Tračne žage - vodoravno

MEP SHARK 512 SXI EVO

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: Tsdpfxjxaa Tzs Abgsf - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Tjdpfx Aboifk Rbogsf Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Tedpfxjfg E H Tj Abgjf Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts Tedsfgyh Uepfx Abgof 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine Zopf - incl. digital display - three powered rollers with smooth surface - manual adjustment of the upper roller - working position horizontal and vertical - Model ZB 30/3 MD - shafts supported with tapered roller bearings - use of interchangeable guide rails on the guide carriage - roller diameter 76–86 mm - shaft diameter 20 mm Tedpsdktnvofx Abgjf - shaft speed 11 rpm - drive motor 0.18 kW - bending capacity round tube 30 mm - flat bar 25x6 mm - angle iron 20x20x4 mm - weight 80 kg

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 0102-240014, This Voortman bandsaw is designed for the economical cutting of structural steel profiles up to a profile size of 1000 mm and a profile length of 19,000 mm. This horizontal bandsaw is engineered for double-sided mitre cuts. The profile length to be processed (X-axis) is positioned within the bandsaw using a measuring carriage. Todpfxor Hrrlo Abgef

Stanje: novo, Table diameter 315 mm Horizontal table load 50 kg Tjdpfoi Hg I Dsx Abgjf Vertical table load 25 kg Chuck diameter 200 mm Speed 0 - 5 rpm, steplessly adjustable Swivel range 90 degrees Tilt adjustment: manual/motorized manual Connection voltage 230 V Machine weight approx. 45 kg Space requirement approx. 800 x 600 x 600 mm Welding turntable with - Integrated stand and universal torch holder - Quick-action chuck 200 mm - Foot switch - Manually tiltable/swivable - Stepless speed adjustment

Leto izdelave: 2011, obratovalne ure: 5.900 h, Stanje: rabljeno, Intended use: Construction For more information, please contact Mohamad Fattah Ahmad. ICE 28 RFS + Hydraulic Power Pack 525 RF Year of manufacture: Vibrator: 2011 Hydraulic Power Pack: 2004 Very good condition Further information available upon request! Todpfx Ajh Tyydsbgef

Stanje: novo, Leto izdelave: 2024, Shrink wrapping machines with simplified technology, advanced control logic, and cycle management, designed to guarantee high performance applications along with great user-friendliness and easy maintenance. Tjdjhtuu Aspfx Abgof Warranty: 12 months (single-shift operation) Technical data: Sealing area W x L: 420 x 550 mm Max. product height: 150 mm Mains voltage: 230 V - 1 Ph Power: 3 kW Dimensions L x W: 1235 x 750 mm Working table height with trolley: 920 mm

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg Tedpfxsfxw H As Abgef - Dead weight: 850 kg - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control