Žage Za Hladno nakup rabljenega (84.919)

Stanje: dober (rabljeno), Vice for cold circular saw, saw vice -Vice: from a cold circular saw, manufacturer FCB type OMP 06 -Dimensions: see photos -Measurements: 700/200/H200 mm -Weight: 28 kg Iodpfx Aer A H Sijdkjtd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Hydraulic saw tensioner for frame saws The Sägenmacher GmbH / Thöress Year of manufacture: 2022 Overall length: 710 mm Iodswbu S Rjpfx Adketd Overall width: 215 mm Overall height: 85 mm Including a wide range of spare parts Very good condition – immediately available Location: Austria, near Ried im Innkreis

Leto izdelave: 1991, stanje: rabljeno, Vsebina: 15 hl Periferija: črpalka Itodpfx Aew Tml Ejdked

Leto izdelave: 2023, stanje: novo,

Stanje: rabljeno, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. Itjdewhf Ipepfx Adksd - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: rabljeno, Cutting length: 4,300 mm Cutting height: 2,150 mm Automatic ELCON Precision Panel Saw Type D 215 ----- Cutting height: vertical 2,150 mm, horizontal 2,100 mm Cutting length: 4,300 mm ----- Technical Specifications: Cutting depth: max. 60 mm Saw blade extension behind panel: max. 25 mm Iedpfxsi Hc S De Adketd Saw blade: Diameter 250 mm, bore 30 mm, Z=48 hollow flat teeth Saw blade speed: 5,100 rpm Motor: 4 kW (S 6) Measurement Readout for: horizontal cuts: via scale and strip cutting stop vertical cuts: via scale Extraction ports: 100 & 80 mm Required air pressure: 6 bar Features: -Material support with 1 roller per meter of cutting length, can be engaged and disengaged via foot pedal -1 infeed and outfeed roller -pneumatically retractable slat frame -central support, 1 support element per meter cutting length, can be folded out individually by hand -Scoring system: main saw blade double cut -torsion-resistant, free-standing machine frame -Two folding stops for vertical cuts (above and below the central support) ----- Special price "Partnership Edition" ex works in this configuration: on request! ----- Plus pre-carriage, shipping, installation and commissioning (provided the machine does not need to be dismantled). Valid within Germany only. Unloading and transport to final installation site to be handled by customer. Price: EUR 1,900.00 plus statutory VAT ----- Options at extra cost: Cutting length 5,300 mm instead of 4,300 mm Order no.: ELCO0075/O049 Additional charge: EUR 2,590.00 plus statutory VAT ----- Technical details as per manufacturer – subject to change without notice.

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), LBL Brenta Band Resaw CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Itodpfx Asd Imuzsdkjd 9 blades Head and main frame made of cast iron Free middle blade, overheating protection Clearance = 800 mm Fast, precise positioning with servo motor With additional roller for forward and backward cutting

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, dolžina gredi pod glavo: 200 mm, hitrost vleke: 75 mm/s, premer diska: 14 mm, Cold header, 2-blow. FIDE EF-180 for the production of long screws Isdpoqagpxofx Adkstd Capacity: Diameter 14x200 mm Strokes per minute: 75 Completely overhauled by HBR srl

Stanje: rabljeno, Leto izdelave: 1987, Maximum rolling pressure NA t Workpiece diameter: 38 mm Workpiece length: 500 mm Total power requirement: 24 kW Machine weight: approx. 10 t Space requirement: approx. [dimensions not specified] Max. stroke of the upper/lower tool slides: 760 mm Max. rack length: approx. 610 mm Workpiece length between centers: approx. 500 mm Max. gear/profile width: 92 mm Max. workpiece Ø: 38 mm Tailstock stroke on support (hydraulic): approx. 500 mm Module range: 0.3 to 1.3 module Iedst Hw D Dspfx Adkotd Total drive: approx. 24 kW - 380 V - 50 Hz Total weight: approx. 10,000 kg Accessories / Special features: - KBH workpiece feeder, positioned parallel to the machine, currently set up for loading and unloading shaft-shaped workpieces (approx. 16 mm Ø x 200 mm long) with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, including a workpiece position monitoring unit. - Originally used for rolling external gears (Zz = 25) on so-called planetary carriers (automotive): Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. - Various accessories, separate control cabinet, separate hydraulic unit 900 L, integrated coolant system, control panel with plain-text fault display, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than gear hobbing. Workpieces are clamped between centers and formed using synchronized, counter-moving rack tools. Material is displaced and formed by the increasing profile height in the rack tool. In the tool's calibration zone, profile and surface finish are optimized. No profile overrun is required as with milling or shaping. The machine features an exceptionally robust design. Tool life can reach 25,000 to 100,000 pieces, even with helical gears. Condition: very good – set up in our warehouse and ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further cold rolling machines and other gear manufacturing machines always in stock.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schorch elektromotor 75 kW – 735 obr./min. Za neposreden pogon žage okvirja. Z ojačanimi ležaji. Z jermnico premera 400 mm. Itodpfx Aexvpqbjdked

Stanje: novo, Leto izdelave: 2025, 7.5 kW electric motor Itsdpjid I A Eofx Adkod 400 V capacity, 3-phase Maximum workpiece dimensions: 790 x 178 x 2794 mm Saw band dimensions: 3960 x 34 x 0.9 mm Band speed: 17 m/s Tooth pitch: 22 mm Wheel diameter: 480 mm Dimensions: 4064 x 1778 x 1800 mm Rail dimensions: 4000 x 1030 mm Transport dimensions: 2150 x 610 x 810 mm Weight: 352/380 kg Additional 2-metre extension costs 350 euro (excluding VAT)

Stanje: novo, Leto izdelave: 2025, 27 hp petrol engine (LONCIN, electric start) Displacement: 764 cc Maximum workpiece dimensions: 910 x 4800 mm Saw blade dimensions: 4576 x 40 x 0.9 mm Blade speed: 17 m/min Tooth pitch: 22 mm Wheel diameter: 508 mm Manual feed Overall dimensions: 4064 x 1778 x 1800 mm Extension: 6000 x 1010 mm Transport dimensions: 2080 x 750 x 830 mm Weight: 722/782 kg Itodpfehg Ahnox Adkod Undercarriage option

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Automatic infeed table / through-feed system Outfeed table Itodpst Ir Nqsfx Adkjd 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Leto izdelave: 2022, stanje: novo, I am selling 150 sets of new saw blades suitable for multi-blade saws and gang saws. Itodpfx Aow Am Imodksd Saw blade PILANA 290 x 2.5 x Bore 60 Teeth 30+4 FZ and PILANA 250 x 2.3 x Bore 60 Teeth 30+4 FZ Total price: 2,000 euros. Immediately available.

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Itedpfx Asfg Rlcedkod Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Leto izdelave: 2025, stanje: novo, Izkoristite naše hidravlične module z integriranim zalogovnikom – popolna rešitev za sodobne sistem hladne vode. Centralni zalogovnik omogoča stabilno delovanje sistema, zmanjšanje tlačnih nihanj in izboljšano razpoložljivost vaše naprave. Primer izvedbe: Hidravlični modul s 5000-litrskim zalogovnikom Integrirana dvojna črpalka za redundantno delovanje ali povečano kapaciteto pretoka Hidravlično ločevanje med primarnim in sekundarnim krogom Natančen nadzor tlaka in temperature za optimizacijo skupne učinkovitosti Prostorsko varčna zasnova ohišja za enostavno integracijo v obstoječi proces. Z veseljem vam pripravimo individualno ponudbo z dimenzioniranjem in dobavnim rokom. Itodpfohtfhaex Adkjd

Stanje: novo, HSS circular saw blades for steel processing partly with side holes: 315 x 2.5 x 32 mm, 90 teeth 315 x 2.5 x 32 mm, 98 teeth Ijdpfxsc R Tyqj Adkstd 225 x 1.9 x 32 mm, 90 teeth

Stanje: rabljeno, Leto izdelave: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Max. permitted rated drum speed: 7200 rpm Max. permissible feed product density: 1.0 kg / dm³ Heavy phase (liquid): 1.0 kg/dm³ Solids: 1.1 kg/dm³ Min. / max. feed product temperature: 5 / 100 °C Max. throughput: 30 m³/h Isdpfowayr Tox Adkotd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, premer obdelovanca (maks.): 160 mm, največja hitrost vrtenja: 300 obr/min, dolžina obdelovanca (maks.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for conical rolling or cylindrical finish-rolling of profiles on sliding sleeves, slide wheels, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Internal gearing set-up approx.: 85 mm Workpiece external size: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece pressure ring external set-up: 160 mm Travel and Adjustment Data Maximum rolling carriage travel: 60 mm Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speed infinitely variable: 30 - 300 rpm Rolling pressure infinitely adjustable (at 100 bar): 6.1 t Control: SIEMENS PLC control Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display Isdpfx Aewmb Rksdketd MACHINE DETAILS Approx. machine weight: 4,500 kg Space requirement approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive power: 14 kW Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece control station - Workpiece transport device - Changeover time to other workpiece size: 30 min / Processing time per workpiece approx.: 25 s - Workpiece buffer storage - Separate hydraulic unit - Separate control cabinet - Coolant system Note: Working ranges are approximate values and depend on workpiece and tooling conditions.

Stanje: zelo dobro (rabljeno), Frietsch ŽAGNE STROJI Nakup in prodaja KASTO žagnih strojev Itjdpfjfh Hukex Adked Spoštovane dame in gospodje, kupujemo in prodajamo, obnavljamo, generalno prenavljamo ter lakiramo KASTO žagalne stroje. Več kot 40 let imamo izkušenj z žagalnimi stroji KASTO in smo specializirani za njihovo generalno obnovo. Stroji so obnovljeni s strani strokovnega osebja po tovarniških standardih KASTO. Po vaši želji poiščemo tudi KASTO žagalne stroje za generalno obnovo. Dobra cena in zmogljivost zaradi profesionalne obnove strojev.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 109987 - 2800015, premer obdelovanca (maks.): 38 mm, dolžina obdelovanca (maks.): 500 mm, hod: 1.950 mm, Suitable for chipless cold forming of profiles such as plug-in gears (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls. TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Itedewm Hqvopfx Adked Max. carriage stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. external profile diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gearing (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Total power requirement: 52 kW Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Total width: 5,014 mm Machine width: 4,560 mm Depth without outrigger: 2,541 mm Depth with outrigger: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Horizontal machine design - Fully enclosed guard - Tailstock - Hydraulic system - Lubrication system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 109853 - 280028, premer obdelovanca (maks.): 38 mm, dolžina obdelovanca (maks.): 500 mm, TECHNICAL DETAILS Cold Rolling Machine EX-CELL-O with Felsomat (1999) Design: Horizontal Application Range: Chipless cold forming of profiles such as spline shafts (straight or helical), spiral gears, oil grooves, CV joints, threads, knurling Workpiece Data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outside diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gearing: 0.3 - 1.25 m Rolling bar length: 610 mm Stroke Movements Slide stroke: 760 mm Cycle Times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock return (at approx. 300 mm stroke): 1.5 s Rolling bars return: 3.5 s Loading/Unloading (manual): 5.0 s Cycle time: 14.0 s Gearings/hour at 100% performance: 260 MACHINE DETAILS Total width: 5,014 mm Machine width: 2,360 mm Depth without extension arm: 2,541 mm Depth with extension arm: 4,165 mm Height: 2,100 mm Machine weight: 10 t Electrical Specifications – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW Itedpewmb Trsfx Adksd EQUIPMENT - Complete enclosure - Tailstock - Hydraulic unit - Oil system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 109 956, premer obdelovanca (maks.): 38 mm, dolžina obdelovanca (maks.): 500 mm, TECHNICAL DETAILS Workpiece Rack length: max. 610 mm Workpiece diameter: 38 mm Module range: 0.3 – 1.3 Max. slide stroke: 1130 mm Max. rolling arbor length: 915 mm Max. profile outside diameter (standard): 50 mm Max. profile width (standard): 125 mm Gearing (rollable): 0.3-1.25 Machine cycle times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling arbors forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling arbors return: 4.8 s Loading/unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total weight (without automation): 12,200 kg Total width: 5,014 mm Machine width: 3,104 mm Depth without cantilever: 2,564 mm Ijdpewx H R Tsfx Adketd Depth with cantilever: 4,166 mm Hydraulic System Hydraulic tank: 1,000 l Hydraulic operating pressure: 80 bar Electrical Equipment Operating voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank capacity: 260 l Pump pressure: 3 bar Pump flow rate: 24 l/min Cooling water supply for hydraulic tank (flow): 10 l/min Cooling water supply for hydraulic tank (temp.): 20 °C EQUIPMENT Full enclosure available Tailstock available Hydraulic system available Oil system available

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Chiller – Water Chiller Unit Emerson Network Power Brand: Emerson Network Power Cooling capacity: 1300 kW Itodpswplwgjfx Adked Dimensions: 13.5 × 2.50 × 2.40 m The unit features high cooling performance, making it suitable for demanding environments where reliable heat dissipation is essential.

Stanje: pripravljen za uporabo (rabljen), Brusilnik, ostrilo za tračne žage Bratstvo Lignum. Stroj je kompleten in tehnično brezhiben. Lahko je dodatno opremljen z valji za držanje tračnega lista. Itodpfx Adsxx Uxieksd