Krožne žage za lahke kovine / aluminij - polavtomatske nakup rabljenega (68)

Stanje: novo, Saw blade diameter: 550 mm Speed: 3580 rpm Saw blade bore: 32 mm Control: NC Total power requirement: 3 kW Machine weight approx.: 250 kg Space requirements approx.: 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured by a renowned producer in Turkey exclusively for our sales brand "GERD WOLLF Maschinenfabrik." Lrodpfx Ajymf Tbjg Tjr CUTTING CAPACITY: Cutting range at 90° round: 155 mm Cutting range at 90° square: 155 x 155 mm Cutting range at 90° rectangular: 260 x 200 mm Cutting range at 45° round: 130 mm Cutting range at 45° square: 130 x 130 mm Cutting range at 45° rectangular: 180 x 200 mm Standard equipment: - Indexing points for 15° – 22.5° – 30° – 45° – 67.5° - Locking lever for securing at intermediate angles - Adjustable cutting speed for various profile types - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easy-to-change saw blade - 2 x pneumatic vertical cylinders with clamps - 1 x air blow gun Optional equipment: - Hydrocheck – Hydraulic feed rate adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Stanje: novo, Saw blade diameter: 400 mm Speed: 3000 rpm Saw blade bore: 32 mm Saw blade width: 4 mm Control: NC Total power requirement: 1.5–2 kW Machine weight: approx. 162 kg Space requirement: approx. 740 x 780 x 1350 mm Lsdpfx Agey S Dwwe Tjrr The Gerd Wolff AC 400 is an automatic aluminium cutting machine, manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Standard equipment - Fixing points for 15° – 22.5° – 30° – 45° – 67.5° - Locking handle for securing intermediate angles - Adjustable cutting speed for various profile types - Saw guard with safety switch - Saw with belt drive - Two-hand safety operation - Easy saw blade exchange - 2x pneumatic vertical cylinders with clamps - 1x compressed air gun Optional equipment - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyors with scales

Stanje: novo, premer žaginega lista: 400 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna dolžina: 720 mm, skupna širina: 760 mm, skupna višina: 1.330 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 100 mm, vrtljajska hitrost (min.): 3.000 obr/min, največja hitrost vrtenja: 3.000 obr/min, Gerd Wolff AC 400 je avtomatski stroj za rezanje aluminija, ki ga za našo prodajno znamko »GERD WOLLF Maschinenfabrik« izdeluje priznani proizvajalec iz Turčije. Standardna oprema Vpenjalne točke za 15° - 22,5° - 30° - 45° - 67,5° Zatezni ročaj za fiksiranje pri vmesnih kotih - Nastavljiva hitrost rezanja za različne tipe profilov - Pokrov žage z varnostnim stikalom - Žaga s pogonom na jermen - Dvoročna varnostna upravljalna enota - Enostavna menjava žaginega lista - 2 x pnevmatski vertikalni cilindri s sponami - 1 x pištola za stisnjen zrak Opcijska oprema Lrodpfsxb Ur Uox Ag Tjr - Hydrocheck – hidravlično prilagajanje hitrosti za aluminijaste profile - Hladilni sistem za rezanje aluminija - Pomožni transporter z merilnimi letvami

Stanje: dober (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 87376, Ponudba 23330 Tehnični podatki: Lsdpfxsxx R Tie Ag Torr - Polavtomatski žagalni stroj s hidropnevmatskim - Pomik žaginega lista – vpenjalna čeljust - Premer žaginega lista: 350 mm - 2 hitrosti vretena žaginega lista: približno 40 + 80 1/min - Obseg reza pri 90°: okroglo 110 mm, ploščato 120 x 80 mm - Pri 45°: okroglo 80 mm, ploščato 80 x 80 mm - Kot rezanja nastavljiv: levo do 45°, desno do 45° - Pomik žaginega lista brezstopenjsko nastavljiv - Pnevmatski materialni vpenjalec - Električni nožni pedal - Priključek na pnevmatiko: 6 bar - Pogon: 400 V / 1,4 / 1,8 kW - Naprava za hlajenje - Prostorske zahteve: pribl. Š 1000 x V 1500 x G 1200 mm - Teža: pribl. 300 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, številka stroja/vozila: 89336, Ponudba 25433 Tehnični podatki: - Premer žaginega lista: 350 mm - 2 hitrosti vretena žaginega lista: cca. 40 + 80 1/min - Območje reza pri 90°: okroglo 110 mm; ploščato 120 x 80 mm - Območje reza pri 45°: okroglo 80 mm; ploščato 80 x 80 mm - Nastavitev kota: levo do 45°; desno do 45° - Ročni pomik žaginega lista - Vpenjalna naprava za material Ledpfxoxx Sgkj Ag Terr - Pogon: 400 V / 1,8 / 2,4 kW - Naprava za hlajenje - Potreben prostor (pribl.): Š 1000 x V 1500 x G 1200 mm - Teža: pribl. 300 kg

Stanje: dober (rabljeno), Natančno delo zaradi žaginega reza od spodaj. Velik obseg nagiba: do 45° levo in do 0° desno. Poseben nagibni mehanizem z integriranim vrtljivim mizom omogoča delo od spredaj pri vseh kotnih nastavitvah. Nazaj pomični prislon za obdelovanec omogoča optimalno izkoriščanje žagine zmogljivosti pri širokih in ploskih profilih. Ročni podaj žage. Serijsko opremljena z žaginim listom in stojalom. Pnevmatska naprava za vpenjanje materiala (vertikalno). Dozirno-razpršilna naprava. Enota za vzdrževanje. Lsdpfxozdi Nme Ag Tsrr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Saw blade diameter: 360 / 400 / 425 mm Cutting diameter: 10 - 140 mm Cutting speed: 8 - 150 m/min Coolant consumption: max. 40 l/min Lodpfx Agjvzt Eqo Tsrr Material support height: 950 mm Clear passage between columns: 680 mm Control system: Siemens Simatic Total power requirement: 28 kW Machine weight: approx. 4.2 t Space requirement: approx. 2.8 x 1.8 x 2.2 m Suitable for: construction steels, stainless steels, tool steels

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 350 mm, skupna dolžina: 1.000 mm, skupna širina: 1.150 mm, skupna višina: 1.550 mm, Obseg rezanja okroglega jekla pri 90°: 125 mm, skupna masa: 620 kg, hitrost žaginega lista: 2.800 obr/min, dolžinski omejevalnik: 2.000 mm, ALU circular saw semi-automatic, saw blade Ø 350 mm, cutting capacity Ø approx. 125 mm, motor 3.7 / 4.5 kW, 2-speed 1420/2880 rpm, vertical clamp, stops at 30°, 45°, 60° and 90° on both sides, saw blade; dimensions 100x115x155 cm, approx. 600 kg Lsdpfstqfvysx Ag Torr

Stanje: dober (rabljeno), Premer žaginega lista: 400 mm Premer reza: 130 mm Območje reza pri 90 stopinjah: ploščato 260 x 60 mm Območje reza pri 90 stopinjah: kvadrat 105 mm Območje reza pri 45 stopinjah: ploščato 200 x 45 mm Območje reza pri 45 stopinjah: kvadrat 90 mm Območje vrtljajev, 2 stopnji: 1400 / 2800 obr./min Moč pogona, preklopni poli: 2 / 4 kW Mere stroja (D x Š x V): cca 1100 x 1100 x 1700 mm Teža: cca 850 kg Lredpsx Rvb Ssfx Ag Tsr Siegfried Volz Orodni stroji Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Nemčija

Leto izdelave: 2007, stanje: rabljeno, Table saw, aluminum profile saw - 2x Saw: Wegoma TS 250 Ljdpfx Aged Sm U Re Torr - Fixed cutting distance: approx. 450 mm - Saws: Can be operated individually or simultaneously - Includes: Foot switch - Saw blade: Ø 250 mm - Voltage: 220/380 V - Saw motor: 0.75 kW - Dimensions: 850/790/H1660 mm - Weight: 234 kg

Leto izdelave: 1983, stanje: rabljeno, Aluminium cutoff saw, under-table saw, aluminium circular saw, semi-automatic aluminium circular saw, mitre saw, glazing bead saw Lrjdpod Ixn Rsfx Ag Tor - Saw blade diameter: 355 mm - Speeds: 1420/2880 rpm - Drive power: 3.7/4.5 kW - Equipped with: coolant system - Dimensions: 990/1140/H1535 mm - Weight: 596 kg

Stanje: novo, premer žaginega lista: 550 mm, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Minimal lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover Lodpforh Dkyox Ag Torr - Documentation - 400V

Stanje: novo, Leto izdelave: 2024, Underground Light-Alloy Circular Saw Lrodpfotuch Esx Ag Tor Brand: METALLKRAFT Model: ULMS 420 Article No.: 3627420 Condition: New machine Cutting range (square): 120 x 120 mm Speed: 2900 rpm Standard features include: - Saw blade 420 x 30 x 4.0 mm Z 120 - Minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction ports for connection to a dust extraction system - Operating manual

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nagib rezila -45° / +45°. Največja odprtina primeža 180 mm. Največja dolžina brez podajalnika 385 mm. Premer diska 350 mm. Hitrost vrtenja rezila 1700 / 3400 vrt/min - 2 hitrosti. Ljdpfxox Hw Sqs Ag Tsrr

Stanje: dober (rabljeno), Leto izdelave: 2016, premer žaginega lista: 600 mm, vrsta vhodnega toka: trifazni, obratovalni tlak: 8 letvica, Industrijski aluminijasti žagalni stroj, ki samodejno reže z uporabo pnevmatskega dvo-gumbnega upravljanja, pri čemer je obdelovanec dvakrat pnevmatsko vpet. Vpenjanje je nastavljivo tako vodoravno kot navpično. Poleg tega je ta žagalni stroj opremljen z megličnim mazalnim sistemom, ki izboljša proces rezanja. Podajanje žaginega lista je na tej napravi nastavljivo. Lastnosti: - samodejno gibanje žage - dvojno pnevmatsko vpenjanje - žagin list se premika od spodaj navzgor Lsdpfx Aszf U Tmsg Tjrr - žagin list iz trdo kovine - nastavljiva hitrost žaganja - dolžinski naslon - mazalni in redukcijski sistem - razpršilna instalacija - zračno pištolo - rezanje pod kotom - samodejno in ročno žaganje Stroj je nameščen in se dostavi montiran. Testiranje je možno.

Stanje: novo, Leto izdelave: 2026, Nastavitev kota rezanja horizontalno 15°- 90°15° brezstopenjsko, moč motorja žage 5,50 kW (400 voltov), premer žaginega lista 600 mm, delovno območje zadnji prislon 180 mm, delovna višina nastavljiva prek nog 940 do 1000 mm, 2 x odsesovalna nastavka (zgoraj v pokrovu in spodaj), neto teža 600 kg, dimenzije ŠxDxV 135x140x150 cm, RAL 9007 sivo aluminijasta, obračalna plošča iz brušenega nikljevega jekla, glava žage z vodili z krožnimi kroglicami za visoko natančnost, dolgo življenjsko dobo in visoko togost. Obratovalni material se lahko pri odprtem pokrovu prednapne z nizkim tlakom. Hidropnevmatski pomik lista, odvajanje ostružkov v smeri odsesovalnega pokrova. Veselimo se vašega sporočila! Plantec Maschinen GmbH Ljdpfxsfv T Ano Ag Tsrr

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine Lrodpfx Agepa Nxdo Tor - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders Lrjdpeidun Defx Ag Tjr - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm Lodpegwt Rrsfx Ag Torr • Saw blade: 350 mm • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Lrsdjgwt Rnopfx Ag Tsr Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm Lrsdpegwt Rysfx Ag Tsr • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling Lsdpfx Agsgcbwgj Tjrr • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Lsdpfxjgwt R Ds Ag Terr Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) Ljdpfxepa Nxaj Ag Terr The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table Lrodpfx Aoidun Ieg Ter - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH