Hladna krožna žaga

Eisele VMS-III-S-PV

Stanje: rabljeno, Leto izdelave: 1985, Saw blade dimensions Ø 320-350 x 3.0 mm Cutting range 120 mm Cutting range at 90 degrees: square 90 x 90 mm Cutting range at 90 degrees: flat 200 x 90 mm Cutting range at 45 degrees: flat 140 x 90 mm Working height 925 mm Saw blade speeds 17 / 34 rpm Compressed air 6.0 - 8.0 bar Motor speed 1400 / 2800 rpm Total power requirement 2.0 / 2.6 kW Weight 470 kg Dimensions L-W-H 850 x 900 x 1800 mm Machine from a vocational school (NL) Well-maintained condition (!!) Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-release clamping device - Infinitely adjustable saw blade feed - Convenient mitre adjustment with fixed stops - Convenient lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade replacement - High productivity with minimal space requirement (less than 1 m²) Hfsdpoxacbnjfx Af Tjb - Coolant system * Machine link: ?machineno=1008-9164094

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) Hsdpfx Aofgyicsf Tofb * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: Hedpew Dvivsfx Af Tefb • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Hedpfx Asu R S Hpsf Tofb Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -

Stanje: dober (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3400 rpm - Cutting capacity at 90° round: 120 mm - or flat: 105 x 105 mm - or: 180 x 70 mm - at 45° round: 110 mm - flat: 135 x 60 mm - Miter adjustment left and right: 45° Hfjdpewq N Swefx Af Tsb - Saw head tilt adjustment for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2000 mm - Feed roller conveyor: 3000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1730 x D 1200 mm - Weight approx.: 180 kg

Stanje: rabljeno, TECHNICAL DATA - Spindle speed: 400 - 4,500 [rpm] - Drilling capacity in steel / cast iron: 10 / 13 [mm] - Drilling depth: 60 [mm] - Spindle to column distance: 185 [mm] Hjdpfx Afouhabtj Tsfb - Usable table area: 220 x 300 [mm] - Motor power: 0.5 [kW] - Power supply: 220 [V] - Speed selection via display of drill diameter and material - Electronic spindle speed control - Infinitely variable spindle speed adjustment from 400 to 4500 rpm - Constant speed under load - Adjustable drill head height through pneumatic balancing device - Fine depth adjustment through graduated vernier scale - Electronic motor protection - Fully machined base plate (220 x 300 mm)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system Hjdou Dm E Hepfx Af Tefb About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), A used, very well-maintained cold circular saw from EISELE equipped with a 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Hjdpfx Afekfp D Tj Tefb Speed: 17/34 rpm Cutting capacity: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865 x 1332 x 2175mm Weight: 460kg For further technical data, please refer to the PDF document. Technical data and dimensions: Subject to change and errors.

Stanje: rabljeno, Leto izdelave: 1979, Premer reza: 440 mm Teža stroja: cca. 780 kg +++++ Upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videoposnetka nista mogoča. Naš oglas vsebuje najrelevantnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. Hfjdpfx Asf Dwa Ujf Teb +++++

Stanje: novo, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps Hfsdpfsu Si Ndox Af Teb - Mist lubrication system - Air blow gun - Protective cover - Documentation - 400V