Krožne žage za hladno rezanje – polavtomatske – premer žaginega lista 0–350 mm nakup rabljenega (42)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih Djlhcsxdr Rtocqmswd - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device Delhjt A Ar Soccqmswd - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Cold circular saw with 40 hours of operation, like new Dwjlhcsvxr H Iecqmod

Stanje: rabljeno, Leto izdelave: 1989, - pnevmatski pomik (brezstopenjski) - pnevmatska pritrditev obdelovanca - rezanje pod kotom ± 45 ° - hladilna naprava - letnik izdelave 1989 - zmogljivost rezanja okroglo: 120 mm - zmogljivost rezanja plosko: 200 x 90 mm - zmogljivost rezanja kvadrat: 90 mm - zmogljivost rezanja polni material: 100 mm - zmogljivost rezanja pod kotom: 140 x 110 mm - maksimalni premer žaginega lista: 350 mm - obrati: 17 / 34 min⁻¹ - moč motorja: 2,6 kW - obratovalna napetost: 400 V - mere ŠxVxG: pribl. 950 x 1900 x 1100 mm Dslhcexdxp Ascqmjwd - teža: pribl. 450 kg

Stanje: rabljeno, Leto izdelave: 1999, Maksimalni premer reza: 400 mm z žaginimi listi. Teža stroja cca 1,4 t. Dolow Sygmohccqmjwd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, BIMAX TA 91 Circular Sawing Machine (Automatic Cutter) TECHNICAL DATA Total Power Requirement, Three-phase Current: 3 x 400 V For Pneumatic Equipment: 3 kW For Hydraulic Equipment: 3 kW Main Circuit Breaker (to be provided by customer): 16 A (slow-blow) Power Supply: 4 x 2.5 mm², 3P + E (three-phase plus earth) Air Connection: Diameter: 12 mm Supply Pressure: 8 – 10 bar, 40 l/min Operating Pressure: 6 bar Spindle Drive via Three-phase Motor: B5-100S 4/2-pole, Dahlander circuit: 1420 / 2840 rpm Power: 1.8 / 2.5 kW Saw Blade Arbor: 32 mm Drive Pin Diameter: 8 mm Drive Pin Pitch Circle: 45 mm Cutting Disc Arbor: 22 mm Saw Blade Size: 160 x 1 to 300 x 2 mm Feed-through Range: - Round material up to 65 mm - Square material up to 55 x 55 mm - Rectangular material up to 80 x 50 mm Standard Clamp Jaw for diameters: 10 – 60 mm Material Feed Length: 0 – 250 mm Weights: - Saw: 500 kg - Hydraulic system: 120 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided. Dwjlhjv I Dmljccqmjd

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Dwslhowmzfzjccqmsd Price: €4,200 Saw blade diameter: 315 mm Saw blade dimensions: 315x32x63 mm Saw blade speed: 45 / 90 rpm Mitre cuts left: 45° Mitre cuts right: 45° Cutting capacity 0° round: 105 mm / square Cutting capacity 45° right round: 90 mm / square Cutting capacity 45° left round: 90 mm / square Motor: 1.3 / 1.8 kW Width: 600 mm Depth: 1000 mm Height: 1400 mm Weight: 200 kg Manual vise Robust double joint Low-voltage start/stop switch integrated in handle Mitre cuts 45 degrees left and right Divided vise (clamps before and after the saw blade) Saw blade not included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1966, I am selling a German-made circular saw, Eisele brand, model VMS II, in good condition. Dwjlhccovbwfnsqmod

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Dwolhccofgyh Toqmjd Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-miter metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support surface - Automatic coolant system

Stanje: dober (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 350 mm, največja hitrost vrtenja: 35 obr/min, Hladna krožna žaga Eisele VMSIII-PV 038 Leto izdelave: 1977 z valjčno progo 1,6 m hladilna naprava s črpalko Žagin list 315 mm Elektrika 400V 16A Moč motorja 2 / 2,6 kW Avtomatsko zaporedje: zapiranje primeža, dol/gor, odpiranje primeža Potrebujete stisnjen zrak 4-6 bar za pnevmatiko Možni poševni rezi 30-90° Število obratov: 17 in 34 obr/min Maks. premer žaginega lista 350 mm Dwelhcsvv Nvzocqmed Teža pribl. 550 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 2038, Offer 24272 Delhcot H Ibmecqmjwd Technical Data: - Saw blade dimensions: 300 mm - Saw blade speed: 2,800 rpm - Cutting capacity: - at 90°: 160 x 20 mm 100 x 80 mm - at 45°: 100 x 40 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 400 x H 800 x D 600 mm - Weight: approx. 80 kg - Table stand: W 900 x H 750 x D 500 mm

Leto izdelave: 1969, Stanje: dober (rabljeno), številka stroja/vozila: 1130, Saw blade diameter: 315 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 100 x 60 mm Cutting speed: 17/34 m/min Drive motor: 380 V, 1.8/2.6 kW Space requirement: 1200 x 860 x 1850 mm Weight: 720 kg Dwslhcced Rxw Soqmjd

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €4,500 Saw blade diameter: 315 mm Saw blade dimensions: 315x32x63 mm Saw blade speed: 45 / 90 rpm Cutting capacity at 0°: round 105 mm / square Cutting capacity at 45° right: round 90 mm / square Motor: 1.3 / 1.8 kW Width: 600 mm Depth: 1,000 mm Height: 1,400 mm Weight: 200 kg Pneumatic vice Low-voltage start/stop switch integrated in the handle Dwolhccjwmzfueqmed Mitre cuts at 45 degrees left and 45 degrees right Split vice (clamps before and after cutting blade) Self-centering vice for optimal cutting position Large base frame for high stability Saw blade not included

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting diameter: 90 mm Stroke: 160 mm Mitre cuts: both sides ± 45° Operating voltage: 380 V Machine weight: approx. 350 kg Space requirement: approx. 0.80 x 0.85 x 1.35 m - Factory No.: 4296 - Pneumatic feed Dolhcced Il Azsqmjwd - Coolant system

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! Dolhccqsfg E Hlsmewd 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3515 104 114, premer žaginega lista: 350 mm, Razpon rezanja okroglega jekla pri 45°: 100 mm, Obseg rezanja okroglega jekla pri 90°: 100 mm, skupna dolžina: 800 mm, skupna širina: 1.250 mm, skupna masa: 350 kg, Območje rezanja kvadratnega jekla pri 90°: 90 mm, Stroj KASTOdisc U 10 je robustna polavtomatska vertikalna hladna krožna žaga, primerna za natančno rezanje kovin v delavnicah in srednjih serijah. Z dvema hitrostma in nastavljivim podajalnikom omogoča prilagodljivost in visokokakovostne reze, medtem ko pnevmatski prijem stabilizira material. Dwelhccjwxcuzoqmed

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 3514101038, Offer 24534 Technical Specifications: - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum vice opening width: 185 mm - Cutting capacity with saw blade diameter 350 mm: - at 90°: round up to 100 mm Dwslhccqswp E Tbjmod flat up to 170 x 90 mm - at 45°: round up to 95 mm flat up to 125 x 90 mm - Mitre adjustment: left up to 60° / right up to 45° - 2 saw blade speeds: 36 / 72 rpm - Drive: 400 V / 1.8 / 2.4 kW - Coolant system - Space requirement: approx. W 700 x H 1700 x D 800 mm - Weight: approx. 450 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, High-performance universal metal circular saw automatic machine Djlsvxkc Iehccqmjwd Circular saw - automatic Eisele PSU 450 CNC 2 Saw blade diameter: 450 mm Cutting diameter: 150 mm Mitre cuts – all positions +/-45° Saw motor: 3.6 kW

Stanje: novo, Leto izdelave: 2025, Condition: new Year of manufacture: 2025 Stock number: 060103 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €7,500 Leasing rate: €121.59 In stock: 1 Dslhccewmf Uasqmewd Special price: €6,300 Saw blade diameter: 350 mm Saw blade dimensions: 350x32x63 mm Saw blade speed: 45 / 80 rpm Mitre angle left: 45° Mitre angle right: 45° Cutting capacity 0° round / square: 115 mm Cutting capacity 45° right round / square: 110 mm Cutting capacity 45° left round / square: 110 mm Motor: 1.8 / 2.2 kW Width: 1,100 mm Depth: 1,000 mm Height: 1,400 mm Weight: 300 kg Semi-automatic circular saw High production performance, ideal for individual parts and small batches Heavy-duty gearbox Cast iron housing Foot switch Hydropneumatic saw head feed for consistent lowering and optimal cutting guidance Pneumatic vice 2 cutting speeds Adjustable saw head stroke to suit the dimensions of the material to be cut Piece counter Mitre 45° right to 45° left Saw blade not included OPTION: Saw blade Dm. 350 mm €180.00

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 352 NC EVO, Automatic circular saw with semi-automatic function, suitable for cutting aluminium and light metal alloys, designed for the use of carbide-tipped circular saw blades. Includes extraction system and material handling (roller conveyors). Dwolhccqev T U Tgjmjd The machine is capable of mitre cuts from 45° right to 45° left. By tilting the head along the vertical axis, it is possible to perform sawing operations with the head inclined between 0° and 45° to the left.

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Dolhccqjd Iipmemswd Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens

Stanje: rabljeno, Leto izdelave: 1985, Saw blade dimensions Ø 320-350 x 3.0 mm Cutting range 120 mm Cutting range at 90 degrees: square 90 x 90 mm Cutting range at 90 degrees: flat 200 x 90 mm Cutting range at 45 degrees: flat 140 x 90 mm Working height 925 mm Saw blade speeds 17 / 34 rpm Compressed air 6.0 - 8.0 bar Motor speed 1400 / 2800 rpm Total power requirement 2.0 / 2.6 kW Weight 470 kg Dwslhsxacbnsccqmsd Dimensions L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) Well-maintained condition (!!) Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-release clamping device - Infinitely adjustable saw blade feed - Convenient mitre adjustment with fixed stops - Convenient lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade replacement - High productivity with minimal space requirement (less than 1 m²) - Coolant system * Machine link: ?machineno=1008-9164094

Stanje: rabljeno, Cutting diameter: 320 mm Saw blade length: 4570 x 27 x 0.9 mm Table height: mm Cutting width: 450 x 280 mm Drive power: 4.0 kW Cutting speed: 15 - 105 m/min Motor: 380 V Total power requirement: 4.0 kW Machine weight: approx. 0.8 t Space requirement: approx. 1.8 x 0.8 x 1.2 m Dwjlhcevn U D Ujcqmjd Semi-automatic band saw featuring: - Coolant system - Mitre cutting device

Stanje: rabljeno, Leto izdelave: 1998, Saw blade dimensions: 350 x Ø 40 x 3 mm Cutting range: 120 mm Cutting range at 90°: square 100 x 100 mm Cutting range at 90°: flat 170 x 100 mm Cutting range at 45°: round 120 mm Cutting range at 45°: square 95 x 95 mm Cutting range at 45°: flat 120 x 100 mm Cutting range at 60°: round (RE) 100 mm Cutting range at 60°: square (RE) 85 x 85 mm Cutting range at 60°: flat (RE) 85 x 100 mm Working height: 900 mm Saw blade speeds: 17 / 34 rpm Air pressure: 6.0 – 8.0 bar Total power requirement: 1.4 / 1.9 kW Weight: 340 kg Dimensions (L-W-H): 1010 x 765 x 2175 mm Features: - Semi-automatic vertical cold circular saw - Pneumatic quick-clamping device - Infinitely variable saw blade feed adjustment - Convenient mitre adjustment - User-friendly saw unit lifting adjustment via clamping lever - Large-dimensioned gear unit - With Eisele rotation compensation for long saw blade service life - Easy saw blade change - High productivity with minimal footprint (less than 1 m²) - Machine base - User manual (PDF) Machine equipped with brand new replacement parts (installed): 1x Pneumatic/hydraulic double-acting cylinder D80 stroke 190 for saw blade lowering 1x Gas spring stroke 100 D23 F=800N for safety cover Dwolhccqsxabk Usmsd

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90.0 mm Delexabd Iehccqmswd Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control system: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Equipment / Description: - NC electro-pneumatic semi-automatic (INDUSTRIAL) * suitable for cuts from 45° right to 60° left - MEP NC control with soft-touch keyboard * backlit display - Saw head guided on preloaded linear guides on a robust cast steel column - Powerful 2-speed gearbox designed specifically for solid material cutting - Four blade rotation speeds available for optimal adaptation to the material - Large, ball-bearing rotary table with internal table clamping & precision stops at 0/45/60° for fast adjustment for miter cuts - Pneumatic vice equipped with bolted jaws, providing optimum workpiece clamping thanks to the ribbed surface - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual - Wiring diagrams and exploded drawings - Lifting eyes for transport * Machine is supplied without saw blade