Mep Cobra 350 Sx nakup rabljenega (114)

Stanje: rabljeno, Leto izdelave: 2015, Premer reza 225 mm Dolžina tračnega lista 2450 mm Širina reza 240 mm Dimenzije tračnega lista 2450 x 27 x 0,9 mm Območje reza pri 90 stopinjah: ploščato 240 x 160 mm Območje reza pri 90 stopinjah: kvadratno 200 mm Območje reza pri 45 stopinjah: okroglo 160 mm Območje reza pri 45 stopinjah: ploščato 155 x 115 mm Območje reza pri 45 stopinjah: kvadratno 140 mm Območje reza pri 60 stopinjah: okroglo 90 mm Območje reza pri 60 stopinjah: ploščato 90 x 90 mm Območje reza pri 60 stopinjah: kvadratno 90 mm Teža stroja cca 240 kg Oprema: Rodpfxjx Hp Dxs Abhsn - Ročni tračni žagalni stroj - Enostransko poševno rezanje - Samodejno spuščanje žagalnega loka - Rezi od 0° do 60° levo - Naprava za hlajenje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, vrsta vhodnega toka: Enosmerni tok, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, največja višina reza: 285 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Rjdpfx Aoxyywmebhen Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Redpfx Aexnpggjbhon Year of manufacture: 2018 Condition: very good, lightly used Operating hours: 2128 h Cutting time: 1738 h Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 x saw blades

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019) Rodpfoxnpf Ajx Abhsn Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw Year of manufacture: 2019 Condition: used, very good, tested and cleaned Operating hours: 1750h Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable cutting speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318 Tehnični podatki: - Ročni tračni žagalni stroj - Dimenzija žaginega traku: 2375 x 20 x 0,9 mm - 2 hitrosti rezanja: N 33 / 66 o/min Rsdpfjxta N Aex Abhon - Največja vpenjalna zmogljivost: 205 mm - Nastavljiv kot rezanja levo + desno: 30° - Rezni razpon: - 90° okroglo: 160 mm - 90° kvadratno: 160 mm - 90° ploščato: 200 x 100 mm - 45° levo + desno okroglo: 140 mm - 45° ploščato: 140 x 60 mm - Pogon: 400 V / 1,5 / 1,8 kW - Opremljenost s hladilnim sredstvom - Odvodni valjčni transporter z omejevalom: 3000 mm - Dovodni valjčni transporter: 1500 mm - Teža: pribl. 350 kg - Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, skupna višina: 750 mm, skupna dolžina: 450 mm, skupna širina: 450 mm, Bandsaw machines - base frame with front flap color RAL 6011 reseda green Redpfxjvzak Hj Abhjn

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade. Rsdpfx Aechhfusbhen

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Rsdpecgbt Refx Abhen Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, MEP TIGER 352 NC 5.0 [Fully Automatic] Article Number TI352NC Motor Power 3.0 kW Vise Opening 190 mm Blade Dimensions 350x32x2.5 mm Weight 680 kg Blade Speed 15 - 90 m/min Cutting Capacity 0° 115 / 95 / 180x95 mm Cutting Capacity 45° Right 110 / 95 / 125x95 mm Rjdpfx Aochhhdobhon Cutting Capacity 45° Left Cutting Capacity 60° Right Cutting Capacity 60° Left Description Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, enabling series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP control system, allowing up to 1,000 different cutting programs, each with individual cutting length and piece quantity for consistent material thickness. FEATURES: - New centralized control console on an articulated arm, so the operator can easily reach the emergency stop button from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial port. - Display with 20 characters x 4 lines to show the following technical parameters: + Blade speed + Number of programmed and completed cuts + Blade thickness + Feed length + Cutting time + Amperemeter + Display of over 100 diagnostic messages and alerts - NEW: Display and entry of alarm and error messages, with the option to view occurred incidents. - NEW: 600 mm material feed with stepper motor and ball screw, mounted on opposing ball bearings. - NEW: Electronic inverter for continuous blade speed adjustment from 15 to 90 rpm (optional 30 to 150 rpm). - NEW: Low-voltage control panel: Polyester membrane keypad with thermoformed and raised tactile buttons and operation confirmation signal. - Dual gear set for high sawing performance. - The saw head slides on linear double ball recirculation guides. - Coaxial cylinder with bypass valve for rapid approach and a potentiometric linear transducer for detecting head position. - Stroke of the saw bow programmable directly from the control panel for adaptation to the cutting material. - Adaptive cutting force control. - Swivel table with central pin and axial bearing for precise execution of miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. - Chip removal brush. - Signaling lamp for program end or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm for solid and profile material. - Prepared for the installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication. For further technical data, please refer to the attached PDF document.

Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 375 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description: - Saw bow, vise unit, and base made from robust cast iron - Precision angle indicator integrated into the cast iron frame - Electrical system (with fully identifiable wiring and low-voltage system 24 V) - IP 55 selector handle for manual operation (where applicable) - Rotating chip brush for the saw blade - Quick-closing device with vise for rapid approach - Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left Rjdpfx Abecgbp Ishon - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts list in the user’s language - SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed - CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines - Quick-set vise - Hydraulic converter for blade tension display - Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame - MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item Number SH281SXI Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 435 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description Semi-automatic function: The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically. Key Features: - New, centralized control panel mounted on an articulating arm - Latest generation hydraulic control unit, highly efficient with low energy consumption - Base frame with removable coolant tank The machine complies fully with all CE regulations! Please refer to the attached PDF document for further technical specifications.

Stanje: novo, Motor power: 1.1/2.2 kW Vice opening: 130 mm Blade dimensions: 350x32x2.5 Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 mm Cutting capacity at 45° right: 100 / 85 / 90x80 mm Cutting capacity at 45° left: 75 / 75 / 90x65 mm Cutting capacity at 60° right: — Cutting capacity at 60° left: — Description Manual mitre chop saw for miter cuts from 45° right to 45° left, offering high cutting performance. Constructed from robust cast iron, practical and safe for every cut. FALCON 352 is available as a bench model or with a stand (optional accessory). The machine comes equipped with a two-speed three-phase motor. On request, a pneumatic vice is available (FALCON 352 MA, the vice automatically closes when lowering the head). This version is always supplied with a stand. Standard equipment: - Externally adjustable clutch - Locking device with vice - Slideable on prismatic guide with adjustable rail - Fixed vice jaws with axial adjustment for clamping the workpiece directly at the cutting line - Adjustable chip removal bracket, fully manufactured from steel - 48 V electric coolant pump for blade cooling and lubrication - Double return spring for securing the loading platform - Machine can be hoisted - Worm shaft mounted on bearing pair - Saw blade spindle mounted on offset shaft - Two speeds: 30 and 60 rpm - Vice opening 130 mm - Machine is supplied without saw blade. Rsdpfx Aocgrkyobhsn Electrical equipment: - Electrical control panel - Labeled cable connections - Main safety switch prepared for padlock - Emergency stop device - Phase failure protection - Speed selector switch - Thermomagnetic protection - Undervoltage release - Motor with protection class IP 54 - Low voltage circuit 24 V - Electric coolant pump 48 V - Motor 1.1/2.2 kW – 400 Volt For further technical specifications, please refer to the attached PDF document.

Stanje: novo, MEP TIGER 372 CNC LR 4.0 Article Number: TI372CNCLR Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Description: Electromechanical vertical circular saw with semi-automatic operation, designed for use with HSS saw blades to perform precision cuts from 45° right to 60° left. Equipped with multi-micro processors and two controlled axes, allowing programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm length) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush - Machine prepared for pallet truck transport, includes tools and operating manual Electrical Equipment: - Control panel - Programmable for 80 different cutting programs - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle, protection class IP 55 - 24V low-voltage system - Electric coolant unit for blade lubrication and cooling (option for micro-spray system) - Motor 4.0 kW - 400V MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Article Number: TI372CNC LR 4.0 RC Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Description: Automatic electromechanical vertical circular saw for use with HSS saw blades, designed to execute series cuts with automatic mitre adjustment between -45° and +45° on steel. In semi-automatic cycle, mitre cuts between -45° and +60° can be made. Equipped with multi-micro processors and two controlled axes, enabling programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush Electrical Equipment: - Control panel - Programmable for 80 different cutting programs Rsdpfjchkyrox Abhen - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage rele

Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, steplessly adjustable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Rsdpfxechhdie Abhjn Description Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw blade length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10m) Simple touchscreen operation Saw arm made from spheroidal graphite iron – robust and stable Space requirement: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep For further technical data, please refer to the attached PDF document.

Stanje: novo, Saw blade diameter 350 mm Cutting range at 90 degrees: round 115 mm Cutting range at 90 degrees: square 95 mm Cutting range at 90 degrees: rectangular 180 x 95 mm Working height 925 mm Saw blade speeds 15+30+45+90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.38 t Space requirement approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right. Rodsfgpdljpfx Abhen

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. Rsdpfx Aofg Rlcobhon The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Length: 1500 mm Redsfxu Tkjpfx Abhen 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 – 1030 mm Required space: 1500 x 250 x 650/1030 mm

Stanje: skoraj kot novo (rabljeno), Overall length: 1500 mm Rodefn Thhopfx Abhon Width: 500 mm Height adjustable with leveling feet: +/- 900 mm 6 rollers, diameter: 60 mm Roller width: 430 mm

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 080024-38 U, Offer 23332 Technical Specifications: Rjdpep Ebn Sefx Abhjn - Saw blade dimensions: 250 x 2 x 40 mm - Saw blade spindle speed: 52 rpm - Cutting capacity at 90° round: 80 mm flat: 95 x 60 mm - Mitre adjustable up to: 45° - Material vice - Drive: 400 V / 0.5 kW - Space requirement approx.: W 650 x H 1500 x D 750 mm - Weight approx.: 100 kg

Leto izdelave: 2001, Stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm - Multiple stroke - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction Redpfx Asd Aai Tobhsn - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Rjdpfefg E H Esx Abhen Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950x27x0.9 mm Table height: mm (not specified) Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Space requirement: approx. m (not specified) Absolute special price!! 7,170 EUR (Current price as of 2024 is 9,425 EUR) Rsdpfx Aofg E H Nsbhen Standard equipment: - Vice with quick adjustment and adjustable guide rails - Hydraulic blade tensioning device with tension pressure gauge - Base frame with removable coolant tray - Chip removal brush - Precision stops set for cuts at: 0°, 45° and 60° to the left and 45° to the right - Rotary table for double miter cuts - Electric coolant system 48 V (Option to install a micro-spray device)

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. Redpfxefg E Hye Abhon FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Rjdpfsfg E H Djx Abhon Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Rjdpfefg E H Ijx Abhen Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible. Rsdpfx Ajuwrv Dsbhon