Žage Za Hladno nakup rabljenega (84.522)

Stanje: zelo dobro (rabljeno), Brusilni stroj za HM (trdokovinske) žage za prednje in zadnje brušenje VOLLMER model CE21H Redpfxjydd D Hj Abhsn

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups Rodpfew Sy T Hox Abhon - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Leto izdelave: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Bandsaws up to 230 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Rsdpfox Uwzhsx Abhsn Rake angle: 0 - 40°

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2026, Wet grinding machine Mechanical with touch panel Rodpjx Uwzbjfx Abhsn Tooth profiles: All common tooth profiles Blade width: Frame saw blades up to 230 mm Blade thickness: 0.6 – 6.0 mm Tooth pitch: 0 – 60 mm Tooth height: 0 – 25 mm Hook angle: 0 – 40°

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj),

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Model: BAS 100. Rsdpfow Snpijx Abhjn Stroj za varjenje tračnih žag z utripnim varjenjem. Hidravlično vpenjanje. Časovnik za popuščanje. Naprava za pozicioniranje žaginega lista. Leto izdelave: 1997. Samodejni nadzor temperature popuščanja. Varjenje lesenih trakov do 100 mm. Bimetalni trak do 80 mm. Priklop: 3 x 220 V. (možen tudi 3 x 400V na zahtevo) Teža: 500 kg. Dimenzije (Š*G*V): 1400*900*1500 mm. Navodila in embalaža vključena.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: BAS Maksimalna širina varjenja do 50 mm. Varilni stroj za čelno varjenje. Ročno vpenjanje. Širina rezila do 50 mm. Rabljeni stroj v delujočem stanju. Stroj je prebarvan. Varjenje tračnih žag za les do 50 mm. Varjenje tračnih žag za kovino do 34 mm. Redpfx Aew Snu Sjbhjn Dobava iz zaloge. Priklop: 220 V. Teža: ca. 180 kg. Pakiranje vključeno.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Model: BAS 051. Avtomatski stroj za zvarjanje tračnih žag z odgorevanjem. Pnevmatska pritrditev. Rodoxcnzrepfx Abhjn Žarilni pirometer. Vodilo za vstavljanje za pozicioniranje lista. UniOp avtomatska regulacija žarilne temperature. Stroj očiščen in na novo prebarvan. Leto izdelave: 2001. Nazivna napetost: 380 V AC. Največja varilna moč: 8 kVA. Vpenjalna sila: 20 kN. Kovaška sila: 5 kN. Območja varjenja. Tračni žagini listi za les: 6–50 mm. Bimetalni tračni žagini listi: 6–41 mm. Tračni noži: 6–50 mm. Tračni žagini listi iz nerjavnega jekla: 6–30 mm. Teža: 600 kg. Mere (Š x D x V): 1350 x 1000 x 1700 mm. Navodila in embalaža vključeni.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1000 x 1500 x 1800 mm Weight: 570 kg Total power requirement: 3 kW Bandsaw Blade Sharpening Machine WINTER SAWMAX 160-PNK-SB Depending on cutting type and application, the PNK-SB is designed for sharpening various bandsaw blades in different shapes, widths, and thicknesses. The PNK-SB features a compact and robust grinding unit for precise and stable sharpening. - Bandsaw blade width: 50–160 mm - Tooth pitch: Max. 60 mm, Tooth depth: Max. 25 mm - Tooth profiles: PV, NV, KV, SB; Hook angle (-5°) to (+35°) - Blade thickness: Min. 0.4 mm; Feed speed: 12/90 teeth/min (8-stage, variable speed) - Number of motors: 4 - Grinding wheel motor: 1.1 kW, 1400 rpm - Coolant pump motor: 0.75 kW, 2800 rpm - Gearmotor: 0.55 kW, 1400 rpm - Motor for vertical movement of the saw blade: 0.75 kW, 1400 rpm - Grinding wheel diameter: Ø250 mm - Grinding wheel bore: Ø20 mm - Grinding wheel thickness: 10 mm - Grinding wheel speed (variable): 1400–4500 rpm - Operating voltage: 380V, 3-phase, 50–60 Hz - Total power: ~1.50 kW - Dimensions: 100 x 150 x 180 cm - Net/gross weight: 570/595 kg Rjdpfx Ajv A Hgdjbhon PNK-SB at a Glance: - Fully automatic, precise grinding - Corrosion-resistant and hardened coating on all mechanical parts - Coolant: water emulsion - Microprocessor controlled - 24 V control panel - 8-stage, variable feed speed - Max. 60 mm tooth pitch - Fast, precise grinding of NV, PV, KV, and SB tooth profiles - Grinding wheel runs on linear guides - Motor-driven saw blade holder for front tool mounting - Integrated lighting unit - Optional grinding attachments for circular saw blades (HSS) and frame saws - CE-compliant production Optional Accessories: - CBN Woodmizer grinding wheel €375.00 - Diamond wheel for bimetal €520.00 - Bakelite wheel 13 mm €75.00 - Ceramic wheel 16 mm €115.00 - CBN grinding wheel €1,125.00 - Replacement index finger €70.00 - Pin for index finger €20.00 - Dressing wheel attachment €1,170.00 - Diamond dressing wheel €100.00 - Grinding attachment for circular saw blades (HSS) €960.00 - Grinding attachment for frame saws €2,700.00/meter - Pay-off & take-up system for bandsaw manufacturers €5,800.00 - Attachment for double-sided saws €1,560.00 - Pneumatic system for second index finger €1,140.00 - CAM for GD tooth profile (WM) blades €330.00

Stanje: rabljeno, Leto izdelave: 2025, Dimensions (L/W/H): 6400 x 1500 x 1780 mm Total Power Requirement: 19 kW Weight: 1800 kg Optimizing Crosscut Saw WINTER QUICK 100 NC - Minimum workpiece length: 300 mm - Workpiece width min. / max.: 20–220 mm - Workpiece thickness min. / max.: 15–100 mm - Workpiece thickness tolerance: ±3 mm - Maximum tolerance range (per side) of the workpiece: 10 mm/m - Type of wood: softwood or hardwood - Minimum cut-off length: 80 mm - Maximum feed speed: 180 m/min - Cutting speed: 0.15–0.3 s - Total power: 19.0 kW - Saw motor: 7.5 kW - Feed servomotor: 5.5 kW - Saw stroke servomotor: 4.5 kW - Conveyor belt motor: 0.75 kW - Beam lift motor: 0.37 kW - Extraction port diameter: 2 × f120 mm - Table height: 900 mm - Overall dimensions: L=6400 mm, W=1500 mm, H=1780 mm - Weight: 1800 kg Standard Configuration: Redowt Ua Eopfx Abhon - Infeed and marking station with servo drive - Infeed belt and saw stroke, each with individual servo motor drive - 2.5 m outfeed conveyor with fluorescence sensor and ejection - Saw blade with integrated waste blow-off device - User-friendly 10.1-inch TFT touchscreen - Air tank for stable pressure force - High-performance servomotor - Fully enclosed safety cover for quiet and safe operation Efficient production—can replace 4–8 sets of conventional manual crosscut saws.

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Rabljena brusilna linija za krožne žagine liste Model: 1 × PRESTIGE (HSS/CERMET brusilni stroj) in 1 × LOAD-5 (5-postajni avtomatski nalagalnik) Stanje: Rabljeno, v dobrem tehničnem in optičnem stanju Rodpfexx Ix Aex Abhjn Žagini listi: Ø250-630 mm

Stanje: rabljeno, Leto izdelave: 2010, Pregled Ta stroj za etiketiranje s hladnim lepilom je bil izdelan leta 2010 pri italijanskem podjetju Kosme S.r.l. Model Extrafix 504/6 SC2 E3 je zasnovan za etiketiranje steklenic piva iz stekla s tehnologijo hladnega lepljenja. Stroj je bil v proizvodnji do januarja 2025, zdaj je skladiščen in pripravljen za odpremo ter je v dobrem delovnem stanju. Tehnični podatki Zmogljivost: 6.000 steklenic na uro Formati: 0,33 L (steklenice z dolgim vratom) Ovratnik: 26 mm kovinski pokrovček Tip etikete: hladno lepilo (papirnate etikete) Status: skladiščeno, pripravljeno za odpremo Stanje: do januarja 2025 v proizvodnji Rjdpexn T Nfsfx Abhon

Stanje: rabljeno, Leto izdelave: 2011, Overview  This cold glue labelling machine was manufactured in 2014 by the German company HEUFT. It was used for the labelling and inspection of glass bottles, including label presence verification, underfill detection via X-ray, and bottle breakage detection with automatic reject system. The machine is equipped with special devices for bottles with neck foil. It comes with 6 sets of format parts. The Domino laser, suction unit, and glue pumps are not included in the scope of delivery. The machine is available immediately and can be inspected by appointment. Technical data Type: Cold glue labelling machine with 2 labelling stations (8 glue pallets, 6 gripper positions, machine pitch 120 mm) Capacity: up to 36,000 bottles per hour (maximum output without orientation, according to documentation) Container type: Glass, transparent Container diameter: 59–67.5 mm Container height: 226–260 mm Closure material: metal Closure diameter: 28 mm Conveyor height: 1000 mm Electrical connection: 400 V, 50 Hz Max. ambient temperature: 40 °C Device diameter, container carousel: 1150 mm Control functions (Spectrum TX): Label presence check (sensors), underfill check (X-ray), bottle breakage check, reject system Special feature: processing of NRW bottles with neck foil Scope of delivery  HEUFT Tornado W including 2 cold glue stations Spectrum TX control system Rsdpfowz Evyex Abhjn 6 sets of format parts Without Domino laser, suction unit and glue pumps

Stanje: rabljeno, Leto izdelave: 2004, Overview  The labeling machine was built in 2004 by the Italian manufacturer KOSME. The machine is in good condition, professionally dismantled and stored. Features two cold glue stations: one main label, one neck label, and one back label, plus one adhesive station. The labeling machine operates in a counterclockwise direction. Technical Data: Capacity: 6,000 bottles per hour. Labeling stations: 2 cold glue, 1 self-adhesive. Redpfev Df I Njx Abhsn

Stanje: rabljeno, Leto izdelave: 2004, Overview  This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue units and three self-adhesive labelling units, offering flexible labelling configurations for a wide range of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical Data  Capacity: 8,000 bottles per hour (6,500 bottles per hour with photoelectric orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, label height 330 mm, steel glue roller Station 2: Wet glue, label height 230 mm, steel glue roller Units 3-5: Self-adhesive Orientation: Photoelectric bottle orientation via closure Prepared for orientation via bottle lug Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-200, Touch TD integrated Rotation direction: Right to left Scope of delivery  GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control system (Siemens S7-200 with Touch TD) Machine safety enclosure with wing and lifting doors Rjdpfjwh U D Tsx Abhen

Stanje: rabljeno, Leto izdelave: 2004, Overview The machine was manufactured in 2004 by the German company Langguth and has been completely overhauled. The images do not show the actual machine but are closely comparable and representative. Technical Data Labeling height up to 210 mm Completely overhauled as shown in the images, but with a base frame made of steel. Includes 2 bottle formats and 2 label formats. Optional with discharge rotary table. Redpfxjm D Ukis Abhon

Stanje: rabljeno, Leto izdelave: 2004, Overview This cold glue labelling machine was manufactured in 2004 by the German company KHS. The machine remained in operation until January 2025 and is now stored at the company premises. The labeller is equipped with a camera system for precise alignment of neck labels on swing-top bottles. Technical Data Capacity: Up to 26,000 bottles per hour Operating direction: Counter-clockwise Formats supported: - 330 ml longneck glass bottles - 330 ml Steinie glass bottles - 330 ml swing-top glass bottles - 500 ml NRW glass bottles Label positions: - Front (up to 2 labels) - Back (up to 1 label) Rjdpswhwwvsfx Abhen Equipped with Siemens S7 PLC New HMI touch panel in 2019

Stanje: rabljeno, Leto izdelave: 2008, Overview This cold glue labelling machine was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels with cold glue and is available immediately. Technical Data Manufacturer: Gernep Model: Labetta 4/3/10 640 2A Year of manufacture: 2008 Rotation direction: Counterclockwise machine (bottle plates rotate counterclockwise) Rated capacity: 14,000 bottles/hour Adjustable from 3,000 – 15,000 bottles/hour 2 cold glue units Rjdpfx Aowaxyiobhen Label positions: body, neck, back Bottle formats: - 0.5L NRW bottle - 0.33L Vichy bottle - 0.33L Ale bottle

Stanje: novo, Capacity Ø 30 - 160 mm Saw Body: 30 Degree Linear Slide Saw Motor: 15 kW Hydraulic Motor: 3 kW Saw Feed Motor: 1.5 kW Siemens Saw Speed: 30–120 rpm Saw Blade Diameter: Ø480 x 2.25 x 2.7 x 50 mm Control: Siemens Hydraulics: Rexroth Valve Coolant: Atomized Cutting Oil Machine Weight: approx. 5550 kg Installation Space: approx. 3200 x 7600 mm For pricing information, please use the contact form. GERD WOLFF GLS-160 High-Performance Circular Saw (Fully Automated) Discover the new generation of high-performance metal circular saws that combine precision and efficiency in perfect harmony with German quality. Our high-performance metal circular saw machines set industry standards in metalworking, thanks to their innovative technology allowing you precise and effortless machining of any type of steel. From 10 mm up to an impressive 250 mm steel diameter, our machines deliver highly accurate cuts within seconds. The core features of these machines are their automatic functionalities paired with an advanced ball screw spindle and an automatic material feed system. This combination ensures not only the highest level of precision but also remarkable speed. A Siemens motor and a Siemens PLC display guarantee reliable performance and easy operation. Furthermore, our high-performance metal circular saws are equipped with a special system for convenient and rapid saw blade changes. The hydraulic material clamping ensures reliable securing of the workpiece during the cutting process. Additionally, an integrated programmable spray mist system ensures optimal lubrication and cooling of the saw blade, thereby extending the tool’s service life. Thanks to our servo and drive technology, you have full control over your production processes, enabling you to optimize your workflow and achieve the highest quality standards. Rjdpfxoud Iw Ij Abhen Choose our high-performance metal circular sawing machines and experience the future of metal processing—precise, efficient, and reliable. High-performance circular saw, precision saw, industrial circular saw, heavy-duty circular saw, metal saw, precision cutting machine, heavy-duty cutting saw, industrial saw, power circular saw, metal circular saw, precision cutting saw, professional circular saw, automatic saw, bulk cutting machine, industrial metal saw, high-power cutting saw, productivity saw, large circular saw, industrial cutting machine, high-speed circular saw, industrial high-performance saw, industrial saw machine, cutting machine for heavy applications, high-performance cutter, industrial machine saw, high-power circular saw, automatic metal saw, industrial precision saw, large format saw, high-performance industrial circular saw, precision industrial saw, heavy-duty metal saw, etc.

Stanje: novo, Leto izdelave: 2025, Kapaciteta Ø 140 - 250 mm Motor žage 30 kW Hidravlični motor 5,5 kW Motor podajanja žage 3 kW Siemens Redpfx Abot Hytbohon Motor za dovajanje materiala 3 kW Siemens Hitrost žage 30–80 obr./min Premer žaginega lista Ø750 x 3,8 x 3,2 x 80 mm Območje reza min. 1000 mm Območje reza max. 7000 mm Krmiljenje Siemens Hidravlika ventil Rexroth Hladilno sredstvo: prašnato rezalno olje Prostorske zahteve cca 3500 x 8000 mm Hitrost žage 30–80 obr./min Teža stroja cca 9000 kg GERD WOLFF GLS-250 Visoko zmogljiva krožna žaga (popolnoma avtomatizirana) Od 10 mm do 250 mm jekla, natančno in enostavno režejo vsako vrsto jekla v nekaj sekundah. Opremljeni s komponentami iz Nemčije, združujemo nemško in turško strojništvo.

Stanje: novo, Kapaciteta Ø 10 - 75 mm Motor žage 11 kW Hidravlični motor 3 kW Motor podajanja žage 1,5 kW Siemens Motor za podajanje materiala 1,5 kW Siemens Hitrost žage 70-160 o/min Premer žaginega lista Ø285 x 2,0 x 1,7 x 32 mm Območje reza min. 1000 mm Območje reza max. 7000 mm Krmiljenje Siemens Rsdpfx Aotq Du Hjbhsn Hidravlika ventil Rexroth Hladilno sredstvo praškasto rezalno olje Potrebni prostor cca 2950x6800 mm Teža stroja cca 3500 kg GERD WOLFF GLS-75 Visoko zmogljiva krožna žaga (popolnoma avtomatizirana) Od 10 do 75 mm jekla – v nekaj sekundah enostavno in natančno reže kakršnokoli vrsto jekla. Opremljen s komponentami iz Nemčije, združujemo nemško in turško strojništvo.

Stanje: zelo dobro (rabljeno), HSS saw beveling machine PERUZZI model SAUT 550, completely overhauled and newly painted, like new Redohzcctopfx Abhsn

Stanje: novo, Primeren za številna področja uporabe, posebej tudi za fotovoltaično in avtomobilsko industrijo. Rodpfx Aox E U Dnsbhsn Ponujamo vam popolnoma avtomatske krožne žage in celotna žagalna središča serij "Profilma", "KS" in "SW" z največjim premerom žaginega lista do 650 mm. Nakladalni in razkladalni sistemi so prilagojeni vašim potrebam. Učinkovit odsesovalni sistem z ločevalnikom oljne megle dopolnjuje udobje. Povprašajte nas – skupaj bomo našli optimalno rešitev za vašo proizvodnjo!

Stanje: novo, Lames de scie à ruban disponibles en stock / livrables à court terme dans une grande variété de dimensions, compatibles par exemple avec les scies à ruban horizontales des marques MEBA, Behringer Eisele, Jaespa, Kaltenbach, Kasto, etc. Nous vous soumettons volontiers une offre pour les lames de scie à ruban dont vous avez besoin. Voici, par exemple, les modèles les plus courants de la marque MEBA avec les dimensions correspondantes (pas de denture et qualité de lame selon accord ; nous vous conseillons volontiers sur demande!) : Scie à ruban Dimensions de la lame 230 G/230 DG 2710x27x0,9mm 260 DG/260DG HS 3350x27x0,9mm 320 G 3200x27x0,9mm 320 G HSS/320 DG HSS 3200x34x1,1mm 260 GP 3350x27x0,9mm 260 AP 3350x27x0,9mm/3700x27x0,9mm à partir de 3/2006 260 GA 3700x27x0,9mm 335/G/DG/GA/DGA 4400x34x1,1mm 300 A 4900x34x1,1mm 330mat 4900x34x1,1mm 405 DG 5000x34x1,1mm 410/410 A/410 DG/410 DGA 5800x41x1,3mm 510/510 A/510 DG/510 DGA 6100x41x1,3mm Rjdpfx Abeu R Rn Sohon 434mat 6220x41x1,3mm 400 A/500 A 6220x41x1,3mm 600 A 7900x54x1,6mm 800 extreme 9000x67x1,6mm

Stanje: zelo dobro (rabljeno), Pralna naprava za žage in orodja Rotatherm Redpfexw H Tvex Abhsn