Tračna žaga za kovino

MEP Shark 200

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: Gedpfx Ahjhpktvsmobn - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. Gjdpfjxw N S Iox Ahmsbn We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Gsdpfsvprv Rjx Ahmjbn Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: rabljeno, Leto izdelave: 2003, x-travel: 760 mm y-travel: 290 mm z-travel: 370 mm Speed: 60 - 4200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Space requirement approx.: 2.05 x 1.63 x 2.07 m The MF1 universal milling machine series impresses with its design and has become indispensable in many repair shops as well as training and production departments. The X-axis is equipped with a continuously variable feed unit, and the swiveling vertical milling head features a wide, stepless speed range for machining steel and non-ferrous metals. Standard equipment includes automatic quill feed, pneumatic tool clamping, and a digital position display. ·Swivel and tilting milling head with quill feed ·Pneumatic tool clamping device ·Continuously variable spindle speed ·Rapid feed in X-axis Gbodpfx Ahjt U Rm Uomjn ·Comprehensive standard accessories

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining Gsdpofu Ivzsfx Ahmobn • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 195311, Offer 24601 Technical Data: - Welding current: max. 450 A at 60% duty cycle - 320 A at 100% duty cycle - Welding current adjustable in 3 coarse and 12 fine steps - 50 to 450 A - Separate wire feeder unit with 1 m interconnecting cable - 4-roller wire feed, infinitely variable - 2-stroke + 4-stroke operation selectable - Digital volt and amp display - Spot welding - Interval welding - Water-cooled torch assembly, 4 m - Ground cable - Pressure regulator - Connection: 400 V / 50 Hz / 63 A - Dimensions (approx.): W 750 x D 1100 x H 1600 mm - Weight (approx.): 180 kg Gbodpfx Ahsvt Trzsmjn

Stanje: novo, Digital technology: the NEOPULSE 400 CW is a three-phase pulsed MIG/MAG power source designed for heavy industry applications. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding welding tasks. Its intuitive and functional digital interface allows for easy adjustment of all welding parameters. MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulose electrodes (up to Ø 6 mm). Gsdpfx Ahomxkggomobn TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch - Emergency stop - Documentation - 400V Gjdpfx Aegg N Twehmjbn

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice. Gbedpfjg Trvrsx Ahmen

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit Gbodpfx Aet Hw H Eshmjn • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!