!

Stanje: novo, MEP TIGER 372 CNC LR 4.0 Article Number: TI372CNCLR Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Description: Electromechanical vertical circular saw with semi-automatic operation, designed for use with HSS saw blades to perform precision cuts from 45° right to 60° left. Equipped with multi-micro processors and two controlled axes, allowing programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm length) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush - Machine prepared for pallet truck transport, includes tools and operating manual Electrical Equipment: - Control panel - Programmable for 80 different cutting programs - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle, protection class IP 55 - 24V low-voltage system - Electric coolant unit for blade lubrication and cooling (option for micro-spray system) - Motor 4.0 kW - 400V MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Article Number: TI372CNC LR 4.0 RC Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Description: Automatic electromechanical vertical circular saw for use with HSS saw blades, designed to execute series cuts with automatic mitre adjustment between -45° and +45° on steel. In semi-automatic cycle, mitre cuts between -45° and +60° can be made. Equipped with multi-micro processors and two controlled axes, enabling programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Prsdschkyropfx Agpjd Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush Electrical Equipment: - Control panel - Programmable for 80 different cutting programs - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage rele

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Pedpfofm T Hbex Agpsrd Price on request.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 95 x 95 mm Cutting capacity at 90 degrees: flat 180 x 95 mm Cutting capacity at 45 degrees: round 110 mm Cutting capacity at 45 degrees: square 95 x 95 mm Cutting capacity at 45 degrees: flat 125 x 95 mm Cutting capacity at 60 degrees: round 90.0 mm Cutting capacity at 60 degrees: square 90 x 90 mm Cutting capacity at 60 degrees: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Prodpfsxaab Ssx Agpod Machine weight: approx. 375 kg Dimensions L-W-H: 1000 x 1100 x 1870 mm Features / Description: - Manual high-performance vertical circular saw - For cuts from 45° right to 60° left - The saw head runs on preloaded linear guides mounted to a robust cast steel column - Heavy-duty two-stage gearbox specifically designed for solid material cutting - Four available blade speeds for optimal adaptation to the material - Large, mounted rotary table with internal table clamping and precision end stops at 0/45/60° for rapid adjustment of miter cuts - Quick-release vise equipped with bolted jaws - Serrated jaws for optimal workpiece grip - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions and maintenance manual - Circuit diagrams and exploded views - Crane lugs for transport * Machine is supplied without saw blade

Stanje: novo, MEP TIGER 352 NC 5.0 [Fully Automatic] Article Number TI352NC Motor Power 3.0 kW Vise Opening 190 mm Blade Dimensions 350x32x2.5 mm Weight 680 kg Blade Speed 15 - 90 m/min Cutting Capacity 0° 115 / 95 / 180x95 mm Cutting Capacity 45° Right 110 / 95 / 125x95 mm Cutting Capacity 45° Left Cutting Capacity 60° Right Cutting Capacity 60° Left Description Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, enabling series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP control system, allowing up to 1,000 different cutting programs, each with individual cutting length and piece quantity for consistent material thickness. FEATURES: - New centralized control console on an articulated arm, so the operator can easily reach the emergency stop button from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial port. - Display with 20 characters x 4 lines to show the following technical parameters: + Blade speed + Number of programmed and completed cuts + Blade thickness + Feed length + Cutting time + Amperemeter + Display of over 100 diagnostic messages and alerts - NEW: Display and entry of alarm and error messages, with the option to view occurred incidents. - NEW: 600 mm material feed with stepper motor and ball screw, mounted on opposing ball bearings. - NEW: Electronic inverter for continuous blade speed adjustment from 15 to 90 rpm (optional 30 to 150 rpm). - NEW: Low-voltage control panel: Polyester membrane keypad with thermoformed and raised tactile buttons and operation confirmation signal. - Dual gear set for high sawing performance. - The saw head slides on linear double ball recirculation guides. - Coaxial cylinder with bypass valve for rapid approach and a potentiometric linear transducer for detecting head position. - Stroke of the saw bow programmable directly from the control panel for adaptation to the cutting material. - Adaptive cutting force control. - Swivel table with central pin and axial bearing for precise execution of miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. Prjdpochhhdjfx Agpod - Chip removal brush. - Signaling lamp for program end or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm for solid and profile material. - Prepared for the installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. Psdjfg E Hzspfx Agpsrd + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, MEP COBRA 352 SX evo [Semi-Automatic] Article number: CB352SX Motor power: 1.5/2.2 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 mm Weight: 285 kg Speed: 1700 / 3400 rpm Cutting capacity at 0°: 120 / 105 / 180x70 mm Cutting capacity at 45° right: 120 / 100 / 135x60 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Semi-automatic circular saw designed for cutting solid and hollow aluminium materials and light metal alloys using an electro-welded carbide-tipped blade. Standard features: - Machine suitable for mitre cuts from 45° right to 45° left. - The vertical alignment allows for cutting operations with the head tilted between 0° and 45° to the left. - *MEP offers the latest generation of microprocessor-based controls designed for semi-automatic machines with single-axis control. - FEATURES: At cycle start: – the vice closes and the motor starts – the saw head lowers for cutting – the motor stops – the saw head lifts – the vice opens. - New – Display with 16 characters x 2 lines showing the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Display of over 100 diagnostic notifications and warnings - New – Indication and logging of alarms and error messages with the ability to review incidents that occurred. Electrical equipment: - New – Low-voltage switch panel: polyester membrane keyboard with thermoformed and raised buttons and activation control signal. - Saw bow stroke fully programmable from the control panel to be adapted to the workpiece. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system using two face-mounted vices, which can be positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for quick head positioning at 0° and 45° right and left. - Chip conveyor ready for OPTIONAL extraction system. - Automatic blade lubrication system, only active at the beginning of the cut. - Machine is supplied without saw blade. - Prepared for installation of the optional minimum-quantity lubrication system for the saw blade, in addition to the standard emulsified oil lubrication system. Psdpschkv Iofx Agpjrd - Supplied with tools and instruction manual including spare parts list. For further technical data, please refer to the attached PDF document. Catalogue page 2!

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m Podpfxohpktyo Agperd TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Prodpfx Asfc T Ugogpsd Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120 mm Cutting range at 45 degrees: square 100 mm Cutting range at 45 degrees: rectangular 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminum materials and light metal alloys, equipped with an electro-welded, carbide-tipped saw blade. Machine designed for miter cuts from 45° right to 45° left. Thanks to the adjustable vertical orientation, it is possible to perform cutting operations with a head inclined between 0° and 45° to the left.