Drugi stroji

MEP PH 261-1 HB

Stanje: novo, Cutting diameter: 225 mm Cutting capacity at 90° (flat): 245 x 150 mm Cutting capacity at 90° (square): 200 x 200 mm Cutting capacity at 45° (flat): 160 x 140 mm Cutting capacity at 45° (round): 160 mm Cutting capacity at 45° (square): 140 x 140 mm Cutting capacity at 60° (flat): 110 x 80 mm Cutting capacity at 60° (square): 90 x 90 mm Cutting capacity at 60° (round): 90 mm Vice opening: 245 mm Blade speed range: 46/92 m/min Saw blade dimensions: 2450 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 240 kg Space requirement: approx. 1,530 x 900 x 1,720 mm Equipment: - Compact, robust manual bandsaw - Single-sided mitre device up to 60° to the left - Hydraulic lowering of the saw bow * Infinitely variable feed adjustment * Automatic shut-off at end of cut - 2x bandsaw speeds Gisdjxaa Dyjpfx Agwsp - Carbide-tipped blade guides - Manual vice with quick-release - Machine stand - Coolant system - Manual blade tensioning (star knob at the front) - 1x angle stop - 1x metal bandsaw blade - Operating manual

Stanje: novo, Leto izdelave: 2024, Manual band saw machine for cuts from 0° to 60° to the right. Hydraulic blade tensioning, bow handle with control button. Combination blade guide with side bearings. Carbide cutting inserts and an upper bearing. Manual cutting or also possibility of unattended cutting, using the saw bow’s own weight, regulated by hydraulic brakes; afterwards, the bow is manually raised back to the desired position. Manual vise for quick and precise clamping of the workpiece. Swiveling of the saw bow from 0° to 60° to the right with locking positions, precise angle measurement, manual quick-action vice with quick clamping lever. Millimeter-graded scale rod. Coolant tank integrated on the upper side of the base frame with discharge nozzle and electric coolant pump for cooling both sides of the saw blade guides. Control voltage 24 VAC, main switch and control system. Maximum circuit and short-circuit protection. Connection voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and grey RAL 7036. You are always welcome to inspect the desired machine in our manufacturing/showroom facility. Please feel free to contact us for an appointment. Godegculvopfx Agwoip Plantec Maschinen GmbH

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Godpefrztxofx Agwoip Load capacity: 1000 kg Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Machine weight: approx. 0.22 t Space requirement: approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operations. Widely applicable for workshops, assembly departments, loading bays, etc.

Stanje: novo, 10 ft storage container, new – Please enquire about availability via email! Specification as follows: - Exterior paint: RAL 5010 gentian blue - Cathodic dip coating (grey tone) - Forklift pockets spacing: 950 mm - Galvanised locking rods - Laminated plywood flooring, 20 mm thick, coated - Container corners top and bottom - Stackable up to 3 units high - Can be handled by crane and forklift External dimensions 10 ft storage container (LxWxH): 2991 x 2438 x 2591 mm Gjdpsf Nzxlofx Agwjip Tare weight: 825 kg, Payload: 10,000 kg Also available as 8 ft storage container, price €2,790 plus VAT. Specification as above, External dimensions 8 ft storage container (LxWxH): 2438 x 2200 x 2260 mm Tare weight: 630 kg, Payload: 3,500 kg Purchase price ex works 26810 Westoverledingen. Delivery available at additional cost. Please enquire about delivery charges via email, quoting the delivery postcode.

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V - Main motor power [kW]: 1.1 / 1.5 - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Giodpfoudi Uzjx Agwep Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: novo, Leto izdelave: 2026, The CORMAK ZS-40B industrial column gear drill is a robust tool with high potential. Featuring a rotating, height-adjustable head, automatic threading device, and a precise handwheel, it ensures flexibility and accuracy in operation. Its powerful motor delivers high drilling performance, while the sturdy construction and hardened oil-bath gearbox gears guarantee stability and durability. The machine is supplied with a tapping chuck set, extending the capabilities of this professional equipment. Additionally equipped with power feed and a cooling system. Machine Features - High flexibility thanks to the rotating head with height adjustment - Cooling system - Left/right spindle rotation, automatic threading device - Precise handwheel with depth gauge - Hardened oil-bath gearbox gears - High stability and precision of machined parts thanks to a solid base - Powerful motor ensures excellent drilling performance - Rigid, thickened column with ground surface - Large rotary table with height adjustment - Vice setup option Technical Data DRILLING CAPACITY (CAST IRON/STEEL) 40/32 mm THREAD CUTTING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115 mm SPINDLE TO COLUMN DISTANCE 260 mm MAX. DISTANCE SPINDLE NOSE TO WORKTABLE 754 mm MAX. DISTANCE SPINDLE NOSE TO BASE 1270 mm SPINDLE TAPER MT4 SPINDLE SPEEDS 50 - 2520 rpm NUMBER OF SPEEDS 6 FEED RATES 0.12; 0.18; 0.25 mm/rev WORKTABLE DIMENSIONS 354x575 mm OVERALL HEIGHT 2120 mm MOTOR POWER 1.5 kW SUPPLY VOLTAGE Giedporidv Sofx Agwsp 400 V/50 Hz WEIGHT 350 kg

Stanje: novo, Cutting capacity round 0°: 150 mm Cutting capacity square 0°: 150 x 150 mm Cutting capacity flat 0°: 150 x 165 mm Cutting capacity round 45°: 115 mm Cutting capacity flat 45°: 115 x 130 mm Cutting capacity round 60°: 60 mm Cutting capacity flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw bow swivels up to 60° - Equipped with 2 blade speeds for optimal adjustment to the workpiece - Ideal for machining pipes, sectional steel, and solid materials made of stainless steel, iron, etc. - Generously dimensioned saw arm for vibration-free operation - Saw arm lowering via hydraulic downfeed cylinder - Low-noise operation thanks to robust construction - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Including base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 TPI Godjilk E Depfx Agwjip - Quick-release vice - Material stop - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2450 mm Cutting width: 250 mm Cutting speed: 40 / 80 m/min Saw band dimensions: 2450 x 27 x 0.9 mm Gisdpfx Ajlb I A Sjgwjp Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 90 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° rectangular: 160 x 110 mm Cutting capacity at 90° rectangular: 250 x 190 mm Total power requirement: 0.75 / 1.1 kW Table height: 925 mm Machine weight: approx. 218 kg Required space: approx. 1300 x 700 x 1530 mm

Stanje: novo, Cutting diameter: 180 mm Cutting capacity at 90°: square 180 x 180 mm Cutting capacity at 90°: flat 200 x 150 mm Cutting capacity at 45°: round 115 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 125 x 110 mm Cutting capacity at 60°: flat 70 x 70 mm Cutting capacity at 60°: square 70 x 70 mm Cutting capacity at 60°: round 70 mm Blade speed range: 40 / 80 m/min Giodpfx Asxaa Tnogwjp Saw blade length: 2,130 x 20 x 0.9 mm Total power requirement: 0.75 kW Machine weight approx. 190 kg Equipment: - compact / robust manual band saw - with single-sided mitre device up to 60° to the left - hydraulic lowering of the saw bow * infinitely variable feed adjustment * automatic cut-off at end of cut - 2x saw blade speeds - saw blade guide with carbide plates - manual vice with quick-release - machine base - coolant system - manual saw blade tension (star grip at front) - 1x angle stop - 1x metal saw blade - operating manual

Stanje: rabljeno, Tailstock, counter bearing for dividing head, indexing device - Centre height: 112 mm - Mount: MK2 (Morse taper 2) - Drawing available in photos Gijdpfxob Hbx Rs Agwjp - Dimensions: 155/120/H115 mm - Weight: 4 kg