Klin nakup rabljenega (689)

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Isdpfegyd T Ejx Ah Aetr Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: rabljeno, Leto izdelave: 2000, Overview This bottle washing machine from the German manufacturer Klinger was built in the year 2000. The cleaning machine is constructed entirely of stainless steel, features a Siemens S7 control system, dual heaters, and surge pumps for high cleaning performance. Technical Data Capacity: 9,600 bottles/hour; 20 bottles per row Iodjtxd A Sopfx Ah Aotr Scope of Delivery - Bottle Washing Machine | Klinger | Euroklasse-D 20/1/73 | 2000 - Water Treatment System | Hager + Elsässer | 2000 including cation and anion exchangers, salt tank, pre-filter, and UV probe with a capacity of 5 m³/h The water treatment system is designed to operate both the bottle washer and the RO unit - Reverse Osmosis System | Hager + Elsässer | 2000 with a full demineralization capacity of 2.5 m³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, Drill diameter: 50 mm Total power requirement: 2.2 kW Machine weight approx. 0.6 t Drill Grinder KLINGEL Type BSA 50 Year of manufacture: 1981 Drill diameter: 3 - 50 mm Point angle: 50 degrees Point angle: 50 - 180 degrees Drive power: 2.2 kW Weight: 600 kg Electrical diagrams are available - operating manual not included Itedpfx Aowu Hklsh Aer

Leto izdelave: 2000, Stanje: dober (rabljeno), Klinger bottle washing machine, year of manufacture: 2000, capacity approx. 10,000 bottles/hour, Siemens S7, volume cell, currently set up for 330 ml + 500 ml + 500 ml swing-top bottles. Bottle diameter: 50–90 mm / bottle height: 110–330 mm. Iodpfx Aheiuw Ixs Ajtr

Stanje: rabljeno, Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air -Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 -Rotor: diameter: 2570 mm -Speed: 8 rpm Iedsul H D Ropfx Ah Astr -Dimensions: 4066/2750/H460 mm -Weight: 850 kg

Stanje: rabljeno, Humidifier for ventilation systems – Klingenburg A total of 4 units available. The price is per unit! For further details and scope of delivery, please refer to the photos. Technical specifications can be found on the nameplate. Itsdpfstzxtvsx Ah Aor Item condition: used, untested No original packaging Sample pictures Inspection in Wettringen is possible! For further questions, please contact us via email. Sale exclusively to commercial customers for business purposes only and under exclusion of any warranty for material or legal defects! By making a purchase, you confirm that you are acting in a commercial or self-employed capacity. Otherwise, you are violating our terms and conditions!

Leto izdelave: 1960, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Itodpfx Asgyd S Soh Aer Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been completely overhauled and is therefore in very good condition.

Stanje: zelo dobro (rabljeno), Komplet strojev za recikliranje 2x Dinamični pralni stroj K K recykling s 30 Evolution Peskolovec z opremo Itodpsw Spkzefx Ah Asr 1x Dinamični pralni stroj s 55 Evolution Trakasti transporter X 4 Rotacijsko režasto sito Krmilna omara

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 1.430 h, nosilnost: 1.600 kg, dvižna višina: 5.200 mm, prosto dvigovanje: 1.800 mm, gradbena višina: 2.350 mm, kapaciteta baterije: 465 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, Stöcklin EFI 1600 Seated pallet stacker with initial lift. Perfect condition. Lifts 1,600 kg. "2-in-1 machine" – suitable for daily pallet handling of up to 2,000 kg that can be initially raised with the lift. Additionally, it can be used as a stacker when you need to place pallets onto racking or similar. Load capacity on forks: 1,600 kg. The initial lift allows you to overcome uneven ground, e.g. height differences between two halls, thresholds at doorways, etc. Furthermore, you can transport two pallets at the same time. Very easy to maneuver, features an ergonomic driving position, and easy entry and exit. The machine is in impeccable condition. Lift height: 520 cm Iodpfxou T Ecas Ah Ajtr Overall height: 235 cm (with lowered frame) Year: 2001 Operating hours: 1,430 Large battery: 24V 465Ah Battery year: 2021. Measured remaining battery capacity: 96% Includes charger. Transport can be arranged.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, maksimalni metrični navoj (korak): 500 mm, minimalni korak metričnega navoja: 1 mm, dolžina brušenja: 500 mm, premer brusilnega koluta: 500 mm, vrtljajska hitrost (min.): 1 obr/min, minimalni premer metričnega navoja: 10 mm, največja hitrost vrtenja: 26 obr/min, največji premer metrickega navoja: 350 mm, dolžina vpenjanja: 1.200 mm, širina brusilnega kolesa: 60 mm, največja hitrost vretena: 26 obr/min, hitrost vretena (min.): 1 obr/min, hitrost vretena za brušenje: 3.000 obr/min, moč motorja brusilnega vretena: 12.000 W, premer brušenja: 350 mm, hitrost brusnega kolesa: 3.000 obr/min, vrsta vhodnega toka: trifazni, širina na sredini: 150 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, KLINGELNBERG HSS 350 Grinding Machine – Special Offer Due to Inventory Change High-precision CNC grinding machine ideal for gears, worm screws, and special components. Ready for immediate operation. 🛠 Main Technical Specifications: • Workpiece diameter (max./min.): 350 mm / 10 mm • Through bore of clamping head: 130 mm • Distance between centers: • With front center: 750 mm • With rear center: 1200 mm • Maximum workpiece length: Unlimited • Maximum shaft diameter (left/right): 130 mm / 150 mm • Maximum grinding length: 500 mm • Maximum number of teeth: 30 • Module (max./min.): 25 / 0.5 • Pitch (max./min.): 500 / 1 • Lead angle (max./min.): 30° / 0° • Maximum helix angle: 45° ⚙️ Grinding System Features: • Grinding wheel diameter (max./min.): 500 mm / 300 mm • Grinding wheel speed (adjustable): 75 – 3000 rpm • Maximum cutting speed: 45 m/s • Main drive motor power: 12 kW • Workpiece rotation speed (adjustable): 1 – 26 rpm 📐 Grinding Wheel Width: • Thread grinding: 15 mm • Worm screws up to module 12: 25 mm • Module 12 to 20: 40 mm • Module 20 to 25: 60 mm Itsdpfx Ahshq Uh He Ajr 💻 CNC Control: FANUC Series 21-It ✅ Ideal for:  Gear manufacturers  Spindle and worm screw production  Precision engineering workshops  Industrial machinery repair 📌 Limited offer due to equipment upgrade Take advantage of this opportunity to acquire a high-performance CNC grinding machine with professional specifications and immediate availability!

Stanje: dober (rabljeno), Leto izdelave: 2002, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer Iodpfx Ajw N S E Ajh Aetr - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 1999, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) Itedpfxor A Hcbs Ah Asr • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, obratovalne ure: 2.174 h, nosilnost: 1.600 kg, dvižna višina: 3.400 mm, prosto dvigovanje: 1.800 mm, težišče tovora: 600 mm, gradbena višina: 2.300 mm, kapaciteta baterije: 270 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm, Stöcklin EHI 1600-P Pallet stacker with stand-on platform, initial lift and power steering. Perfect condition. Lifts 1,600 kg. Itjdpfx Aheu T Edqo Aor “2-in-1 machine” – it can be used for daily handling of pallets up to 2,000 kg that can be moved with the initial lift. Additionally, it can be used as a stacker for placing pallets into racks or similar applications. Load capacity on forks: 1,600 kg. With the initial lift, you can drive over uneven ground, e.g., differences in floor level between buildings, thresholded doors, etc. It also allows you to transport two pallets at the same time. Very easy to maneuver, comfortable ergonomic driving position. The machine is in excellent condition. Lifting height: 340 cm. Overall height: 230 cm (with chassis lowered) Year: 2006 Hours: 2,174 Battery: 270 Ah with 58% remaining capacity. Includes charger. Transport can be arranged.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high Iodpfx Ahjul Efms Astr precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 1971, Stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Iedpfehpqqusx Ah Aetr Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, obratovalne ure: 5.834 h, nosilnost: 1.600 kg, dvižna višina: 3.400 mm, prosto dvigovanje: 1.800 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: prosto dvigalo s teleskopsko roko, gradbena višina: 2.300 mm, kapaciteta baterije: 465 Ah, napetost baterije: 24 V, dolžina vilic: 1.150 mm,

Stanje: dober (rabljeno), Leto izdelave: 2007, Wheel diameter – max. 500 mm Wheel width 200-400 mm Module 12 Speed 0-3,250 rpm Braking torque up to max. 95 Nm Inner taper: Taper #39 Control: Fanuc 16 Total connected load: 15 kW Machine weight approx. 6 t Space requirement approx. 2,350 x 2,240 x 2,500 mm Itodpfxovr Hf Ej Ah Ajr HIGHLY FLEXIBLE TESTING OF HARD, FINISHED, AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear test machine is a CNC inspection machine with three linear axes for fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers a wide range of objective and subjective testing options with speeds up to 3,250 rpm and braking torques up to 95 Nm.

Leto izdelave: 1955, Stanje: rabljeno, številka stroja/vozila: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2,950 kg Machine No.: 1331 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Broaching length: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shafts up to 26 mm width Through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (restricted by oil and chip tray) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shafts • The machine features a movable coolant and cutting fluid system for 2 media • The machine comes with an oil and chip tray and a tool feed carriage Itedodbr H Tjpfx Ah Ajr Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is very clean in the guideway and cylinder areas. Broaching tools and arbors can be supplied upon request. The machine is available for viewing and demonstration, powered up in our warehouse.

Leto izdelave: 1958, Stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Iodpfx Aheda Ugie Ajtr Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools Iodpfx Aodl Uzkoh Aetr • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Isdpjdffzfefx Ah Aetr Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1951, Stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Iodpjdcdrpjfx Ah Ajtr Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1956, Stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Iedpfx Ahedbmgmo Astr Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1960, Stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Ijdpfeui Sbjx Ah Aotr Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Stanje: rabljeno, Leto izdelave: 1990, maks.: vlečna sila 25.000 kg maks.: dolžina orodja 3.520 mm maks.: hitrost rezanja 9,6 m/min prehodna širina: 520 mm Stroj je obdeloval ojnice in pokrove ojnic. Stroj je zasnovan za množično proizvodnjo (izhod: 400 kosov/uro) Isdocm Eiwspfx Ah Ajtr