Notranji pehanje stroj

Arthur Klink RISZ 10x1000x400

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle Ledpfoxmhdnex Aacohc - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, x-hod 300 mm y-hod 200 mm z-hod 350 mm Površina stola za stezanje 700 x 270 mm Konus prihvata glavnog vretena ISO 40 Broj obrtaja 8: 150 - 1660 o/min Raspon obrtaja - horizontalno 8: 110 - 1230 o/min Posmici 8: 25 - 285 mm/min Težina 900 kg Hod pinole 60 mm Ukupna potrebna snaga 3,7 kW Dimenzije D-Š-V 1,3 x 1,38 x 1,65 m Univerzalna alatna glodalica sa 2-osnom digitalnom indikacijom i zakretnom vertikalnom glavom sa pinolom, fiksnim i zakretnim stolom, udarnim uređajem sa brojem hodova 43, 59, 84 u minuti, automatskim posmicima i brzim hodovima u sva tri pravca. Mašina je vrlo malo korišćena, iz servisne radionice, tačnost je odlična! Nova cena cca € 24.000. Naša cena je specijalan fiksni iznos! Radi se o polovnom predmetu, prodaja isključuje bilo kakvu garanciju. Lhjdpfovxllkex Aacsc SKLADIŠNI DILER SA IZLOŽBENOM HALOM OD 1600 m².

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: Lhjdpsrz Nfljfx Aacec - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Lhsdpfx Aasd Nb A Nocjc Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 8.185 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis DMG DMU 60 evo Linear machining center was manufactured in 2013, featuring travels of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a 60-position tool magazine. It is equipped with a Heidenhain iTNC 530 control unit, internal coolant supply at 40 bar, and a chip conveyor with hinged belt. Ideal for complex machining tasks. Contact us for more information about this machine. • Tool magazine: 60 positions • Rapid traverse: 80 m/min • Dynamic package • Internal coolant: 40 bar • Swiveling observation window • Bed flushing system with rinse gun • Operating hours: 14,471 h • Spindle hours: 8,185 h Additional equipment • Hinged belt chip conveyor Lodpex D Dyaofx Aacohc • Paper band filter, 600 liters • Oil and emulsion mist separator • Heidenhain TS 649 touch probe • 3D quickSET tool kit Technical Specification Tool taper: HSK 63

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev Ljdpfjt U Rm Iox Aacjhc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4E184001, premer struženja nad prečnim suportom: 430 mm, stružna dolžina: 670 mm, premer struženja: 220 mm, izvrtina vretena: 45 mm, največja hitrost vretena: 6.300 obr/min, skupna masa: 4.300 kg, Rabljeni CNC stroj za trdo struženje s protivretenom Proizvajalec: EMCO Tip: Emcoturn 45E Ljdpfxew Rrvwe Aacehc Leto izdelave: 2018 Delovne ure: malo Krmiljenje: Siemens 828D Število pogonskih orodij: 12 kosov Največje število vrtljajev: 0–6000 min⁻¹

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Največji premer zobnika: 400 mm Širina zobnika: 76 mm Lhsdjwvbqijpfx Aacsc Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Modul: maks. 6 mm Teža stroja: približno 7500 kg Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: rabljeno, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4,290 h Controller: YASKAWA Total power requirement: 35 kVA Total weight approx.: 2,000 kg Dimensions (L x W x H) – Robotic welding cell: 2.7 x 1.1 x 2.0 m Dimensions control cabinet: L: 700 x W: 800 x H: 2,000 mm Welding Robot System includes: Robot specifications: - 6 degrees of freedom - Maximum payload: 20 kg - Working envelope: rotation curve = 1,717 mm, vertical reach = 1,417 mm, horizontal reach = 2,072 mm - Axis movement ranges: S-axis rotation = +/-180°, L-axis lower arm = +155° / -110°, U-axis upper arm = +255° / -165° - Wrist joint axes: R-axis roll = +/-200°, B-axis pitch/yaw = +230° / -50°, T-axis rotation = +/-360° - Axis speeds: S and L axes = 170°/s; U-axis = 175°/s; R and B axes = 355°/s; T-axis = 525°/s - Permissible torque: R and B axes = 39.2 Nm; T axis = 19.6 Nm Welding unit specifications: - Make: Fronius, TIG welding (AC/DC), current range 3 A / 10.1 V - 300 A / 22.0 V, water-cooled, protection class IP23 Positioner/table unit specifications: - Table surface Ø 600 mm, 360° rotation, swivels 90° left/right Wire feed specifications: Lhsdpeu Nwfbefx Aacsc - Fronius, type KD 7000, feed rate 0.2 - 22 m/min, protection class IP23, input voltage U1 230 V Hand-held control unit Control cabinet i.d. *

Stanje: dober (rabljeno), Leto izdelave: 1972, LZ-strojni stružnica Izdelovalec: HEIDENREICH & HERBECK Tip: 21RO l. 1972 s hitromenjalnim držalom Parat (10 kosov), dokumentacija za stroj, natančni kazalnik navojev, koničast hrot, 250 mm Forkardt vpenjalno glavo. Premer struženja nad posteljo: 430 mm Premer struženja na suportu: 255 mm Dolžina med konicama: 1000 mm Dolžina struženja: 750 mm Hitrosti vretena: 19–2000 min⁻¹, motor 5,5 kW Premer luknje vretena: 56 mm Ostali podatki v tehničnem listu Potrebni prostor: dolžina 2900 mm, širina 1100 mm, višina 1300 mm, teža cca 1750 kg. Strojna dokumentacija priložena. Vgrajena hladilna naprava, zadnja stena za odvajanje odrezkov. Stroj je v dobrem stanju, možen preizkus pod tokom. Lhsdpfx Aaot Ipi Iscec