Klin nakup rabljenega (689)

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 315 mm - Change jaws: soft - Short taper mount: Ø 135 mm - Bolt circle: 172 mm - Weight: 90 kg Itodpfx Ahsb A Rqls Aer

Leto izdelave: 2000, Stanje: dober (rabljeno), 3-jaw wedge bar chuck Manufacturer: SMW Type: HG 200, year approx. 2000 Itedpfxsd Sym Aj Ah Aor Bore: 50 mm Flange mounting diameter: 170 mm Without jaws, with chuck key. Chuck in good condition.

Stanje: generalkompletno obnovljen (rabljeno), Long-cut wedge saw Mitre adjustment via stop arm and indexing holes Machine equipped with two-hand safety control Saw blades up to 800 mm diameter Itedpsd Szf Rsfx Ah Aor Extraction ports at relevant positions Horizontal and vertical workpiece clamps Saw blades, extraction systems, and roller conveyors/length stops available on request.

Stanje: rabljeno, Delilni klin za okvirno žago Valji z električnim pogonom Itjdpexd Ub Usfx Ah Aer Na voljo sredi oktobra Lokacija: Avstrija, blizu Leoben

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, 1 used powered splitting wedge Arta/C, workshop reconditioned Iodpjqvz U Eefx Ah Ajtr Feed rollers and motor with new bearings New tips Opening width: 430 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Möhringer splitting wedge with large opening and pressure roller. Also adjustable across the center. Ijdjv Tbxpopfx Ah Aetr

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 195 mm - Interchangeable jaws - Weight: 12 kg Ijdpfx Ahjb A Ihvo Ajtr

Stanje: zelo dobro (rabljeno), Guide bars 1250 mm long x 460 mm high, sturdy steel base frame with 2 guide shafts and 4 adjustment spindles each; can be mounted behind any type of saw frame. To match, there are also 2 robust, toothed pressure roller units, each with 4 ball bearings. Ijdpfx Aheui Ifco Aotr

Stanje: dober (rabljeno), Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck diameter: Ø 200 mm Itsdpfxjb A Rane Ah Asr - Interchangeable jaws - Taper: 69 mm - Thread: M 95 x 4.5 mm - Weight: 26 kg

Stanje: rabljeno, Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck - Chuck size: Ø 165 mm - Recess mount: Ø 125 mm - Bolt circle: 140 mm (3x M10) Iodpfob A R Tnjx Ah Aetr - Inner diameter: 40 mm - Speed: max. 4000 rpm - Weight: 12 kg

Stanje: rabljeno, Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 216 mm - Spigot recess: mm - Pitch circle diameter: mm - Through-hole: 50 mm - Soft interchangeable jaws - Dimensions: Ø 216/H75 mm - Weight: 18.7 kg Itodpfxsdqck He Ah Ajr

Stanje: rabljeno, Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 290 mm - Mounting recess: Ø 268 mm Iodpfsb E N Txox Ah Aetr - Bolt circle: Ø 168 mm - Through bore: Ø 70 mm - Weight: 43.5 kg

Stanje: rabljeno, Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Itjdpednaz Nofx Ah Asr - Chuck size: Ø 220 mm - Mounting taper: Ø mm - Mounting bolt circle: mm - Through bore: 50 mm - Interchangeable jaws - Weight: 25 kg

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 400 mm Širina kolesa 400 mm Modul - maks. 15 Modul - min. 0,5 Itedpexqrhxefx Ah Ajr Krmiljenje Klingelnberg Teža obdelovanca 300 kg Kot nagiba - maks. 0 - 90 ° Razdalja med konicami 15 - mm Teža stroja pribl. 1,9 t Potrebni prostor pribl. 2,3 x 1,8 x 2,4 m Popolnoma avtomatski CNC-merilni center za zobnike za cilindrična zobljenja in druge oblike zobljenja, odvisno od programske opreme. Naprava za merjenje notranjega zobljenja. Programska oprema: - cilindrični zobnik, rezkar, polž

Leto izdelave: 2002, Stanje: rabljeno, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1.5 Control system: Sinumerik 840C Gear width 5.5 mm Helix angle 0/60° Number of teeth - max. 120 Number of teeth - min. 5 Transmission ratio max. 1:10 Transmission ratio min. 1:1 Workpiece spindle speeds max. 110 mm Cutter head speeds 20-110 rpm Total power requirement 100 kW Machine weight approx. 16,700 kg Iedpfx Ahegtvbpj Aotr Space required approx. 5200x2300x2400 mm

Stanje: novo, Orodni vreteno 0.533.518.3 za Klingelnberg stroj za zobnike, strm stožec 1:3,975, dolžina = 228 mm, Ø priključka: 150 mm, Ø prirobnice: 186 mm, Ø priključka za orodje: 99 mm, nerabljen v originalni embalaži, 100 % funkcionalen, dobava po slikah. Iedpfoxtwcyex Ah Ajtr

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2025, Oprema: dokumentacija / priročnik, For sale is a complete industrial filling, capping, labeling, and banderole application line for automated processing of cylindrical cans, including a compressed air supply system. The line is technically coordinated, has been used in real-world operations, and is ready for immediate production startup. Application Area: - Cylindrical PET cans, reference format: 75 ml – 400 ml. - Suitable for tobacco, shisha tobacco, food, cosmetics, as well as other non-food products. - Multi-format capability (format-dependent adaptation possible) Line Configuration / Main Components Feed System: 2× format-adjustable rotary tables Rotary table 1 is for feeding empty cans Rotary table 2 is for supplying lids Dosing & Filling: REX vacuum filler RVF 327, year of manufacture 2017 Precise product dosing Fillpack filling and capping machine R01-TI, year of manufacture 2022 Can filling Placement of sealing membrane Welding of sealing membrane as tamper-evident seal Fitting and screwing of lid Labeling: CDA NINON labeling machine, year of manufacture 2021 Itedpfx Ahex Hzzpo Aer Lid labeling Wrap-around/body labeling Transfer by conveyor belt Weight Control: Garvens S2 conveyor checkweigher, year of manufacture 2002 Inline weight control Automatic ejection of out-of-spec products Banderole Application / Tax Stamp: ECOMA can banderole applicator, year of manufacture 2022 Affixing fiscal or security banderoles CE-compliant Output up to approx. 35 cans/min (depending on format) Compressed Air Supply (included): COMPRAG screw compressor ARD-1510, year of manufacture 2022 15 kW, max. 10 bar, 1.9 m³/min COMPRAG compressed air tank RH-500, 500 liters Including refrigeration dryer System newly procured in 2022, optimally matched to the line. Additional Unit Tumbler / Mixer Vacuum function defective Mechanical mixing function present Offered as an additional unit without warranty. Technical Summary Degree of automation: high / fully automatic Tamper-evident closure: welded sealing membrane Quality assurance: inline checkweigher CE certification: available Years of manufacture overall: 2002–2022 Condition Used, fully functional, from ongoing production. Scope of delivery: Complete production line as described Conveying technology between the modules Format parts for 75 ml cans Controls and control cabinets Compressed air system Inspection: Inspection by appointment is expressly possible.

Stanje: rabljeno, Plate length 1050 mm Plate width 1050 mm Isdpfx Asu Sbfkoh Aetr Plate height 60 mm Machine weight approx. 0.2 t Space requirement approx. 1050x1050x0.1 m Clamping plate for a PFSU 1600, Ø 1050 mm

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stöcklin EFP 35 OSS Prisma Cross-Seat Low-Lift Pallet Truck Isdpfx Asx Af H Eoh Astr for paper rolls - cable drums - rolls Year of manufacture: 2021 Battery: 2022 / Lithium-ion (Inspected by a specialist company on 26.03.2025 with protocol) Operating hours: 291 Rated capacity: 3500kg Prisma forks Long wheelbase Fork length: 1900mm Width across forks B3: 1600mm Lowered fork height: 280mm Fork lift: 205mm Machine width: 800mm Floor plate – adjustable function Load rollers 2 x 200 x 55 in cast polyamide GSPO With charger (Inspected by a specialist company on 26.03.2025 with protocol)

Stanje: rabljeno, Leto izdelave: 2007, Wheel diameter – max. 500 mm Hypoid adjustment ±70 mm Axle cross angle 90° Y-axis distance 150 – 350 mm Z-axis distance 120 – 340 mm Speed range – stepless 0 – 5000 rpm Spindle torque 57 Nm Taper 99.2 mm Drawbar force – tool clamping 23,000 N Braking torque max. 93 Nm Total connected load 20 kVA Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. 2.35 x 2.24 x 2.5 m Itedpfjukitxex Ah Asr Working area: Crown wheel diameter max. – 500 mm Hypoid adjustment X (v) – ±70 mm Axle angle – 90° Distance Y-(H) axis crown wheel/flange pinion spindle – 150 ... 350 mm Distance Z-(J) axis pinion/flange crown wheel spindle – 120 ... 340 mm Pinion spindle head: Speed range, stepless – 0 ... 5000 rpm Torque – 57 Nm at n = 0 ... 1240 rpm Torque – 54 Nm at n = 1240 ... 5000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) Drawbar force for tool clamping max. – 23,000 N Crown wheel spindle head: Speed range, stepless – 0 ... 3000 rpm Torque – 95 Nm at n = 0 ... 750 rpm Torque – 93 ... 24 Nm at n = 750 ... 3000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Drawbar force – max. 23,000 N Max. crown wheel braking torque – 93 Nm up to 3000 rpm pinion speed at i = 1:4 Max. crown wheel braking torque – 93 Nm up to 1200 rpm pinion speed at i = 1:1.6 Max. crown wheel braking torque – 59 Nm up to 1200 rpm pinion speed at i = 1:1 Electrical: Total connected load – 20 kVA (machine effective power) Voltage – 3 x 400 V (others on request) Voltage tolerance – ±10% Frequency 50 Hz (others on request)

Stanje: novo, Klingelnberg probing rod for CS200, unused in original packaging, 100% functional, scope of delivery as shown in photos. Itodpfx Ahji Ebv Sj Aor

Stanje: dober (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stöcklin EFP 35 OSS Prisma Cross-Seat Low-Lift Pallet Truck for paper rolls - cable drums - rolls Year of manufacture: 2021 Battery: 2022 / Lithium-ion (Inspected by a specialist company on 26.03.2025 with protocol) Operating hours: 291 Rated capacity: 3500kg Prisma forks Long wheelbase Fork length: 1900mm Iedpox Af Hxefx Ah Astr Width across forks B3: 1600mm Lowered fork height: 280mm Fork lift: 205mm Machine width: 800mm Floor plate – adjustable function Load rollers 2 x 200 x 55 in cast polyamide GSPO With charger (Inspected by a specialist company on 26.03.2025 with protocol)

Stanje: rabljeno, Leto izdelave: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Workpiece diameter – max. 275 mm Gear width max. 5.5 mm Spiral angle 0 – 60° Number of teeth 5 – 120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Total power requirement 62 kVA Machine weight approx. 12 t Machine dimensions approx. 4.7 x 4.387 x 2.45 m Tool spindle (D-axis) - Workpiece spindle speed (infinitely variable) 60 to 350 rpm Tool positioning axis (E-axis) - Swivel range 0 to 360° - Max. swivel speed 19.5°/s Workpiece spindle (B-axis) - External taper mounting diameter (1:4) 140 mm - Standard version internal taper (1:20) 99.218 mm Ijdpfx Asd Il R Aoh Astr - Maximum workpiece spindle speed 300 rpm - Workpiece spindle bore 90 mm Workpiece positioning axis (Y-axis) - Travel 870 mm - Max. travel speed 4.5 m/min Hobbing rotation axis (A-axis) - Swivel range 315° - Max. swivel speed 40°/s Axis offset (Z-axis) - Travel range max. +/- 50 mm - Max. travel speed 0.657 m/min Workpiece swivel axis (C-axis) - Swivel range -8.5 to 98° - Max. swivel speed 21.5°/s Milling depth axis (X-axis) - Travel -25 to 640 mm - Max. travel speed 6 m/min Machine distance axis (V-axis) - Travel 150 mm - Max. travel speed 1.6 m/min - Including 13 cutters -

Leto izdelave: 2007, Stanje: rabljeno, Wheel diameter - max. 400 mm Wheel width - mm Module - max. - Workpiece diameter 36–300/400 mm Centre distance 135–290 mm Spindle speed - infinitely variable, up to 3,000 rpm Centre distance between centres 100–550 mm Control system Machine weight approx. 4,000 kg Space requirement approx. 2,000 x 3,055 x 2,788 mm Control system: CNC Siemens 840 D Testing methods: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli test in double flank contact Features: - Up to 6 testing carriages available - Highest test accuracy and repeatability - Machine table with workpiece drive - Swivelling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron) Itedpfegr Harjx Ah Ajr

Leto izdelave: 2004, Stanje: rabljeno, z-axis travel 200 mm Max. clamping diameter for cutter heads 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting taper nominal diameter for cutter heads 500 mm Itedpfx Ahevq Sd Ro Ajr Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the production process of spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, a high gear quality and long tool life can only be achieved with precisely adjusted cutter heads. The CS 200 cutter head setting and inspection device enables quick and easy adjustment of the individual cutters, checks their positions, and documents the measurement results. The measuring cycle on the CNC-controlled inspection device is semi-automated: process steps are displayed to the operator on the screen for guided handling. The positioning of the individual cutters in the cutter head, as well as the height location of the cutter tips, is handled largely automatically via a special procedure and is simultaneously documented through a concentricity diagram. A subsequent measuring cycle checks the radial positions of all inner and outer cutting edges in the cutter head. If individual inspection parameters do not meet the specified tolerances, they can be individually re-adjusted. Thanks to the combination of a semi-automated setting process, operator-guided setup actions, and automatic measuring cycle, cutter heads can be conveniently, quickly, and with high precision. Operator-Guided Setting and Inspection Process - Graphical representation of cutter head configuration and measurement results with tolerance verification - Operator instructions in plain text (no coded information) - Easy assignment of measurement results to the respective cutters - Documentation of setting and measurement results via printer - Setting and inspection process suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data