Hydr. stroj za vodoravno tračno žago

BAUER S 260

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Premer reza 128 mm Dolžina tračnega lista / mm Fpjdpfsxbh Hfox Ahmeh Višina mize / mm

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Fpsdohpktvopfx Ahmoh Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: Teža stroja pribl.: 1750 kg Motor žage: 2,2 kW Skupna potreba moči: 5 kW Hitrost rezanja: 17 - 90 m/min Premer reza: 320 mm Maks. območje reza: 320 x 320 mm Dolžina tračnega lista: 4.930 x 34 x 1,1 mm Fpedpfevpt Eysx Ahmjh Dolžina podajanja: max. 9x 600 mm Potrebni prostor pribl.: 2,6 x 2,4 x 1,40 m Avtomatska tračna žaga, ravni rez, min. premer reza 10 mm, min. dolžina reza 6 mm, min. dolžina ostanka 15 mm (avtomatika 80 mm), maks. masa materiala 400 kg/m, rezervoar za hladilno tekočino 60 l, zmogljivost črpalke 16 l/min, napetost vpenjanja nastavljiva 20-60 bar, transporter ostružkov 2.400 x 950 mm, valjčna proga 2.200 x 950 mm, 5 kosov rezervnih tračnih listov 4.930 x 34 x 1,1 mm, navodila za uporabo

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Fpodpfxjg U Uv Rj Ahmoh Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2022, Technical details: Cutting diameter: 128 mm Saw band length: 1640 x 13 mm Saw band width: 0.64 mm Cutting range at 90° (round): 128 mm Cutting range at 90° (flat): 100 x 150 mm Cutting range at 45° (round): 90 mm Fsdou Nig Rjpfx Ahmeph Cutting range at 45° (square): 90 x 75 mm Band speed: 24 - 35 - 55 m/min Electrical connection: 220 V / Hz Total power requirement: 500 W Approx. machine weight: 80 kg Approx. machine dimensions (LxWxH): 0.95 x 0.52 x 1.1 m The machine is unused—as new—in its original packaging. The bandsaw is manually operated. Suitable for steel, cast iron, and non-ferrous metals. Workpiece clamping with vise jaws operated by handwheel; one fixed jaw and one movable jaw; clamping range 165 mm, swivel range 60°. Adjustable length stop up to max. 85 mm (i.d.).

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Fpodpfx Aheg Trvromoh Cutting speed: 40 + 80 m/min Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice.

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Brusni kamen desno premer 300 mm Fjdoyatx Sjpfx Ahmoph Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Merilni sistem KEL SET

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning Fpodpfx Aslb I Dajhmsh STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Electric motor, three-phase motor Fodpfxsuhr R Tj Ahmeph - Condition: unused - Manufacturer: Weg, electric motor type W22 315S/M-04 - Power: 132 kW - Speed: 1,488 rpm - Shaft: Ø 80 x 170 mm - Design: B3 - Protection class: IP 55 - Dimensions: 1280/640/H845 mm - Weight: 991 kg

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Fpedpfx Ahstv Rgrjmjh Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002