Žage Za Hladno nakup rabljenega (84.883)

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Itsdpfxoh Imvhe Adkod Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 With clamping grippers: 7 Rotary device (for panels): up to 90° Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 Ijdpfxoukhd Aj Adkotd 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: pripravljen za uporabo (rabljen), Stroj za upogibanje zob krožnih žag MEINERT model P.H. Iedpfx Asxrcz Eedkotd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.100 mm, skupna širina: 3.100 mm, hod: 950 mm, premer stebra: 130 mm, minimalna višina orodja: 900 mm, vpenjalna sila: 35.000 kN, pritisk: 400 letvica, Instalirana in zagnana samo v suhem načinu (preskusni zagon, brez proizvodnje). - Dvoplatenska stiskalnica - Največja zapiralna sila: 35.000 kN - Vbrizgalna sila: pribl. 390–420 kN (odvisno od velikosti bata) - Premer bata: Ø130 mm - Hod bata: 950 mm - Teža brizga (Al): 6,5–8,5 kg, odvisno od bata - Projekcijska površina pri 400 bar: 8.750–9.000 cm² (izračunano na osnovi zapiralne sile 35.000 kN) - Velikost plošč (V × Š): 3100 × 3100 mm - Razdalja med vodilnimi stebri (V × Š): 1950 × 1950 mm - Višina orodja (min / maks): 900 / 1350 mm - Hod odpiranja orodja: 1200 mm Støtek sistem taljenja z: - Støtek SMG 3.0_7.0 dvokomornim plinskim talilnim jaškovnim pečem z dvižnim dvigalom za polnjenje ingotov, talilna zmogljivost peči pribl. 1,5 t/h - Støtek DTI 6020 zadrževalni peč s Fuco-Heg MBS 2000 postajo za obdelavo/tretman taljene kovine - Støtek AMET 1700 dozirni peč Die-casting stroj LK Impress Plus DCC 3500 s: - Siemens PLC S7-1500 krmiljenjem - ABB IRB 6650S robot za nanos ločilnega sredstva za orodje - Wollin OSA 15-2-C sistem za dovod in brizganje ločilnega sredstva - AED 181-080 sistem za redčenje maziv za litje - Fondarex Highvac Premium 2C 200 vakuumski sistem za tlačno litje z zračnim rezervoarjem in vakuumskimi črpalkami - 5× IECI PFN 330 2-Z enot za temperaturno kontrolo olja - 5× IECI PF-ZH 1802-Z enot za temperaturno kontrolo vode - KMA Ultravent UV 20000EE sistem za odsesavanje izpušnih plinov in filtracijo - ABB IRB 7600 robot za razkladanje iz stroja za tlačno litje, nalaganje/razkladanje iz obrezovalne stiskalnice in nalaganje v hladilno postajo Itedpeygxr Rofx Adkod - LK WB-100 obrezovalna stiskalnica 1.000 kN s transportnim trakom za obrezke - ABB robot za razkladanje iz hladilne postaje, lasersko označevanje in izhodni transport - Keyence MD-X 1500C 3-osni sistem za lasersko označevanje - Izhodni transportni trak s hladilnim tunelom Na voljo je tudi količina rezervnih delov.

Stanje: rabljeno, Leto izdelave: 1995, skupna dolžina: 4.450 mm, skupna širina: 1.530 mm, skupna višina: 2.550 mm, Poids : 740 kg - Année de fabrication : 1995 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE disponible : Non - Numéro de série : 25607 - Hauteur de coupe maximale verticale [mm] : 1920 - Hauteur de coupe maximale horizontale [mm] : 1820 - Largeur de coupe maximale [mm] : 3300 - Profondeur de coupe maximale [mm] : 80 - Diamètre de lame de scie minimum [mm] : 300 - Diamètre de lame de scie maximum [mm] : 300 Itodpfswiwlvox Adkod - Diamètre d’alésage lame de scie [mm] : 30 - Coupe horizontale : Oui - Coupe verticale : Oui - Tension [V] : 400 - Puissance [kW] : 4,8 - Dimensions de transport : 4451mm x 1535mm x 2550mm (L x l x H) - Poids de transport [kg] : 740kg - Nombre de colis de transport : 1 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/Régime de taxation différenciée : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Yorick Diebels

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h Ijdpfjv A Htkox Adkstd - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm Isdpfx Adov A Htdjketd - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl Itedpfx Adev A Hr Tjked - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min Iedpfevz Hz Eex Adkotd - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 3000x1070x1200 mm Gewicht 1150 kg Gesamtleistungsbedarf 10 kW Optimierungskappsäge OPTIMAX 100 - Sägemotor 7,5 kW - Drehzahl 3200 U/min. - Vorschubmotor 2,0 kW - Vorschubgeschwindigkeit stufenlos regelbar bis max. 80 m/min. - Schnittgeschwindigkeit bis zu 80 Takte/min. - Sägeblatt Ø 455 mm - Sägeblattbohrung 30 mm Isdpjvz Hzxefx Adketd - Schnitthöhe 100 mm (gemäß Schnittdiagramm) - hohe Schnittgenauigkeit +- 1 mm - min. Werkstücklänge 300 mm - min. Abstand zwischen der Markierung 20 mm - min. Werkstückgröße 300 x 30 x 10 mm - PLC Steuerung mit Touch-Screen für einfache Bedienung + Kappschnitt Fix-Längen-Modus + Sequentieller Kapp-Modus (10 verschiedene Maße speicherbar) + Kappschnitt von markierten Kreidestrichen + Kappschnitt Fix-Längen und von markierten Kreidestrichen - Einlauf-Rollentisch rechts 1200 mm - Auslauftisch links 1000 mm - Druckluftanschluss 8 bar - CE Konformität - Abmessungen L=3000, B=1070, H=1200 mm - Gewicht 1150 kg

Stanje: rabljeno, Massive EWD EW1000 carriage for band sawmill Hydraulic block band saw carriage 5 clamping heads Double V-turner Slab turner Hydraulics Control cabinets Maximum distance to saw blade: 1000 mm Clamping jaw opening: 900 mm Distance between clamping heads: 1000 mm - 1450 mm - 2050 mm - 3000 mm Distance between outer clamping heads: 7500 mm Track gauge: 1300 mm Iodpoqwnziefx Adkstd Overall length: 9000 mm Overall width: 2450 mm Overall height: 1750 mm Available immediately Already dismantled and ready for loading Without saw, without saw frame

Stanje: dober (rabljeno), CV saw grinding machine VOLLMER model CNE Itodpfxovgdc Ds Adkjd

Stanje: zelo dobro (rabljeno), Beveling machine for HSS saws Pedrielli model PGS Itodpfx Adoul Tylsked

Stanje: zelo dobro (rabljeno), CNC Saw Blade Grinding Machine VOLLMER Model CNS Itsdjtwm Uuspfx Adksd

Stanje: zelo dobro (rabljeno), HSS saw beveling machine EYAN Ijdpjhzcd Ujfx Adkjtd

Stanje: zelo dobro (rabljeno), Double-flank grinding machine for carbide-tipped saw blades VOLLMER model Fini-Duo Ijdjv Ef Tbopfx Adkotd

Stanje: dober (rabljeno), CV saw grinding machine Albert Göcker Itedpfxequtd Ro Adkod

Stanje: zelo dobro (rabljeno), HSS saw grinding machine Businaro model Rekord Control Itjdpewyc Hgjfx Adkjd

Stanje: zelo dobro (rabljeno), Band saw welding machine Viscat model FW400 Ijdpfx Adswup U Tokotd

Stanje: zelo dobro (rabljeno), HSS saw grinding machine BUSINARO model Rekord 500 CNC Iedpfx Aev Ah Rkodkstd

Stanje: generalkompletno obnovljen (rabljeno), REKORD 400 MODIFIED WITH TANK AND COOLING SYSTEM SHARPENING MACHINE FOR TUNGSTEN CARBIDE AND HSS CIRCULAR SAWS (FULLY OIL-BASED OPERATION) FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP feed motor for grinding carriage Cooling system indicator (Oil bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifier lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual bevel angle adjustment using scale rod Itodpoh A N R Sefx Adked No. 1 copy wheel No. 1 diamond wheel, diameter 150 x 4 - 60° No. 1 bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm

Stanje: rabljeno, Veneer saw, veneer sawing machine, veneer splicing saw, fine cutting machine, fine cut circular saw, veneer saw drive motor Itodpfx Ash Elztjdkod -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW, 2820 rpm -Dimensions: 265/270/H255 mm -Weight: 24 kg

Stanje: zelo dobro (rabljeno), Metal band saw blade, band saw blade, metal saw band Itedswbr Ddjpfx Adksd - Manufacturer: Holex, unused saw band - Type: 173605 5/8 - Length: 2710 mm - Quantity: 7 blades available - Price: per piece - Transport dimensions: Ø 300 x 40 mm - Weight: 0.5 kg/piece

Stanje: zelo dobro (rabljeno), Metal band saw blade, band saw blade, metal saw band Iodpfxjvu S Tmo Adkjtd - Manufacturer: Wikus, bi-metal saw band M42 packaging unit with 10 pieces, unused, in original packaging - Type: Biflex-Cobalt M42 3660 x 25 x 0.90 mm - Quantity: 2 cartons available - Price/unit: per carton - Transport dimensions: 790/600/H35 mm - Weight: 8.2 kg/piece

Stanje: rabljeno, Scoring Circular Saw Blade, Scoring Saw Blades, Carbide Scorer -Manufacturer: Schäffer, 2-piece adjustable carbide scoring saw blades -Type: 120 x 2.8-3.6 x 22 Z=2x12 -Quantity: 9x scoring blades available -Price: per piece -Box dimensions: 225/220/H10 mm Ijdpfx Adjuvaaajketd -Weight: 0.3 kg each