Tiger-Vrh nakup rabljenega (757)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Shrink-fit device with integrated cooling Godpev Iyahefx Ah Dekc Power: 3500 W Tool diameter: 3–32 mm

Stanje: rabljeno, Leto izdelave: 2016, Namen uporabe: gradbeništvo Serijska številka: 21A 1xxxx Za dodatne informacije se obrnite na ATS Norway. Prosimo, navedite referenčno številko pri povpraševanju: 21098 Specifikacije: Letnik izdelave: 2016 Teža: 1820 kg Pretok olja: 150 l/min Maks. tlak: 180 bar Originalno dleto od novega Na voljo za takojšnjo dostavo Gksdow N Dg Eepfx Ah Dsc Opis: Naprodaj je hidravlično kladivo Tiger KH-1500SLL, letnik 2016. Po navedbah lastnika kladivo deluje brezhibno, dleto je še v dobrem stanju. Takoj na voljo. Lastna teža: 1820 Model: KH-1500SLL

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Window press - capacity max/min.: 3000*2000/150*360 mm Gjdpoxd Axnjfx Ah Dskc

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A Tiger cassette traverse is available. Mounting width: 2090 mm, load capacity: 2500 kg, machine dimensions (X/Y/Z): approx. 800 mm / 700 mm / 650 mm, weight: approx. 250 kg. Documentation is available. An on-site inspection is possible. Gjdjvxkaaepfx Ah Dokc

Stanje: pripravljen za uporabo (rabljen), Continuous press Tiger 3000x1400 mm Godpfx Ahei Hlf Ee Dokc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic press for veneering Tiger TM/8-E Shelf length: 3300 mm Shelf width: 1300 mm Maximum loading height: 400 mm Press with 8 hydraulic cylinders Cylinder diameter: 70 mm Shelves heated by water Gsdpfxsvgmmre Ah Djkc Machine weight: 4600 kg Machine dimensions: 403 x 153 x 208 cm (H)

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Gkodjrqwbiopfx Ah Doc Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Leto izdelave: 2020, obratovalne ure: 1.000 h, Stanje: rabljeno, Contact ATS Norway for more information. Gsdpfewvzkcjx Ah Dokc Please provide the reference number when inquiring: 20782 Technical Data: - Year of manufacture: 2020 - Operating hours: approx. 1,000 - Voltage: 400 V - Frequency: 50 Hz - Automatic feed screw - Supplied with overhauled rotor - Additional discharge screw included - Available immediately Description: Tiger Depack HS10 Bio Press, year 2020. According to the owner, the machine has been operated for a maximum of 1,000 hours. The rotor has recently undergone a complete overhaul. An additional discharge screw is included in the scope of delivery. The machine is fully functional and ready for immediate use. Operating hours: 1,000 Own weight: 4,700 kg Model: Depack HS10

Stanje: rabljeno, prevoženi kilometri: 1.600 km, vrsta goriva: plin, vrsta prenosa: samodejen, konfiguracija osi: 4x2, skupna masa: 5.000 kg, lastna masa: 3.175 kg, največja dovoljena obremenitev: 1.825 kg, prva registracija: 07/2010, barva: bela, voznikova kabina: dnevna kabina, vzmetenje: jeklo, velikost sprednje pnevmatike: 6.50 -10, velikost zadnje pnevmatike: 225/75 R 16,5, Oprema: kabina, spojka prikolice, Vehicle location: Bovenden, registered vehicle, rear window, automatic transmission, leaf suspension Body: tractor unit, 1,600 operating hours. Tractor unit equipped with a Vortec GM gas engine, kilometres correspond to operating hours. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Gedpfx Ahoi Rpm Ne Dskc

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.900 mm, skupna širina: 2.900 mm, skupna dolžina: 8.000 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 13.000 kg, Type: TMML6-centrum Maximale afstand van kolom tot spilcentrum: 1210 mm (kiel-diepte) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of vervangen door een T-groef vloerplaat voor het bewerken van hogere werkstukken Langsverplaatsing X-as: 3023 mm Dwarsverplaatsing Y-as: 800 mm Vertikale slag Z-as (hoogte): 1528 mm Klemoppervlakte tafel: 4200 x 1000 mm Maximale werkstukhoogte: 2000 mm Spilvermogen: 20 kW Opname in freeshoofdspil (ISO): ISO 50 Gedpfxov St Efe Ah Dokc Toerentalbereik: 50 - 1980 omw/min

Stanje: rabljeno, prevoženi kilometri: 3.439 km, vrsta goriva: plin, vrsta prenosa: samodejen, konfiguracija osi: 4x2, skupna masa: 5.000 kg, lastna masa: 3.175 kg, največja dovoljena obremenitev: 1.825 kg, prva registracija: 07/2010, barva: bela, voznikova kabina: dnevna kabina, vzmetenje: jeklo, velikost sprednje pnevmatike: 6.50 -10, velikost zadnje pnevmatike: 225/75 R 16,5, Oprema: kabina, spojka prikolice, Vehicle location: Bovenden, license plate: house, rear window, automatic transmission, leaf suspension Body: tractor unit, 3,439 hours Tractor unit with Vortec GM gas engine, km = hours Gsdoi Rpqajpfx Ah Djkc ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Stanje: dober (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Tiger 125 Premium, DOM: 04/2023, installed 02/2024, processed cca 100000 m2 thermal plates. Fully functional and ready for transport. Off-white colored processor for thermal/conventional applications * Touch screen control panel (GNUCII) fully featured * Developer configured for thermal applications (2 x brush) * Developer fill pump * Developer conductivity monitor * Drip Tray Developer filter (50 micron woven 10”) * Recirculating (water save) water rinse w. 1 x brush / Gum / Dry * Container level sensor probes (alert on full/empty), 3 sensors Integrated cooling solution Integrated solution to configure for either tap water or water savings Optional interfaces for most CtP’s G&J Remote Enabling and WebConnect - service tools Single phase power connection (world-wide) incl. power cord Day-to-day delivery on ECO-friendly open pallet and in plastic wrapping The processor is world-wide electrical configurable, and complies with CE/UL requirements Godpfxjxg Hyns Ah Dskc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, lightly used Operating hours: 2128 h Cutting time: 1738 h Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Gkodpexnpggofx Ah Doc Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 x saw blades

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) Gkodsxdr Rtopfx Ah Dsc - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with vertically guided head sliding on linear guides with ball recirculating rails in the front. - Double gearbox for high transmission power - 4 speeds: 15 / 30 / 45 / 90 rpm - Vice opening: 190 mm - Stroke movement of the saw head programmable directly from the control panel to adjust for cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material - Vice with counterhold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical cuts - Material support arm, also suitable for connection to roller conveyor / loading side Gkedofg Rlbspfx Ah Dec - Turntable with additional central axis

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Used, in excellent condition, low operating hours Manufacturer: Scheer Model: FM5 - 3100 Year of manufacture: 1984 Machine no.: 41134 Motor power: 1.8 kW Saw feed / handwheel Cutting length: 3,100 mm Saw blade diameter: 180 mm Gksdpfxjvld I Ds Ah Doc Pneumatic clamping Rear support table Parallel fence Undercarriage Required space approx. 4,200 mm x 1,200 mm x 1,200 mm Location: 54634 Bitburg, loaded free of charge, unpacked Transfer in as-seen condition, as inspected, without warranty or guarantee

Stanje: rabljeno, Leto izdelave: 2006, delovna širina: 6.000 mm, Lastna teža: 7.800 kg Gkodpfx Ajxmhn Heh Doc

Stanje: rabljeno, Leto izdelave: 2004, Cutting diameter: 120 mm Gkodpjxabrxsfx Ah Djc Saw blade diameter: 370 mm Vice width: 190 mm Cutting capacity at 90 degrees, flat: 180 x 95 mm Cutting capacity at 45 degrees, round: 110 mm Cutting capacity at 45 degrees, flat: 125 x 95 mm Cutting capacity at 60 degrees, round: 90.0 mm Cutting capacity at 60 degrees, flat: 90 x 95 mm Saw blade dimensions: 370 x 32 x 2.5 mm Cutting speed: 15 - 150 m/min Motor power: 3.0 kW Weight: 640 kg Dimensions (L x W x H): 900 x 1500 x 1910 mm Original price approx. €16,000 - Machine in checked/inspected condition - machine video available - ?v=gxj5GWtTcDE Equipment: - Semi-automatic vertical metal circular saw - Mitre adjustment: 60° left / 45° right - Swiveling operator panel, front left - Saw head runs on linear double guideways - Pneumatic vice clamping - Stepless pneumatic saw blade feed - Infinitely variable saw blade speed adjustment - 2x spare saw blades - Machine base with coolant system - Operating manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019) Gkjdpfx Ajxnpf Aoh Djc Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw Year of manufacture: 2019 Condition: used, very good, tested and cleaned Operating hours: 1750h Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable cutting speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. Gkedefg Rlcopfx Ah Doc The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Gkjdpjfgpdlofx Ah Dsc Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Gjdpofg Rldofx Ah Dekc Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Gksdpfx Ahjhpktyo Doc Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: rabljeno, Leto izdelave: 2004, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 115 mm Cutting capacity at 90 degrees, square: 95 mm Cutting capacity at 90 degrees, rectangular: 180 x 95 mm Working height: 940 mm Saw blade speeds: 15-30-45-90 rpm Total power requirement: 3.15 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.9 x 1.1 x 2.1 m Electropneumatic, linear-guided automatic saw - Infeed roller conveyor 1500 mm - Micro-spray device Gkodpfjv Rgxpox Ah Dsc - Good condition

Leto izdelave: 1989, Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Gksdpfxji Df D Aj Ah Doc Total power requirement: 1.8 / 2.6 kW Machine weight: approx. 0.41 t Space requirement: approx. 0.8 x 1.0 x 1.85 m Semi-automatic cold circular saw