Lippert poševni izmetnik 45°

Lippert

Stanje: rabljeno, Lippert valjčna krivina 90° 980-900 IR900 Pgsdpfx Aepdv Rionpeu RA2114 Tehnični podatki: Stanje: dobro (rabljeno) Motor: popolnoma delujoč Kot: 90° Notranji radij (IR): 900 mm Nazivna/zunanja širina (NB): 980 mm Uporabna širina (NUB): 900 mm Razmak valjev: 75-125 mm Tip motorja: SEW trifazni motor, R40DT71D4BM Moč motorja: 0,37 kW, S1, 50 Hz Obseg dobave: brez podpore (po potrebi prosimo povprašajte) Opcijsko: podpore Cene neto plus DDV iz centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg Za individualno in strokovno svetovanje nas kontaktirajte. Pokličite ali nam pišite preko e-pošte. Z veseljem vam pomagamo pri načrtovanju in izvedbi vaših projektov. Veselimo se vašega povpraševanja. Lep pozdrav Ekipa Dr. Sonntag GmbH & Co. KG Vaš specialist in kontakt za intralogistiko

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Side guides (one-sided or double-sided) Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Pedpfx Asmqty Ujnpogu Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 1992, Lippert Belt Conveyor Belt Band Conveyor GF 19530-750-600 RA2268 Technical Data: Conveying length (NL): 19,530 mm Frame width (NB): 750 mm Belt width (GuB): 600 mm Construction height (BH): 120 mm Support feet: available as an option Conveying speed (v m/s): Please contact us so we can accommodate your preferred conveying speed Drive: SEW geared motor Electrical data: 50Hz, V380-500, 0.75 kW S1 Drive drum: Ø = 81 mm Pgsdpfx Aortu A Ssnpsu Return roller: Ø = 81 mm Optionally available: • Supports • Side guides (single-sided or double-sided) • Frequency inverter for stepless speed adjustment • Custom length (longer/shorter) Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Lippert incline conveyor, decline conveyor, belt conveyor, conveyor belt GF 800+6450+5550-750-600 RA2128 Technical Data: Conveyor length (NL): 12,800 mm (800 mm lead-in + 6,450 mm incline belt + 5,550 mm top curve) Frame width (NB): 700 mm, 800 mm with motor Belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Incline angle: 15° Support feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH Electrical data: 50Hz V380–500, kW 0.75 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optional equipment: Supports Side guides (single-sided and double-sided) Frequency inverter for stepless speed adjustment Length modification (longer/shorter) All prices net plus VAT ex central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg For an individual, professional consultation simply get in touch with us. Contact us by phone or email. Pgsdpjrudbuofx Anpou We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2015, Lippert, tračni transporter, tračni sistem, GF 29400-770-650 RA2131 Tehnični podatki: Dolžina transporterja (NL): 29400 mm Širina okvirja (NB): 770 mm Širina traku (GuB): 650 mm Višina (BH): 120 mm Podporna stopala: na voljo kot dodatna oprema Hitrost transporterja (v m/s): Obrnite se na nas in poskušali bomo zagotoviti želeno hitrost transporterja. Pogonski sistem: SEW motor z reduktorjem, R43DT100LS8/4 Pgedpfx Ansrupu Hjpju Električni podatki: 50 Hz, V380-500, kW 0,66/1,3 S1 Pogonska valj: Ø = 81 mm Povratna valj: Ø = 81 mm Na voljo kot dodatna oprema: Podpore Stranska vodila, enostranska in dvostranska Frekvenčni pretvornik za brezstopenjsko uravnavanje hitrosti Prilagoditev dolžine (daljše/krajše) Cene so navedene neto, brez DDV, odvisno od lokacije centralnega skladišča Dr. Sonntag GmbH & Co KG, 97076 Würzburg. Za individualno in strokovno svetovanje nas preprosto kontaktirajte. Obrnite se na nas po telefonu ali po e-pošti. Z veseljem vam pomagamo pri načrtovanju in izvajanju vaših projektov. Veselimo se vašega odgovora. S prijaznimi pozdravi Vaša ekipa Dr. Sonntag GmbH & Co. KG Vaš strokovnjak in partner za notranjo logistiko.

Stanje: rabljeno, Lippert lead-on, lagging, and belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Data: Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): Speed is adapted to the main conveyor via gear ratio Drive: Timing belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options: Supports Side guides (one-sided or double-sided) Pgsdpfjmqtzcsx Anpeu Please note: A suitable sprocket must be installed on the output shaft for the timing belt drive. Therefore, a different return roller may be required. Please contact us for further information. Defective belts are replaced before delivery. Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We will gladly assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor GF 780-650-500 RA1397 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. Side guides and/or photoelectric sensors can be installed upon request for an additional charge. Support stands are not included in the scope of delivery; these are optionally available on request. The shown images of the conveyor system were taken while still installed in a logistics center. Technical Data: Conveyor length (NL): 780 mm Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): freely adjustable via frequency inverter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Drive drum (AT): Ø = 64 mm Return roller (UR): Ø = 34 mm Belt: Type SNB 5 E Year of manufacture: 2001 Pgodpfxok Aa Uco Anpou Optional accessories: - Support stands - Side guides Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt was manufactured in 2001 and is in good used condition. The belt conveyor is equipped with a SEW brand motor and a MOVIMOT frequency inverter for speed control. Side guides and/or photoelectric sensors can be installed upon request for an additional charge. Support legs are not included in the scope of delivery but can be optionally supplied on request. The photos shown were taken while the conveyor system was still installed in a logistics center. Technical Data: - Conveyor length (NL): 3,000 mm Podpfx Ajk Aa U Denpegu - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Overall height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): adjustable upwards and downwards via frequency inverter - Drive: SEW geared motor S37 DT71D4/MM03/BW1 - Electrical data: 50Hz, V380-500, kW 0.075 / 0.37 / S1 - Return roller (UR): Ø = 34 mm - Drive drum (UR): Ø = 81 mm - Belt: Type SNB-8E - Year of manufacture: 2001 Optionally available: - Support legs - Side guides Net prices plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, please do not hesitate to contact us. Contact us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Incline with Curve and Straight Section GF 6150-650-500 RA1440 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor featuring a MOVIMOT frequency inverter for adjustable speed control. Side guides and/or light barriers can be installed upon request for an additional charge. Support stands are not included in the delivery but are optionally available upon request. The images shown of the conveyor system were taken while it was still installed at a logistics center. Technical data: Conveyor length (NL): 6150 mm (incline 2310 mm + upper straight 3840 mm) Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support stands: optionally available Conveying speed (v m/s): infinitely adjustable with frequency inverter Drive: SEW geared motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380–500, kW 0.15 / 0.75 / S1 Return roller (UR): Ø = 34 mm Drive pulley (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline / Decline: adjustable Options available: Support stands Single-sided and double-sided side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, expert advice, please do not hesitate to contact us. Feel free to call us or send an email. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics Pedpfxek Abawj Anpogu

Stanje: rabljeno, Leto izdelave: 2001, Lippert Belt Conveyor Inclined Belt GF 6960-650-500 RA1459 The Lippert conveyor belt was manufactured in 2001 and is in good (used) condition. The belt conveyor is equipped with an SEW motor featuring a MOVIMOT frequency inverter to regulate speed. Side guides and/or light barriers can be installed on request for an additional charge. Support stands are not included in the scope of delivery; they are available as optional extras upon request. The photos of the conveyor system were taken while the equipment was still installed in a logistics center. Technical Data: Conveyor length (NL): 6960 mm (inclined belt) Pgsdpjk Abbfefx Anpeu Frame width (NB): 650 mm Belt width (GuB): 500 mm Construction height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): continuously adjustable via frequency inverter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz, 380-500V, kW 0.15 / 0.75 / S1 Return roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of manufacture: 2001 Incline/decline: adjustable Optional extras: Support stands Single- or double-sided side guides Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please do not hesitate to contact us. You can reach us easily by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics