Stroj Klink nakup rabljenega (35)

Stanje: dober (rabljeno), Stroj za vlečenje utorov / struženje KARL KLINK RSI 2,5 EH -Leto izdelave: 1965 -Vlečna sila: 2500 kg / (25 kN) -Hitrost utora: 1 mm/min do 9 mm/min (brezstopenjsko nastavljivo) -Maks. hod: 800 mm -Maks. premer obdelovanca: pribl. 250 mm -Motor: pribl. 3 kW -Naprava za hlajenje -Prikaz vlečne sile -Omejitev vlečne sile -Različne vodilne puše (glej slike) -Noge stroja Dimenzije: DxŠxV 1,1x0,7x2 metra / Teža 1600 kg Možne so napake in tipkarski popravki. Fgodpfx Asymz N Eoplob

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1963, skupna masa: 3.000 kg, skupna dolžina: 3.900 mm, skupna širina: 800 mm, skupna višina: 1.850 mm, TEHNIČNE PODROBNOSTI Hod: 1.500 mm Kapaciteta: 10 t Moč motorja: 7,5 kW PODROBNOSTI STROJA Krmiljenje: konvencionalno Dimenzije & Teža Dimenzije (D x Š x V): 3.900 x 800 x 1.850 mm Lastna teža: 3.000 kg Transportni paketi: 2 Fgjdpfx Aey Himmepljb OPREMA Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1980, Info: Stroj je bil vgrajen v jami! - Vlečna sila: maks. 25.000 kg - Hodi dviga: maks. 630 mm - Hitrost pomika: 1 - 10 m/min - Hitrost povratka: 7 - 25 m/min Fodpfx Apsy H Ia Seljgb - Skupna priključna moč: 45 kW - Teža stroja: 5.500 kg Po želji lahko organiziramo transport in nakladanje po vsej Evropi za doplačilo. Cene so brez DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše ekipo vam z veseljem pomaga. Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJARSKIH STROJEV IN DRUGEGA. Potrebujete kakovosten, a cenovno ugoden stroj za vašo proizvodnjo? Ali želite svojega prodati? Za več informacij ali kontaktne možnosti nas dosežete preko kontaktnega obrazca.

Stanje: dober (rabljeno), Leto izdelave: 2004, - Vlečna sila: maks. 160 kN - Hod gibanja: maks. 1000 mm - Hod pomika orodja: maks. 630 mm - Širina namizne plošče: 630 mm - Hitrost gibanja: 10 m/min - Hitrost povratka: 23 m /min Fgjdpfxsy H Iaxj Apljb - Instalirana moč: maks. 88 kW - Teža stroja: 12.410 kg Na zahtevo lahko za doplačilo organiziramo prevoz in nakladanje po vsej Evropi. Cene so brez DDV. Ogled možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV, ORODJEV IN DRUGEGA STROJEVARSKEGA PROGRAMA. Potrebujete kakovosten, a cenovno ugoden stroj za vašo proizvodnjo? Ali želite svojega prodati? Za več informacij ali kontaktne možnosti nas lahko kontaktirate preko kontaktnega obrazca.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 03.2456, CNC internal broaching machine Arthur Klink Fgjdoirwiqepfx Aplob RISH 6.3X1000X400 Overhauled in 2016

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je navpični notranji vretenasti stroj (räumlni stolp) Karl Klink z dvižno mizo in portalom za nalaganje. Moč broširanja: 63kN, hod broširanja: 1000mm, hod vretena: 400mm, hitrost broširanja: 7,5m/min, hitrost povratka: 24m/min, postaj: 1, širina mize: 500mm. Dimenzije stroja X/Y/Z: cca 3700mm/3000mm/3200mm, teža: cca 3500kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Fgjdpfxjxwcvmo Aplob

Leto izdelave: 1965, stanje: rabljeno, številka stroja/vozila: 2112, Color: green Pulling force: 2.5 t Fedpfxjbrclvj Apljgb Lift: 1000 mm Weight: 1.2 t 3 kW Footprint: approx. 140 x 130 cm

Leto izdelave: 1984, stanje: rabljeno, številka stroja/vozila: 16700, Color: white With magnetic panel feed, automatic feeding system, Tensile force: 10 tons Fedpfx Asbrclqoplogb Stroke: 1200 mm Weight: 6 tons Footprint: approx. 160 x 140 cm

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: 3167, Clearing force: 16 t Fgsdpfx Aeccxqteplob Lift: 1600 mm Weight: 8.5 t

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Fgodpfjr A Hcbex Aplsb Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Fgodpjhpqqusfx Apljb Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Fodpfegyd T Eox Aplsgb Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Fjdpsgyd S Sjfx Aplsgb Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been completely overhauled and is therefore in very good condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Fgedpfjr A Hdgjx Apleb Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Leto izdelave: 1964, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Fgsdpfxet Dv I Aj Apleb Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1966, skupna masa: 7.000 kg, vhodna napetost: 380 V, dolžina bročanja: 1.500 mm, število bročirnih položajev: 3, premer obdelovanca (maks.): 575 mm, skupna višina: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching positions Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching positions: 3 Distance between broaching positions: 2 x 145mm Clamping diameter for broach pullers: 3 x Ø 85mm Clear width between columns: max. 580 mm Cutting speed: hydraulically continuously variable from 1 m/min up to max. 7 m/min Return speed: hydraulically continuously variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. height 5,100 mm with tool loader raised) Power supply / Connected load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching positions. The tool clamping system is designed for mechanical spring-locking in the pull bridge and loader. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimum utilization, installation in a pit (foundation) is ideally required, or alternatively, on a platform. Broach pullers and knock-out devices available on request. The machine can be inspected under power at our facility. Fgsdpfx Apowql Rvsljb General Information: We constantly have a large selection of around 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg in both horizontal and vertical configurations in stock. A significant number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as broach pullers, knock-out devices, broaching tools, and other specific accessories. We are a contract broaching operation by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries you may have.

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Fodpfx Apjixntwelsgb Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1961, stanje: rabljeno, General / Technical Data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Tensile force: 10 t Fgedpfolwu Hrox Apljb Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Fodpfx Asgyd Sveplegb Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1964, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Fedpfxjgyd S Dj Aplegb Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1962, stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Mounting diameter for draw heads: 3 x Ø ___ mm Passage width between cylinders: max. XXX mm Fgjdpfx Apst Dwb Dslsb Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1983, stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Fgsdpfx Asd Nb A Njplsb Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Fgedpelpadyefx Aplsb Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.900 kg, moč: 8 kW (10,88 KM), vhodna napetost: 380 V, število bročirnih položajev: 1, skupna širina: 6.100 mm, skupna višina: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine no.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in the crossbeam: 85 mm Broaching tool clamping: Universal pull head for flat shanks up to 25 mm width Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Fodpfxsxtcz Ie Aplegb Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant/lubricant system • A basic oil drip tray is mounted on the machine bed without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. Broaching needles, arbors and pull heads can be supplied upon request.

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder Fsdpfotuuvzex Apljgb • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.